1. Introduction
The MINIEYE C2L is an advanced 4K AI ADAS Dash Cam designed to enhance driving safety and record your journeys. This intelligent multi-function warning device provides real-time voice alerts for potential traffic safety risks and captures high-resolution video from both front and rear cameras.
Video: Overview of MINIEYE C2L features including 4K recording, ADAS, and night vision capabilities.
Product Highlights:
- 4K Ultra HD Dual Cameras: Front 2160P and Rear 1080P recording with 170° wide angle.
- ADAS AI Collision Avoidance Technology: Real-time voice alerts for Forward Collision Warning, Urban Forward Collision Warning, Headway Monitoring Warning, and Forward Vehicle Start Alert. (Note: ADAS function only supports recording resolution under 4K).
- Built-in WiFi & GPS: Connect to the MINIEYE APP (iOS/Android) for real-time preview, playback, download, editing, and sharing of videos, as well as tracking speed, location, and route. Supports OTA updates.
- Parking Monitor: Automatically monitors surroundings when parked. Requires MINIEYE Hardwire Kit (sold separately).
- Advanced Optics: F1.5 large aperture and 6-glass lens for clear low-light recording, WDR (Wide Dynamic Range) for balanced exposure.
- Voice Control: Control functions like taking pictures or turning off recording with voice commands.
For a detailed user manual in PDF format, please refer to the official document: User manual (PDF).
2. Product Components
Main Unit Overview:

Image: The MINIEYE C2L dash cam main unit shown alongside a smartphone displaying the companion app interface.
- Speaker: For audio output and voice alerts.
- Microphone: For audio recording.
- AV-IN Port: For connecting the rear camera.
- TF-Card Slot: For inserting the memory card.
- Type-C Port: For power connection.
- Bracket: For mounting the dash cam.
- Power Button: To control power.
- Camera: The main front camera lens.
Package Contents:

Image: Visual representation of the items included in the MINIEYE C2L package.
- The host (main unit) x1
- Rear Camera x1
- Rear Camera Cable x1
- Crowbar x1
- The instructions (User Manual) x1
- Power Cable x1
- Electrostatic Sticker x1
3. Installation Guide
For a visual installation guide, search "Spedal" on YouTube or scan the QR code provided in the manual (page 3 of PDF) to watch the installation video.
Step 1: Install the Electrostatic Sticker
- Clean your windshield thoroughly.
- Place the electrostatic sticker on the recommended area of the windshield, avoiding edges. Choose a flat and smooth area.
- Ensure all air bubbles are removed between the sticker and the glass.

Image: Diagram illustrating the optimal placement for the dash cam's electrostatic sticker on the windshield, typically behind the rearview mirror.
Step 2: Attach the Camera Mount
- Insert a TF card (Class 10, up to 128GB) into the TF-Card slot on the main unit.
- Remove the protective film from the 3M adhesive on the back of the bracket.
- Carefully paste the bracket onto the electrostatic sticker in the designated area. Press firmly to ensure secure attachment.
Step 3: Connect the Power Supply
- Run the power cord along the top of the windshield, down the A-pillar, and around the glove compartment to reach the cigarette lighter socket.
- Connect the power cable to the car charger, then plug the charger into the cigarette lighter socket.
- Connect the rear camera to the Rear camera cable, and insert the other end into the AV-IN port of the main unit.
- Paste the Rear Camera on the rear glass. Remember to remove the lens protective film.
Note: The location of the cigarette lighter socket may vary by vehicle. The provided figures are for reference only.
Step 4: Adjust Camera Angle
- Adjust the main unit by turning it up or down to ensure the camera faces forward horizontally, capturing the road effectively.
Once the car is started, the product will automatically power on, emit a prompt sound, and begin continuous video recording. Use the mobile APP for screen adjustment and personalized configuration.
Warm Tip: If you have purchased a parking monitoring cable separately, please refer to its specific installation guide.
4. Operating Instructions
4.1. Mobile APP Connection and Activation
The MINIEYE APP is essential for configuring and managing your dash cam. It supports both iOS and Android systems (Android 5.0/iOS 10 and above).

Image: The MINIEYE dash cam connected to a smartphone app, demonstrating features like real-time video preview, GPS tracking, and app control.
- Download the APP: Scan the QR code on page 2 of the PDF manual or search "MINIEYE International" in your device's App Store.
- Authorize Connection:
- Ensure the device is powered on.
- In the APP, navigate to the "Device" page and click the "+" button to add your MINIEYE AI Collision Avoidance Device.
- Select the Wi-Fi network named "MINIEYE-Device ID" (e.g., "MINIEYE-Device ID") from the list. The default password is
12345678. (The Device ID can be found at the bottom of the product package). - If prompted on Android, select "Continue" to use the wireless network.
- After connection, the device will request user authorization for APP-to-Device communication security. Click the button on the monitor or enter the voice verification code.
- APP Activation:
- Select Car Type: The width of your car model affects the AI anti-collision algorithm. Select your car type in the "anti-collision setting" for accurate collision risk prediction.
- Adjust Horizontal Distance: The horizontal distance between the camera and the windshield's central axis impacts the AI anti-collision algorithm's accuracy. Use the scale line in the manual for measurement.
- Real-time Image Preview: The APP provides a real-time image for adjustment preview. Follow the guidelines to confirm settings, and the anti-collision functions will activate.
- Complete Adjustment: For accurate adjustment, drive at over 30km/h on a horizontal road with clear lane lines for 3-5 minutes without changing lanes. The system will then complete its accurate adjustment.
Important Note: Avoid placing objects with strong reflection or white light (e.g., paper towels, decorations) on the dashboard, as they can interfere with the algorithm and affect performance.
4.2. Anti-Collision Functions Setting (ADAS)
Access "Anti-Collision Settings" via the "Device" page in the APP to configure various parameters.
- Forward Collision Warning (FCW) / Headway Monitoring Warning (HMW) / Urban Forward Collision Warning (UFCW): These functions ensure you maintain a safe distance from the vehicle ahead and warn you of potential collisions.
- Stop & Go: Reminds you when the front car starts moving in congested traffic.
- Emergent Collision Warning (ECW): Automatically starts recording when a collision is detected.
Warm Tip: To optimize your driving experience, you can refine vehicle model data, reset installation distance parameters, or re-adjust the image if the camera offset is too large.
4.3. Voice Command
Control your dash cam using simple voice commands. Examples include: "Take a picture", "Turn off the recording".
4.4. Video Preview, Playback & Share
After setting up anti-collision functions, the APP's "Device" home page allows you to:
- Preview the current real-time video feed.
- Playback videos recorded within the last 2 hours.
- Access the "Device Album" to view, download, and share all driving record videos.
Warm Tip: All saved files can be easily managed through the "Device Album" section of the app.
Note: Product functions may vary slightly due to version upgrades. The actual version installed on your device will prevail.
5. Maintenance and Care
- Cleaning: Keep both the windshield and the camera surface clean and dry to ensure clear vision for the camera and optimal anti-collision function performance. Do not touch or play with the camera lens.
- Memory Card: Always cut off the power supply before inserting or removing the memory card. Use high-quality Class 10 memory cards (up to 128GB) from reputable suppliers to prevent data loss or malfunction.
- Environmental Conditions: The normal operating temperature range is -20°C to 65°C. Avoid using the device outside this range. Do not touch the main unit in high-temperature environments to prevent burns.
- Avoid Modifications: Do not attempt to modify the product yourself. Use only standard components such as the car charger and power cables provided to ensure proper functioning and prevent damage, explosion, or fire.
- Battery Check: If the device's battery shows signs of deformation, expansion, or leakage, discontinue use immediately.
6. Troubleshooting
| Fault | Solution |
|---|---|
| TF card full | Format the TF card through the APP. |
| TF card error | 1. Format the TF card through the APP. 2. Use a new genuine TF card. |
| TF card not recognized | 1. Format the TF card through the APP. 2. Use a new genuine TF card. |
| Can not boot | 1. Check the power supply is connected. 2. Boot test without inserting TF card. |
| Crash | 1. Remove the TF card and test to rule out the crash caused by the TF card. 2. Unplug the power cord to force restart the machine. |
7. Specifications
| Project | Specifications |
|---|---|
| Size | 110mm x 40mm x 27mm |
| Material | PC plastic, PC+ABS plastic, Aluminum alloy |
| Operating Temp. | -20°C ~ 65°C |
| Storage Temp. | -30°C ~ 75°C |
| Working Input | 12V / 1A |
| Rear Camera | Yes |
| Camera Resolution | 3840x2160 (4K) |
| Pixels | 800Mega |
| View Angle | 170° |
| Number Of Lenses | 2 |
| Video Code | H.265 |
| Special Features | G-Sensor, Built-in GPS, Real Time Surveillance, Wide Dynamic Range, WiFi Function |
| Max External Memory | 128G |
| Memory Card Required Reading Speed | Class 10 |
| OSD Language | Chinese (Simplified), English, Japanese |
| GPS logger | Internal |
| Assembly Mode | Portable Recorder |
| Chipset Manufacturer | MSTAR |
| Frames Per Second | 30 |
| Item Type | Car DVR |
| Certification | CE, FCC |
| Interface | USB 2.0 |
| Battery | None (Super Capacitor) |
| Touch Screen | No |
| Is Batteries Included | No |
8. User Tips
- ADAS Functionality: Ensure ADAS functions are properly activated and calibrated through the mobile app. This includes selecting your car type and driving for 3-5 minutes on a clear road for accurate adjustment. Remember, ADAS functions only support recording resolutions under 4K.
- Parking Monitoring: For parking mode functionality, the MINIEYE Hardwire Kit is required and sold separately. Refer to its specific installation guide.
- Video Management: All recorded videos and images can be viewed, downloaded, and shared directly from the "Device Album" section within the MINIEYE mobile app.
- Optimal Performance: To ensure the best performance of anti-collision features, keep your windshield and camera lens clean. Avoid placing reflective or bright objects on the dashboard that could interfere with the camera's vision.
- Software Updates: Keep your device's firmware updated via OTA (Over-the-Air) updates through the app to benefit from the latest features and improvements.
9. Safety Notice
Before using the MINIEYE Intelligent Multi-Function Warning Device, please read the following safety notices carefully and take appropriate safety precautions. By installing and using this device, you acknowledge and agree to these conditions.
- Driving Responsibility: The MINIEYE device is an advanced driving assistance system (ADAS) providing warnings for potentially dangerous situations. It is NOT an automatic driving system and does not replace the driver's responsibility to control the vehicle. Drivers must remain alert, obey traffic laws, and ensure driving safety at all times. Even when interacting with the monitor or app, full attention must be on driving.
- Algorithm Limitations: The device uses advanced computer vision and deep-learning technology, but complete and accurate identification of all vehicles, pedestrians, lane lines, or other traffic elements cannot be guaranteed. It may not always provide complete and accurate visual or sound warnings.
- Environmental Factors: External factors such as stains, oil, water, dust, or fingerprints on the windshield and camera can impair anti-collision functions. Keep these surfaces clean and dry.
- Dashboard Reflections: Self-luminous, strongly reflective, or high-brightness objects (e.g., white paper, plastic bags, metal/ceramic/glass products) on the dashboard may reflect onto the windshield, interfering with camera vision and anti-collision functions.
- Weather Conditions: Adverse weather (rain, snow, fog, haze, dust, typhoon, tornado, extreme cold/hot) can cause anti-collision functions to fail.
- Lighting Conditions: Poor lighting (backlighting, tunnels, culverts, forests) or strong light (high beam, spotlight, laser, flame, explosion) can affect anti-collision functions.
- Road Conditions: Poor road conditions, non-standard or worn lane markings, soil/snow/foreign objects covering lane signs can affect the intelligent adjustment and lane departure warning.
- Vehicle Identification: Some special vehicle types (military, ancient, exotic, special engineering vehicles, trailers with special shaped items) may not be accurately identified.
- Pedestrian Identification: People with special postures or clothing (low-visibility, camouflage, squatting, dancing, riding horses) may not be accurately identified.
- Unknown Objects: Sudden appearance of unknown objects (balloons, drones, flying toys, balls, high-altitude debris) may temporarily cause anti-collision function failure.
- Software Updates: Functional failure rates for special scenes will decrease with algorithm upgrades. Refer to actual experience.
- FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to not causing harmful interference and accepting any interference received.
- Modifications: Unauthorized changes or modifications to this unit will void the user's authority to operate the equipment.
- Interference: If this equipment causes harmful interference to radio or television reception, try reorienting the receiving antenna, increasing separation, connecting to a different circuit, or consulting a technician.
- RF Exposure: This equipment complies with FCC RF radiation exposure limits for an uncontrolled environment and should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
10. Warranty and Support
For product information and videos, please visit:
- MINIEYE Official Website: https://www.minieye.cc
- Spedal Official Website: https://www.spedal.cc
- For product videos, search "Spedal" on YouTube.
For any questions or support, please contact: support@spedaltech.com
This manual is for reference only. Specific functions and product pictures may slightly differ from the actual ones. Please refer to the actual product.