Welcome
Dear Valued Customer,
Thank you for choosing AdoreTrip. We sincerely appreciate your trust and are honored to support you with a product designed to perform when it matters most.
At AdoreTrip, we believe reliable automotive equipment should provide confidence—not complexity. Unexpected situations such as a dead battery or low tire pressure can disrupt any journey, and in those moments, having dependable tools makes all the difference. This is why our Car Jump Starter with Air Compressor is engineered with a focus on safety, durability, and intuitive operation.
From component selection to final testing, every detail is carefully considered to ensure consistent performance and long-term reliability. Our goal is not only to meet technical standards, but to earn your confidence every time you use our product. Whether it's for daily driving, long road trips, or emergency preparedness, AdoreTrip is designed to be a solution you can rely on.
Your experience matters to us. Should you ever need assistance or have feedback to share, our customer support team is always ready to help. Your trust inspires us to continue improving and innovating.
Thank you for being part of the AdoreTrip community. Go wild but safe! We wish you safe travels and peace of mind on every journey.
Warm regards,
The AdoreTrip Team
Package Contents
Please ensure all items are present and in good condition:
- AdoreTrip Jump Starter with Air Compressor Unit
- Battery Clamps Cable
- USB-A Charging Cable
- Extension Air Hose
- User Manual (this document)
- Interchangeable Nozzles (needle nozzle for sports balls, short cone nozzle and long cone nozzle for inflatables, and a metal nozzle for bicycle tires)
Product Overview & Controls
Familiarize yourself with the device's components and controls:
| No. | Description | No. | Description |
|---|---|---|---|
| 1 | Power On / Off Button | 10 | USB-C Input Port: 18W (5V/3A, 9V/2A) |
| 2 | Mode Button (M): Short press to switch between 5 modes; Long press to switch between 3 units. | 11 | USB-A Output Port: 5V / 2.4A |
| 3 | Increase Button (+): Short press for slow increase, long press for fast increase. | 12 | LED Light |
| 4 | Decrease Button (-): If the first attempt to start is unsuccessful, simply press this button to restart. There is no need to repeatedly connect and disconnect the clamps. | 13 | 12V Jump Start Power Port |
| 5 | LED Light Button: Press to cycle through Steady On, Strobe, SOS, and OFF modes. | 14 | Air Outlet |
| 6 | Force Start button: Long press for 3 seconds to turn on. | 15 | Handle |
| 7 | LED Function Display | 16 | Air Inlet |
| 8 | DC 12V 10A Output Port | 17 | Air Tube Outlet |
| 9 | USB-C Output Port: 5V / 3.1A (15.5W Max) | 18 | Anti-Slip Mat |
LED Display & Status Indicators
Understand the various indicators on the LED display:
| No. | Meaning | Recommended Action |
|---|---|---|
| 1 | Battery Level | Press "M" to switch to air compressor mode |
| 2 | Pressure Unit (PSI / BAR / KPA) | Press and hold "M" to change units |
| 3 | Fast Charge Indicator | Lights up when input power exceeds 6W |
| 4 | Start Inhibited | Check connection before starting |
| 5 | High Temperature Protection | Allow to cool naturally |
| 6 | Low Temperature Protection | Allow to warm up indoors |
| 7 | Short Circuit / Dead Battery | Check clamps. Use Force Start if necessary. |
| 8 | Reverse Polarity | Disconnect and reconnect correctly |
| 9 | Inflation Mode Icon | Press "M" to select the matching mode |
| 10 | Force Start Active | Refer to instructions before use |
| 11 | Target Pressure Value | Press "+" or "-" to adjust desired pressure |
| 12 | 12V Ready | Start the engine |
| 13 | Safety Protection Disabled (Force Start Mode) | Use only when necessary. Ensure correct connection |
*Actual status indications are for reference only. Always follow safety instructions before operation.
Important Safety Warnings
- For adult use only. Keep out of reach of children.
- Keep children at a safe distance while the device is operating or inflating.
- This product contains a built-in lithium battery. Do not expose to fire, high temperatures, or prolonged direct sunlight.
- Operating temperature: -4°F to 122°F (-20°C to 50°C).
- Use the product only in a clean, dry environment. Do not rinse or submerge in water.
- Do not disassemble, modify, or attempt to repair this product. Doing so will void the warranty and may cause injury or damage.
Force Start Mode (Emergency Use Only) Warnings:
- Force Start mode disables certain automatic safety protections.
- Use Force Start ONLY when the vehicle battery is completely discharged and standard jump-start mode fails.
- Always confirm correct battery clamp polarity before activation.
- Do NOT use Force Start mode if the battery shows signs of damage, leakage, or swelling.
- Incorrect use may result in battery explosion, fire, serious injury, or damage to the vehicle.
Hazardous Substance Information (RoHS Compliance)
| Name of parts | Pb | Hg | Cd | Cr (VI) | PBB | PBDE |
|---|---|---|---|---|---|---|
| Shell | O | O | O | O | O | O |
| Battery Cell | O | O | O | O | O | O |
| PCBA | X | O | O | O | O | O |
| Inflation Needle | X | O | O | O | O | O |
This table is prepared in accordance with the RoHS Directive.
- O: Indicates that the content of the restricted substance in all homogeneous materials of the part is below the limit specified in IEC 62321.
- X: Indicates that the content of the restricted substance in at least one homogeneous material of the part exceeds the limit specified in IEC 62321.
Setup and Charging
Before first use, ensure the device is fully charged. The unit features Two-Way Fast Charge capability.
- Connect the USB-C Charging Cable to the USB-C Input Port (10) on the device and to a compatible USB charger (18W or higher recommended for fast charging).
- The battery level indicator on the LED display (1) will show charging progress.
- A full charge can take as little as 4 hours with an 18W fast charger.
- For long-term storage, recharge the battery every 3-4 months to maintain battery health.
Operating Instructions
1. Jump Starting a Vehicle (Standard Mode)
This mode is for vehicles with a partially discharged battery.
- Press and hold the Power On/Off button (1) for approximately 1.5 seconds to turn on the device.
- Connect the jumper cable to the 12V Jump Start Power Port (13) on the unit.
- Attach the clamps to the vehicle battery:
- Red clamp to the Positive (+) terminal.
- Black clamp to the Negative (-) terminal.
- Confirm the LED display shows "12V READY".
- Start the vehicle within 60 seconds.
- After the engine starts, remove the clamps from the battery, then disconnect the cable from the device.
2. Jump Starting a Vehicle (Force Start Mode)
WARNING: Use Force Start mode ONLY when the vehicle battery is completely discharged and standard jump-start mode fails. This mode disables certain automatic safety protections. Always confirm correct battery clamp polarity before activation. Do NOT use Force Start mode if the battery shows signs of damage, leakage, or swelling.
- Connect the jumper cable to the 12V Jump Start Power Port (13) on the unit.
- Attach the clamps to the vehicle battery (Red to Positive, Black to Negative).
- If the display shows "SHORT CIRCUIT OR BATTERY DEAD", long press the "Force Start" button (6) for 3 seconds to activate Force Start mode.
- The display will show "FORCE START".
- Start the vehicle immediately.
- After the engine starts, remove the clamps from the battery, then disconnect the cable from the device.
3. Air Compressor Operation
The unit can inflate tires and other items up to 300 PSI.
- Power on the device by pressing and holding the Power On/Off button (1) for 1.5 seconds.
- Press the "M" button (2) to enter inflation mode.
- Securely attach the air hose to the tire valve.
- Short-press the "M" button (2) to select the desired inflation mode (e.g., Car, Motorcycle, Bicycle, Basketball, Free Mode). Long-press "M" to switch between PSI / BAR / KPA units.
- Use the "+" (3) or "-" (4) buttons to set the desired pressure.
- Press the Power On/Off button (1) to start inflation.
- The device will automatically stop once the preset pressure is reached.
Notes for Air Compressor:
- Allow the device to cool down between attempts if necessary.
- The display will automatically turn off after 3 minutes of inactivity.
- Pressure accuracy: ±1 PSI.
- If the built-in air hose is not long enough, use the supplied extension hose.
- The unit includes four interchangeable nozzles: a needle nozzle for sports balls, a short cone nozzle and a long cone nozzle for inflatables, and a metal nozzle for bicycle tires.
4. LED Work Light Operation
The integrated LED light provides illumination for various situations.
- Press the LED Light Button (5) to turn on the unit.
- Press the LED Light Button (5) repeatedly to cycle through the light modes: Steady On, Strobe, SOS, and Off.
5. Portable Power Bank Functionality
The device can also serve as a power bank for charging electronic devices.
- Connect your device's charging cable to the USB-A Output Port (11) or USB-C Output Port (9) on the jump starter.
- The jump starter will begin charging your device.
- The battery level indicator (1) will show the remaining power.
Maintenance & Storage
- Store in a cool, dry place away from direct sunlight.
- Do not leave the device outdoors when not in use.
- For long-term storage, recharge the battery every 3-4 months.
- Clean with a soft, dry cloth only.
- Inspect cables and connectors before each use.
Troubleshooting (FAQs)
- Q: Why won't the jump starter start my vehicle? What should I do if the vehicle still won't start?
- A:
- Check the battery level of the jump starter and recharge if necessary.
- Turn off all vehicle electrical loads (headlights, air conditioning, radio, etc.).
- Wait at least 10 seconds between starting attempts.
- If the battery level is above 50%, try 2-3 additional attempts.
- If the vehicle still does not start, the battery may be deeply discharged or undetectable. In this case, Force Start mode may be used.
- Q: The jump starter is powered on, but nothing happens. Why?
- A: The device may be in protection mode. Press the Power button again to retry.
- Q: Why does the device stop after one start attempt?
- A: Output is limited for safety protection. Press the Power button again before retrying.
- Q: Why does the "12V READY" indicator turn off quickly?
- A: Vehicle electrical loads may cause voltage drop. Turn them off and retry.
- Q: Is the jump starter safe to use?
- A: Yes. The device includes multiple built-in safety protections. Always follow the instructions in this manual.
- Q: Why do I hear a clicking sound in Force Start mode?
- A: This sound indicates that Force Start mode is active and operating normally.
- Q: Why does the device shut down during or after starting?
- A: Battery power may be insufficient. Recharge above 50% before retrying.
- Q: Can repeated starting attempts damage the device?
- A: The device limits output to protect itself. Do not exceed five attempts.
- Q: Why does charging slow down near full battery?
- A: The device switches to trickle charging to protect battery life and safety.
- Q: How long does it take to fully recharge the jump starter?
- A:
- Charging time depends on the charger used.
- For best results, use a PD / QC-compatible charger (18W or higher).
- When using an 18W fast charger, the jump starter can be fully charged in as little as 4 hours.
- Q: How often should I recharge the device when not in use?
- A: Recharge at least once every 6 months to maintain battery health.
- Q: What vehicles is this jump starter compatible with?
- A: Suitable for most 12V gasoline vehicles, including sedans, SUVs, and light trucks.
- Q: Can I use this device for boats or lawn mowers?
- A: Yes, as long as the equipment uses a 12V battery system.
- Q: Can I carry this jump starter on an airplane?
- A: Airline regulations vary. Please consult your airline before traveling.
User Tips
- For optimal performance and longevity, always ensure the device is charged above 50% before attempting to jump-start a vehicle.
- When using the air compressor, remember to select the correct inflation mode for your item (Car, Motorcycle, Bicycle, Basketball, or Free Mode) to ensure accurate pressure settings.
- In extreme cold, allow the unit to warm up indoors slightly before use to ensure proper function.
Specifications
| Parameter | Specification |
|---|---|
| Product Name | Jump Starter With Air Compressor |
| Model | CS02-8000A |
| Brand Name | AdoreTrip |
| Battery Capacity | 3.7V 26000mAH (20000-30000 mAh) |
| Number Of Built-in Batteries | 4 |
| Peak Current | 8000A (>1200 A) |
| Starting Current | 2000A |
| Gas Engines Compatibility | Up to 14L |
| Diesel Engines Compatibility | Up to 12L |
| Starts Per Charge | 42 times (up to 90 starts per charge from images) |
| Charging Time | 2.5h-3h (with 18W fast charger) |
| Charging Temperature | 0-45 °C (32-113 °F) |
| Operating Temperature | -20-60 °C (-4-140 °F) |
| Storage Temperature | -20-50 °C (-4-122 °F) |
| Display Screen Size | 4.7 inches |
| Rated Voltage | 14.5 V |
| Maximum Current Consumption | 12A |
| Motor Rated Power | 145W |
| Air Compressor Pump | Maximum Air Pressure 300PSI |
| Air Flow | 45L/Min |
| Inflation Units and Modes | Units: PSI, BAR, KPA. Free mode: 3-60 PSI (0.2-4.1 BAR / 20-410 KPA). Car mode: 26-60 PSI (1.8-4.1 BAR / 180-410 KPA). Motorcycle mode: 26-43 PSI (1.8-3.0 BAR / 180-300 KPA). Bicycle mode: 30-150 PSI (2.1-10.3 BAR / 210-995 KPA). Basketball mode: 4-16 PSI (0.3-1.1 BAR / 30-110 KPA). |
| DC Output | 12V-16V/10A |
| Type-C In Output | 12V 1.5A, 9V 2A, 5V 3A |
| USB Output | 12V 1.5A, 9V 2A, 5V 3A |
| Special Features | USB, Lighting, warning light, SOS Lighting, Two-Way Fast Charge |
| Dimensions | 240 x 173 x 85 mm (9.45 x 6.81 x 3.35 in) |
| Item Weight | 1.5 kg (3.09 lb) (Note: Product properties also list 3KG) |
| External Testing Certification | ROHS, FCC, CE, MSDS |
*Actual performance may vary depending on vehicle condition, battery health, and ambient temperature.
Warranty & Support
The manufacturer assumes no liability for damage or injury resulting from misuse, improper installation, or unauthorized modification of this product.
If you have any questions or need further assistance, please contact AdoreTrip customer support:
- Email: support@adoretrip.com
- Website: www.adoretrip.com
Important Notes:
- If you continue to experience issues, discontinue use and contact customer support.
- Improper use may result in damage, injury, or voided warranty.
- The manufacturer assumes no liability for damage caused by misuse, improper installation, or unauthorized modification.