Introduction
Thank you for choosing the Joyroom JR-ZS408 Magnetic Car Mount with 15W Wireless Charging. This device provides a secure and convenient way to hold and charge your smartphone while driving. Its robust magnetic hold, fast wireless charging capability, and flexible design ensure a safe and enjoyable experience on the road.
Specifications
| Attribute | Value |
|---|---|
| Type | Car Holder |
| Features | Magnetic |
| Compatible Brand | Apple iPhone (and other wireless charging compatible phones with metal ring) |
| Charger | Wireless Charger (15W Fast Charging) |
| Model Number | JR-ZS408 |
| Brand Name | Joyroom |
| Origin | Mainland China |
| Package Length | 10 cm |
| Package Width | 9 cm |
| Package Height | 4 cm |
| Package Weight | 0.224 kg |
Package Contents
Please check the package for the following items:
- Joyroom JR-ZS408 Magnetic Car Mount
- USB-C Charging Cable (may vary)
- Metal Ring (for non-MagSafe compatible phones)
- User Manual (this document)
Setup
1. Mount Installation
- Choose a Location: Select a flat, clean, and dry surface on your car's dashboard or windshield. The mount's large adhesive pad with an octopus-inspired design is suitable for both flat and slightly curved surfaces.
- Clean the Surface: Thoroughly clean the chosen area with an alcohol wipe and let it dry completely. This ensures optimal adhesion.
- Apply the Mount: Remove the protective film from the adhesive base of the car mount. Press the mount firmly onto the cleaned surface for at least 30 seconds. Allow the adhesive to cure for 24 hours before attaching your phone for maximum stability.


2. Phone Preparation for Magnetic Attachment & Wireless Charging
- For iPhone 12/13/14/15 Series or Magnetic Cases: These devices have built-in magnetic capabilities and do not require the additional metal ring. Simply attach your phone directly to the mount.
- For Other Wireless Charging Compatible Phones (e.g., Samsung, Google, LG, Moto): If your phone does not have built-in magnetic capabilities or you are not using a magnetic case, you will need to attach the provided metal ring to the back of your phone or phone case. Ensure the ring is centered over your phone's wireless charging coil for optimal performance.


Operating Instructions
1. Attaching Your Phone
Once the mount is securely installed and your phone is prepared (if a metal ring is needed), simply bring your phone close to the magnetic charging pad. The N55 strong magnets will automatically align and securely hold your phone in place.

2. Wireless Charging
Connect the provided USB-C charging cable to the car mount and plug the other end into a compatible car charger (not included). Once your phone is magnetically attached, 15W fast wireless charging will begin automatically. Ensure your car charger supports fast charging for optimal speed.

3. Adjusting the Viewing Angle
The Joyroom JR-ZS408 features a 360° flexible rotation base and a foldable design, allowing for fully adjustable viewing angles. You can rotate your phone horizontally or vertically and adjust the arm to your preferred position for optimal visibility and safety.


Maintenance
- Cleaning: Wipe the car mount and charging pad with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the surface or electronic components.
- Adhesive Care: If the adhesive pad loses its stickiness, gently rinse it with water and let it air dry. Do not use soap or detergents. This can often restore its adhesive properties.
- Storage: When not in use for extended periods, store the car mount in a cool, dry place away from direct sunlight.
Troubleshooting
- Phone not charging:
- Ensure the USB-C cable is securely connected to both the car mount and a working car charger.
- Verify that your car charger is providing sufficient power (a fast charging compatible charger is recommended for 15W output).
- Check if your phone is correctly aligned on the magnetic charging pad.
- If using a metal ring, ensure it is properly placed and not interfering with the wireless charging coil.
- Remove any thick phone cases that might impede wireless charging.
- Phone not holding securely:
- Ensure your phone or phone case has magnetic capabilities (for iPhone 12-15 series or magnetic cases) or that the metal ring is correctly attached and centered.
- Clean the magnetic surface of the mount and your phone/ring to remove any dust or debris.
- Avoid placing heavy objects on the mount that exceed its holding capacity.
- Mount not sticking to the dashboard:
- Ensure the dashboard surface was thoroughly cleaned and dry before installation.
- Allow the adhesive to cure for 24 hours after initial application before attaching your phone.
- If the adhesive has lost its stickiness, try rinsing it with water and air drying as described in the Maintenance section.
User Tips
- One-Handed Operation: The magnetic attachment allows for easy one-handed operation, providing more safety while driving as you can quickly mount or unmount your phone without distraction.
- Stability on Bumpy Roads: The strong N55 magnets and robust design ensure your phone remains securely in place, even when driving on bumpy roads or during sudden stops.
- Optimal Charging: For the fastest 15W wireless charging, use a car charger that supports Quick Charge (QC) 3.0 or Power Delivery (PD) standards.
Warranty and Support
Joyroom products are designed for reliability and performance. For any technical support, warranty claims, or inquiries regarding your JR-ZS408 Magnetic Car Mount, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase for warranty purposes.