1. Introduction
The Douk Audio ST-01PLUS is a versatile HiFi Bluetooth TPA3255 Digital Amplifier designed to enhance your audio experience. It features multiple input options including Bluetooth 5.2, RCA, and MM Phono, making it compatible with a wide range of audio devices such as turntables, phones, computers, and CD players. With its powerful TPA3255 amplifier chip, it delivers up to 300W per channel, driving most home passive speakers with exceptional sound quality. The integrated VU meter adds a unique retro aesthetic, providing a visual representation of audio levels. This manual provides detailed instructions for setting up, operating, and maintaining your ST-01PLUS amplifier.

2. Product Overview
2.1 Front Panel Controls and Indicators

- Power Switch / Input Switch / Volume Knob (MODE/VOLUME): This multi-function knob controls power on/off, selects input sources (BT, RCA, PHONO), and adjusts the main volume.
- Bluetooth Indicator (BT): Illuminates when Bluetooth input is selected and connected.
- RCA Indicator (RCA): Illuminates when RCA input is selected.
- Phono Indicator (PHONO): Illuminates when MM Phono input is selected.
- VU Meter: Displays real-time audio signal levels, dynamically decorating the audio system.
- Bass Knob (BASS + -): Adjusts the low-frequency output.
- Treble Knob (TREBLE + -): Adjusts the high-frequency output.
2.2 Rear Panel Connections

- Bluetooth Antenna Connector: For attaching the included Bluetooth antenna.
- Clear Bluetooth Records Button: Resets Bluetooth pairing history.
- RCA Audio Input (AUDIO INPUT R/L): For connecting audio sources via RCA cables.
- MM Phono Input (PHONO INPUT R/L): For connecting turntables with MM cartridges. Includes a ground terminal.
- Speaker Output (SPEAKER OUTPUT R/L): Banana speaker jacks for connecting passive speakers.
- 3.5mm AUX Output (AUX OUT): For connecting to another amplifier, active speakers, or an active subwoofer.
- DC Power Input (DC 24V-48V IN): For connecting the external power adapter.
3. Setup
3.1 Unpacking and Inspection
Carefully remove all components from the packaging. Inspect the amplifier and accessories for any signs of damage. If any damage is found, contact your retailer immediately.
3.2 Connecting Speakers
- Ensure the amplifier is turned off and unplugged from the power source.
- Connect your passive speakers to the "SPEAKER OUTPUT" banana jacks on the rear panel. Ensure correct polarity (red to red, black to black) for both left (L) and right (R) channels.

3.3 Connecting Audio Sources
- RCA Input: Connect your CD player, DAC, or other audio devices to the "AUDIO INPUT" RCA jacks using appropriate RCA cables.
- MM Phono Input: Connect your turntable to the "PHONO INPUT" RCA jacks. If your turntable has a ground wire, connect it to the ground terminal next to the phono inputs to reduce hum.
- Bluetooth Antenna: Screw the included Bluetooth antenna onto the connector on the rear panel.
3.4 Connecting Power
- The ST-01PLUS requires a DC 24-48V power adapter (not included with all versions). Ensure you use a high-quality power supply that meets these specifications.
- Connect the power adapter to the "DC 24V-48V IN" port on the rear panel.
- Plug the power adapter into a suitable wall outlet.

3.5 Optional AUX Output Connection
If you wish to connect an additional amplifier, active speakers, or an active subwoofer, use a 3.5mm audio cable to connect the "AUX OUT" port to the input of your external device.
4. Operation
4.1 Power On/Off and Input Selection
- Rotate the large "MODE/VOLUME" knob clockwise to turn on the amplifier.
- Press the "MODE/VOLUME" knob to cycle through the input sources: Bluetooth (BT), RCA, and Phono. The corresponding indicator light on the front panel will illuminate.
4.2 Volume Control
Rotate the large "MODE/VOLUME" knob to adjust the main volume level. Turn clockwise to increase volume, counter-clockwise to decrease.
4.3 Tone Control
- Bass Adjustment: Use the "BASS" knob to increase or decrease the low-frequency response.
- Treble Adjustment: Use the "TREBLE" knob to increase or decrease the high-frequency response.
4.4 Bluetooth Pairing
- Select "BT" input using the "MODE/VOLUME" knob. The Bluetooth indicator will flash, indicating it's in pairing mode.
- On your Bluetooth device (phone, tablet, etc.), search for "ST-01PLUS" in the Bluetooth settings and connect.
- Once connected, the Bluetooth indicator will glow steadily.
- To clear previous pairing records, press the "Clear Bluetooth records" button on the rear panel.
4.5 VU Meter Operation
The VU meter dynamically displays the audio signal level. The sensitivity of the VU meter can be adjusted to better match different input signals, ensuring accurate visual feedback. This adjustment is typically done via a small control on the unit, as indicated in the product images.

5. User Tips
- Synchronized Output: Note that the 3.5mm AUX output and the speaker jacks output are controlled by the main volume and bass/treble settings synchronously. Adjusting these controls will affect all active outputs.
- Power Supply Importance: For optimal performance and higher power output, consider using a high-quality power supply within the specified 24-48V DC range. The quality of the power supply can significantly impact sound clarity and maximum output.
- Bluetooth Reset: If you experience issues connecting a new Bluetooth device or if a previously paired device is not connecting, try using the "Clear Bluetooth records" button on the rear panel to reset the amplifier's Bluetooth memory.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the amplifier. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.
- Ventilation: Ensure the amplifier has adequate ventilation. Do not block the ventilation holes. Avoid placing the unit in enclosed spaces or on soft surfaces that may obstruct airflow.
- Environment: Keep the amplifier away from direct sunlight, heat sources, excessive dust, moisture, and strong electromagnetic fields.
- Power Off: Always turn off and unplug the amplifier from the power outlet before cleaning or if it will be unused for an extended period.
7. Troubleshooting
- No Power:
- Check if the power adapter is securely connected to both the amplifier and the wall outlet.
- Ensure the power outlet is functional.
- Verify that the power switch is in the "ON" position.
- No Sound:
- Confirm that the correct input source (BT, RCA, PHONO) is selected.
- Check all audio cable connections between the source device and the amplifier, and between the amplifier and speakers.
- Ensure the volume knob is turned up.
- Test with a different audio source or speakers to isolate the problem.
- Bluetooth Connection Issues:
- Make sure the amplifier is in Bluetooth pairing mode (BT indicator flashing).
- Ensure your Bluetooth device is within range and Bluetooth is enabled.
- Try clearing the Bluetooth records on the amplifier using the dedicated button on the rear panel, then attempt to pair again.
- Remove "ST-01PLUS" from your device's Bluetooth history and re-pair.
- Humming or Noise:
- Ensure all cables are securely connected.
- If using the Phono input, ensure the turntable's ground wire is connected to the amplifier's ground terminal.
- Try moving the amplifier or audio cables away from other electronic devices that might cause interference.
- Test with different cables or power outlets.
8. Specifications
8.1 General Parameters
| Audio Inputs | Bluetooth 5.2 / Stereo RCA / MM Phono |
| Audio Outputs | Banana Speaker Jacks / 3.5mm AUX |
| Max Output Power | 300W*2 (4Ω) |
| Input Sensitivity (Phono) | 5mV |
| Input Sensitivity (RCA) | 2V |
| Bass & Treble Adjustment Range | ±6dB |
| THD+N | 0.02%@1KHz |
| SNR | ≥107dB |
| Frequency Response | 20Hz-20KHz (±1dB) |
| AUX Rated Output Level | 2V |
| Working Voltage | DC 24-48V |
| Dimensions (W*D*H) | 115*100*60mm / 4.53*3.94*2.36in |
| Net Weight | 673g / 1.48lb |
| Package Weight (with 32V5A power supply) | 1.40kg / 3.09lb |
| Package Weight (with 48V5A power supply) | 1.60kg / 3.53lb |
8.2 Power Output Table
| Power Supply | Speaker Impedance | Rated Output Power |
|---|---|---|
| 32V/5A | 4Ω | 78W+78W |
| 6Ω | 71W+71W | |
| 8Ω | 65W+65W | |
| 36V/6A | 4Ω | 107W+107W |
| 6Ω | 100W+100W | |
| 8Ω | 94W+94W | |
| 48V/5A | 4Ω | 120W+120W |
| 6Ω | 110W+110W | |
| 8Ω | 102W+102W | |
| 48V/10A | 4Ω | 250W+250W |
| 6Ω | 210W+210W | |
| 8Ω | 185W+185W |

9. Warranty and Support
Douk Audio products are manufactured to high quality standards. For warranty information and technical support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for warranty claims.
9.1 Package Contents
- 1x ST-01 PLUS Amplifier
- 1x DC 32V/5A Power Adapter (optional, depending on purchase variant)
- 1x DC 48V/5A Power Adapter (optional, depending on purchase variant)
- 1x Bluetooth Antenna