1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your KING BOX K787 DVB-S2 1080P Satellite TV Receiver. Please read this manual thoroughly before using the device to ensure proper functionality and safety.
Important Note: This receiver is primarily designed for use in Africa and Asia. It is not compatible with EU countries. Please contact the seller for clarification regarding IKS and Apollo5 services before purchase.
2. Safety Precautions
Please read the following safety precautions carefully before operating this receiver:
- Before operating, please check the unit's operating voltage is 100~240V AC 50/60Hz.
- Do not overload a wall outlet, extension cord, or adapter. Do not use damaged power cords or touch them with wet hands, as this may result in electric shock.
- The receiver shall not be exposed to dripping or splashing water, and no objects filled with liquids, such as vases, shall be placed on the apparatus.
- Keep the slots on top of the receiver uncovered to allow sufficient airflow to the unit. Do not put the receiver on soft furnishings or carpets.
- Do not expose the receiver to direct light or place it near a heater or in humid conditions. Do not stack other electronic equipment on top of the receiver.
- Unplug the receiver from the wall outlet before cleaning. Clean the receiver with a soft cloth or mild solution of washing-up liquid (no solvents).
- Disconnect the receiver from the mains when you connect it to a satellite LNB or disconnect it from an LNB. Failure could possibly cause damage to the LNB.
- Place the receiver indoors to avoid lightning, rain, or direct sunlight.
- Do not remove the cover to reduce the risk of electric shock. Contact qualified and licensed service personnel to repair the receiver, or contact your dealer.
3. Package Contents
Carefully unpack your KING BOX K787 Satellite TV Receiver and check for the following items:
- KING BOX K787 Satellite TV Receiver Unit
- Remote Control Unit (RCU)
- Power Adapter
- HDMI Cable
- IR Extender Cable
- User Manual (this document, also available as PDF: User Manual PDF)
- Note: Batteries for the remote control are not included.
4. Product Overview
4.1. Receiver Panel Layout
The following describes the name and function of each part on the receiver panel:
| Port/Control | Function |
|---|---|
| DC-12V | Connect to the power using the provided Power adapter. |
| USB2.0 | Two USB 2.0 Host Ports. For hard-disk usage, insert before booting up. |
| RS232 | Connect to a computer using a serial line. |
| TUNER | Connect the satellite antenna cable. |
| IR-EX | Connect to the remote using an IR line. |
| DV-OUT (HDMI) | Connect to the TV using an HDMI cable. |
| AV | Connect to the TV using an AV cable. |
4.2. Remote Control Unit (RCU)
You can control this receiver with the provided remote controller with full function.
- POWER: Turns the receiver on/off.
- MUTE: Mutes audio.
- NUMERIC KEY (0~9): Enter a TV/radio channel number or menu option number.
- SUB: Display the subtitle language list.
- TV/R: Switch between TV and RADIO.
- RECALL: Show the previously viewed channels list.
- TXT: Display the teletext.
- FAV: Set channels as favorite.
- MENU: Activate main menu.
- EXIT: Exit current menu step by step.
- VOL+/VOL-: Changes volume in viewing mode.
- CH+/CH-: Changes program.
- OK: Confirm the selected operation or display the Channel list.
- AUDIO: Display the audio list.
- INFO: Display the program information.
- PAGE ▲/▼: Moves up/down a page in the list.
- SAT: Show the scanned satellite list.
- EPG (Electronic Program Guide): Display the program guide.
- ◄◄ / ►►: Fast rewind / Fast forward.
- ►: Play.
- ■: Stop / Enter USB menu.
- |◄◄ / ►►|: Previous / Next.
- ||: Pause / Time shift.
- ●: Record.
- USB: Enter USB menu.
5. Setup
Follow these steps to set up your KING BOX K787 receiver:
- Connect Antenna: Connect your satellite antenna cable to the "TUNER" port on the receiver.
- Connect to TV:
- For high-definition, connect an HDMI cable from the receiver's "DV-OUT" port to an HDMI input on your TV.
- Alternatively, for standard definition, connect an AV cable from the receiver's "AV" port to the corresponding AV inputs on your TV.
- Connect IR Extender (Optional): If using the IR extender, connect it to the "IR-EX" port on the receiver and position the extender's sensor where it can receive signals from your remote control.
- Connect Power: Connect the provided power adapter to the "DC-12V" port on the receiver, then plug the adapter into a suitable power outlet (100~240V AC 50/60Hz).
- Insert USB Device (Optional): If you plan to use a hard disk or USB drive for media playback or PVR functions, insert it into one of the "USB2.0" ports before powering on the receiver.
- Power On: Switch on your TV and select the correct input source (HDMI or AV) that the receiver is connected to. Then, power on the KING BOX K787 receiver.
- Initial Installation: Upon first power-on, the receiver may guide you through an initial installation wizard. This typically involves setting up antenna, USALS, and performing a channel scan. Refer to the "Installation" section in the Menu Operation for details.
6. Operation
6.1. Menu Operation
To access the main menu, press the MENU button on your remote control. Navigate through the menu using the arrow keys and confirm selections with the OK button. Press EXIT to go back one step or exit the menu.
6.2. Channel Setup
In this menu, you can edit channels, edit favorites, sort channels, and delete satellite channels.
6.3. System Setting
- Menu Language: Press the volume keys to set the menu language.
- OSD Setting: Adjust the color and transparency of the On-Screen Display (OSD).
- Parental Control: Set limits for programs or change your password.
- Color Setting: Adjust Brightness, Contrast, and other color settings.
- Timer Setting: Set the current time, add event timers, and set up the sleep timer.
6.4. Installation Menu
In the Installation menu, you can choose games, play media files (music, movies), and view information about the Set-Top Box (STB), such as Model ID, Hardware Version, and Software Version.
7. Specifications
| Feature | Description |
|---|---|
| Compliance | Fully DVB-S/DVB-S2/MPEG-2/MPEG-4/H.264 compliant |
| Video Resolution | 480i/480p/576i/576p/720i/720p/1080i/1080p (depends on TV system) |
| Audio Support | AAC and HE-AAC audio, optionally supports Dolby/Dolby plus |
| Channel Management | Auto/Manual search TV/Radio channels, up to 1000 channels list, Parental lock, Channel editing (delete, favorite, rename) |
| Aspect Ratio | 16:9 and 4:3 |
| Connectivity | HDMI (DV-OUT), RCA (AV), RS232, USB2.0 |
| OSD & EPG | Multi-language OSD and Subtitle, 7-days EPG (Electronic Program Guide) |
| Recording Features | PVR recorder, Teletext, Timeshift, LCN (Logic Channel Number) |
| Demodulation | DVB-S2: QPSK/8PSK; DVB-S: QPSK |
| DiSEqC Support | DiSEqC 1.0/1.1/1.2/1.3 (USALS) supported, Universal LNB, NIT search support |
| Model Number | King Box K787 |
| Type | DIGITAL |
| High Definition | Yes |
| FTA (Free To Air) | Yes |
| Package | Yes |
| With USB Wifi | No (Optional: models with WiFi available) |
| Origin | Mainland China |
| Certification | CE |
8. Troubleshooting
If you encounter issues with your receiver, refer to the following common problems and solutions:
- No message displayed on the front display:
- Check the main power cable and ensure it is plugged into a suitable power outlet.
- Check that the mains supply is switched on.
- No picture:
- Make sure that the product is powered on and in operation mode.
- Ensure the AV/HDMI/YUV cable is firmly connected to the TV.
- Ensure the antenna cable is properly connected to the product.
- Poor picture/sound quality:
- Make sure there is no mobile phone or microwave oven near the product.
- Check the signal levels and adjust the antenna direction to get a better picture.
- No or poor sound:
- Check that your AV/HDMI cable is connected correctly.
- Ensure your TV is not on mute.
- Remote control does not operate:
- The top end of the remote control should point directly towards the receiving part of the product.
- Replace with new batteries (not included).
- Cannot connect to network:
- Make sure your network is functioning correctly.
- Ensure the Ethernet cable is inserted firmly to the LAN router or WiFi is connected (if using a WiFi dongle).
9. User Tips
- Channel Capacity: The receiver supports a channel list of up to 1000 channels. While it can store many, exceeding this limit might affect performance.
- Regional Compatibility: As noted, this receiver is intended for Africa and Asia. Users in other regions, particularly Europe or North America, may experience compatibility issues with satellite services.
- WiFi Connectivity: Some models come with built-in WiFi, while others require an external USB WiFi dongle. Ensure you have the correct setup for your needs if network features are important.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact your retailer. A digital version of this user manual is available for download: User Manual (PDF).
