1. Introduction
This manual provides instructions for the safe and efficient use of your DinoFire PS5 Controller Charging Station. Please read this manual thoroughly before use and retain it for future reference.
Product Overview
The DinoFire PS5 Controller Charging Station is designed to charge two PlayStation 5 DualSense or Edge controllers simultaneously. It features adjustable RGB lighting and incorporates smart chip technology for safe and efficient charging.
Figure 1: DinoFire PS5 Controller Charging Station with two controllers.
2. Specifications
| Feature | Description |
|---|---|
| Brand Name | DinoFire |
| Model Number | FC400-AE |
| Compatible Brand/Model | PlayStation 5 (DualSense & Edge Controllers) |
| Power Source | DC |
| Charging Time | Approximately 2.5 - 3 hours for two controllers |
| RGB Lighting | Adjustable LED modes (Flash, Breathing, Solid Blue, Off) |
| Safety Features | Over-Voltage Protection, Over-Current Protection, Short-Circuit Protection, Over-Charged Protection |
| Cable Type | USB Type-C (80 cm cable included) |
| Power Input Options | PS5 Console USB port or 5V-2A Adapter (not included) |
| Dimensions (approx.) | Length: 17 cm, Width: 7 cm, Height: 7 cm |
| Weight (approx.) | 0.149 kg |
3. Setup Instructions
Unpacking:
Carefully remove the charging station and any accessories from the packaging. Ensure all components are present: the charging station and the 80 cm USB Type-C cable.
Power Connection:
Connect the supplied 80 cm USB Type-C cable to the charging station. You have two options for power supply:
- Via PS5 Console: Plug the other end of the USB Type-C cable into an available USB port on your PlayStation 5 console.
Figure 2: Powering the charging station via PS5 console.
- Via 5V-2A Adapter: Plug the other end of the USB Type-C cable into a 5V-2A wall adapter (not included).
Figure 3: Powering the charging station via a wall adapter.
- Via PS5 Console: Plug the other end of the USB Type-C cable into an available USB port on your PlayStation 5 console.
Placement:
Place the charging station on a stable, flat surface near your PlayStation 5 console or power outlet.
4. Operating Instructions
Charging Controllers:
Align your PlayStation 5 DualSense or Edge controllers with the charging ports on the station and gently place them into position. The controllers will begin charging automatically.
Figure 4: Controllers correctly placed on the charging station.
Charging Indicators:
The charging station features LED indicators to show the charging status:
- Red Light: Controller is charging.
- Green Light: Controller is fully charged. The light will turn off after 10 minutes of being fully charged.
Figure 5: Visual representation of charging status indicators.
Adjusting RGB Lights:
The charging station features adjustable RGB lighting. Use the dedicated RGB switch (refer to product images for button location) to cycle through different LED modes:
- Flash Light Mode
- Breathing Light Mode
- Solid Blue Color Mode
- Off Mode
Figure 6: RGB lighting modes demonstration.
Video Demonstration:
Video 1: Product features and operation demonstration.
5. Maintenance
- Keep the charging station clean and free from dust. Use a soft, dry cloth to wipe the surface.
- Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
- Do not attempt to disassemble or repair the charging station yourself. This may void the warranty and cause damage.
- Ensure the charging ports are free from debris before inserting controllers.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Controllers not charging |
|
|
| Charging is slow |
|
|
| RGB lights not working |
|
|
7. Warranty and Support
For warranty information and technical support, please contact DinoFire customer service through your purchase platform or visit the official DinoFire website. Keep your purchase receipt as proof of purchase.
