CYCLAMI Z5L

CYCLAMI Z5L Electric Pump Tire Inflator User Manual

Model: Z5L | Brand: CYCLAMI

1. Introduction

Thank you for choosing the CYCLAMI Z5L Electric Pump Tire Inflator. This portable and cordless device is designed for convenient and efficient inflation of various items, including bicycle tires, car tires, and sports balls. Featuring a digital display, preset pressure modes, and emergency lighting, it offers a reliable solution for your inflation needs. Please read this manual thoroughly before use to ensure proper operation and maintenance.

CYCLAMI Z5L Electric Pump in hand, highlighting 130 PSI, preset tire pressure, and emergency lighting.
The CYCLAMI Z5L Electric Pump, showcasing its compact design and key features.

2. Safety Information

  • Keep the device away from children.
  • Do not expose the device to extreme temperatures or direct sunlight.
  • Avoid using the device in wet conditions or near flammable liquids/gases.
  • Ensure the correct nozzle is used for the item being inflated to prevent damage.
  • Do not over-inflate items; always refer to the recommended pressure.
  • If the device overheats, allow it to cool down before further use.

3. Package Contents

Please check the package for the following items:

  • CYCLAMI Z5L Electric Pump
  • SV Extension Tube
  • Adapter (for French valves)
  • Balloon Needle
  • USB Type-C Charging Cable
  • User Manual
Contents of the product package, including the pump, hose, various nozzles, and USB-C charging cable.
All items included in the CYCLAMI Z5L package.

4. Specifications

ParameterZ5L
Maximum Pressure130 PSI
Battery Capacity2000*2 mAh
Air Volume15 L/min
Pressure Setting Range4-130 PSI
Charging MethodType-C
Charging Time180 min
Size113.5*70*38.5 mm
Weight~381g
Orifice TypeAV/FV (American Valve/French Valve)
MaterialABS+PMMA
Operating Noise~76dB
Auto StandbyYes
Display ScreenYes
Overheat ProtectionYes
Operation Keys5 Mechanical buttons
Extended HoseYes
Parameter comparison table for the Z5L pump against other models.
Detailed specifications of the Z5L Electric Pump.

5. Setup

5.1 Charging the Device

  1. Connect the provided USB Type-C charging cable to the charging port on the pump.
  2. Connect the other end of the cable to a suitable USB power adapter (not included) or a computer USB port.
  3. The display will indicate charging status. A full charge takes approximately 180 minutes.
  4. Ensure the device is fully charged before its first use for optimal performance.

5.2 Attaching the Hose and Nozzles

  1. Screw the SV extension tube securely onto the air outlet of the pump.
  2. Select the appropriate nozzle for the item you wish to inflate:
    • SV Extension Tube: Suitable for mountain bikes, e-bikes, motorcycles, and cars.
    • SV Extension Tube + Adapter: For French valves on road bikes and individual mountain bikes.
    • SV Extension Tube + Balloon Needle: For inflating soccer balls, basketballs, swimming rings, etc.
  3. Attach the selected nozzle firmly to the end of the SV extension tube.
Visual guide to multiple accessories and their applications for different items like bicycles, motorcycles, cars, and balls.
Different accessories for various inflation needs.

6. Operating Instructions

6.1 Power On/Off

  • Press and hold the power button (usually marked with a power symbol) to turn the device on or off.
  • The digital display will light up upon powering on.

6.2 Digital Display and Unit Selection

  • The digital display shows real-time air pressure and selected modes.
  • Press the 'M' button to cycle through different preset modes (e.g., bicycle, motorcycle, car, ball).
  • Press the unit button (usually marked with a 'U' or 'PSI/BAR') to switch between PSI and BAR pressure units.
Digital display showing real-time pressure and mode icons (motorcycle, car, bicycle).
The digital display screen with real-time pressure and mode indicators.

6.3 Setting Target Pressure and Inflation

  1. Connect the appropriate nozzle and hose to the item you wish to inflate.
  2. Select the desired preset mode using the 'M' button.
  3. Use the '+' and '-' buttons to adjust the target pressure. The display will show the current pressure and the target pressure.
  4. Press the start/stop button (often the power button or a dedicated play/pause symbol) to begin inflation.
  5. The pump will automatically stop once the target pressure is reached, thanks to its built-in tire pressure sensor.
Close-up of the pump inflating a bicycle tire, demonstrating preset tire pressure and auto start/stop.
The pump automatically stops when the preset pressure is reached.

6.4 Emergency Lighting Function

  • The pump features a built-in LED light for emergency situations or low-light conditions.
  • Press the light button (usually marked with a light bulb symbol) to turn the LED on or off.
The pump being used as an emergency flashlight, illuminating a bicycle tire.
Using the pump's emergency lighting feature.

6.5 Recommended Inflation Pressures

Refer to the table below for general recommended inflation pressures. Always check the specific recommendations for your item.

FormProduct TypePressure Range
BikesFolding Bike45-50 PSI
12, 14, 16 Inch Bicycle Tires30-50 PSI
20, 22, 24 Inch Bicycle Tires40-50 PSI
26, 27.5, 29 Inch Bicycle Tires45-55 PSI
BallsBasketball7-9 PSI
Football8-10 PSI
Volleyball5-6 PSI
Table of recommended inflation pressures for various item types (bikes, balls).
Recommended pressure ranges for common inflatables.

6.6 Product Demonstration Video

Watch this video for a visual guide on how to use your CYCLAMI Z5L Electric Pump:

A short video demonstrating the features and usage of the CYCLAMI Z5L Electric Pump.

7. Maintenance

  • Cleaning: Wipe the exterior of the pump with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Storage: Store the pump and its accessories in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Battery Care: For long-term storage, charge the battery to about 50% every 3-6 months to prolong its lifespan.
  • Nozzle Inspection: Regularly check nozzles and hoses for wear or damage. Replace if necessary to ensure efficient inflation.

8. Troubleshooting

  • Pump not turning on: Ensure the battery is charged. If not, connect to a power source using the Type-C cable.
  • Pump not inflating: Check if the hose and nozzle are securely attached to both the pump and the item. Verify that the target pressure is set above the current pressure.
  • Inaccurate pressure reading: Ensure the nozzle is properly sealed to the valve. Calibrate the device if possible (refer to specific instructions if available, otherwise contact support).
  • Overheating: The pump has overheat protection. If it stops unexpectedly, allow it to cool down for at least 15-20 minutes before resuming use.
  • Display not working: Try restarting the device. If the issue persists after charging, contact customer support.

9. User Tips

  • Always fully charge the pump before a long trip or extended use to ensure maximum battery life.
  • Keep all adapters and nozzles organized in a small pouch to avoid losing them, especially the small balloon needle.
  • Familiarize yourself with the pressure requirements of your most frequently inflated items (e.g., bike tires, sports balls) to quickly set the correct target pressure.
  • The emergency light is useful not just for inflation in the dark, but also as a general utility light during roadside stops.

10. Warranty and Support

The CYCLAMI Z5L Electric Pump is designed for durability and performance. For any issues or questions not covered in this manual, please contact CYCLAMI customer support through your purchase platform or the official brand website. Please retain your proof of purchase for warranty claims.


CYCLAMI Z5L Portable Electric Air Pump Tire Inflator with Preset Modes and Emergency Light

CYCLAMI Z5L Portable Electric Air Pump Tire Inflator with Preset Modes and Emergency Light

0:26 • 1280×720 • promo

Related Documents - Z5L

Preview CYCLAMI Tire Inflator Operating Instructions
Comprehensive operating instructions for the CYCLAMI tire inflator, detailing setup, air tank inflation, nozzle conversion for Presta (FV) and Schrader (AV) valves, and the inflation process for bicycle tires.
Preview CYCLAMI AM6 Mini Electric Air Pump User Manual
User manual for the CYCLAMI AM6 Mini Electric Air Pump, a portable and rechargeable device for inflating tires. Includes specifications, operating instructions, charging details, and troubleshooting notes.
Preview CYCLAMI X7 Bicycle Light User Manual
CYCLAMI X7 Bicycle Light User Manual: A comprehensive guide to the 1000-lumen, USB rechargeable, waterproof smart headlight for road and mountain bikes. Learn about installation, operation, features, and maintenance.
Preview CYCLAMI A3 MAX Pump User Manual
Comprehensive user manual for the CYCLAMI A3 MAX portable electric tire inflator, covering setup, operation, maintenance, and troubleshooting for bicycles and cars.
Preview CYCLAMI AM6 Mini Air Pump User Manual
User manual for the CYCLAMI AM6 portable mini air pump, detailing specifications, features, operation, charging, and troubleshooting. Includes instructions for use, pressure settings, and contact information.
Preview CYCLAMI CYC1800 Bicycle Headlight: User Manual and Instructions
Comprehensive user manual for the CYCLAMI CYC1800 bicycle headlight, detailing operation modes, installation, charging, specifications, and safety precautions. Includes multilingual content.