Introduction
The COMICA Ejoy Uni Pro is a versatile condenser USB microphone designed for high-quality audio capture in various scenarios, including streaming, recording, podcasting, and gaming. It features both wired and 2.4GHz wireless connectivity, a built-in sound card, dynamic RGB lighting, and essential audio controls like gain adjustment, real-time monitoring, one-key denoise, and muting. This manual provides detailed instructions for setting up, operating, and maintaining your Ejoy Uni Pro microphone.
What's in the Box?
The COMICA Ejoy Uni Pro package includes the following components:
- Microphone (TX)
- Receiver (RX)
- Pop Filter
- USB C-USB C/USB A 2-in-1 Audio Cable
- Desktop Mic Stand (for Uni Pro D version)
- Boom Arm (for Uni Pro A version)
- User Manual
- Warranty Card
- Hook and Loop Fastener
Setup
1. Physical Assembly
- **Attach Pop Filter**: Secure the pop filter to the microphone to reduce plosive sounds.
- **Mount Microphone**:
- **Desktop Stand (Uni Pro D)**: Attach the microphone to the provided desktop stand. Ensure the stand is placed on a stable, flat surface.
- **Boom Arm (Uni Pro A)**: If you have the Uni Pro A version, attach the microphone to the adjustable boom arm. Adjust the arm's angles to suit your recording position. The boom arm is designed to support up to 1.5kg.
2. Connecting to Devices
The Ejoy Uni Pro supports both wired and wireless connections, offering broad compatibility.
- **Wired Connection (USB-C Digital Output)**:
- Connect the microphone directly to your computer (Windows, MacOS), smartphone (USB Type-C, iPhone 15 with appropriate adapter), or gaming console (PS4/PS5) using the provided USB C-USB C/USB A 2-in-1 audio cable.
- No additional drivers are required due to the built-in sound card.
- **Wireless Connection (2.4GHz Wireless Mode)**:
- Plug the Receiver (RX) into your device's USB-C port.
- The microphone (TX) has a built-in wireless RF module. Ensure both the microphone and receiver are powered on.
- The wireless transmission distance is up to 20 meters.
- Note: If the mic fails to pair with the receiver, switch off the mic and then refer to the pairing steps (usually involves holding a button on both units) to pair again.
3. Software Configuration (for Computers)
- **Windows/MacOS**:
- Go to your computer's sound settings.
- For wired connection, select "Comica_EJoy Uni Pro TX" as the output and input device.
- For wireless connection, select "Comica_EJoy Uni Pro RX" as the output and input device.
Operating Instructions
1. Power On/Off and Pairing
- Locate the power switch on the microphone. Press and hold to power on or off.
- For wireless mode, ensure both the microphone (TX) and receiver (RX) are powered on. They should automatically pair. If not, refer to the pairing instructions in the full user manual (not provided here, but generally involves a specific button press sequence).
2. Gain Control
- Adjust the mic gain knob located on the microphone body to control the input volume.
- If the input sound is too loud when connected to a computer, you can also adjust the computer's "Microphone Properties - Level" to reduce the gain (e.g., in Windows settings).
3. Real-Time Monitoring
- Plug your headphones into the 3.5mm TRS/TRRS monitoring port on the microphone to listen to your audio in real-time. This helps in adjusting levels and ensuring clear sound capture.
4. One-Key Denoise
- Press the dedicated denoise button to activate or deactivate noise reduction. This feature helps to minimize background noise for clearer recordings.
5. One-Key Muting
- Use the touchable muting key to quickly mute or unmute the microphone. This is useful for preventing unwanted sounds from being picked up during live sessions or recordings.
6. RGB Lighting Effects
- The microphone features dynamic RGB lighting with three unique effects: Breathing Light, Dynamic Gradient, and Audio Dynamics.
- These effects can be switched freely to match your desired style and atmosphere.
Maintenance
- **Cleaning**: Use a soft, dry cloth to clean the microphone. Do not use harsh chemicals or abrasive materials.
- **Storage**: Store the product in a dry environment. Avoid extreme temperatures and humidity.
- **Handling**: This product is a high-precision instrument; avoid dropping, colliding, or pounding it.
- **Environmental Conditions**: Do not use the equipment in rain or in a damp environment to avoid short-circuit danger.
- **Heat Sources**: Do not use this equipment in the vicinity of a heat source or interference source, such as a radiator, oven, refrigerator, or air conditioner.
Troubleshooting
- **No Sound Output/Input**:
- Ensure the microphone is properly connected (wired or wireless).
- Check your device's sound settings to confirm "Comica_EJoy Uni Pro TX" (wired) or "Comica_EJoy Uni Pro RX" (wireless) is selected as the input/output device.
- Verify the microphone's gain knob is adjusted appropriately.
- Ensure the microphone is not muted.
- **Wireless Pairing Issues**:
- If the mic fails to pair with the receiver, switch off the mic and then power it on again to re-initiate pairing.
- Ensure both units are within the 20-meter wireless range.
- **Excessive Noise/Distortion**:
- Activate the one-key denoise feature.
- Adjust the mic gain knob to a lower setting.
- If connected to a computer, reduce the gain in the computer's sound settings ("Microphone Properties - Level").
- Ensure the pop filter is correctly installed to reduce plosives and air flow noise.
Specifications
| Attribute | Value |
|---|---|
| Transmitting Power | +10dBm |
| Reception Sensitivity | -97dBm |
| Antenna Type | Ceramic Antenna |
| Wireless Delay | <20ms |
| Directivity | Cardioid |
| Microphone Sensitivity | -35dB±2dB |
| Frequency Range | 20Hz ~ 20kHz |
| Maximum SPL | 105dB (@ 1% THD) |
| Signal / Noise | 72dB SPL(A-weighted, as per IEC651) |
| Equivalent Noise | 22dB SPL(A-weighted, as per IEC651) |
| Dynamic Range | 83dB SPL(A-weighted, as per IEC651) |
| Sampling Rate | 48kHz |
| Bit Depth | Microphone Recording: 24-bit; Headphone Monitoring: 16-bit |
| Output Interface | USB-C |
| Monitoring Port | 3.5mm TRS/TRRS |
| Battery Type | Lithium Polymer 1000mAh 3.7V |
| Charging Time | 1.5 hours |
| Standby Time | RGB off: 50 hours; RGB on: 20 hours |
| Net Weight | Microphone Body: 140g; RX: 2.6g |
| Dimension | Microphone Body: Φ64.5 x L154.2mm; RX: 15.5 x 7.0 x 25.7mm |
| Operating Temperature | 0℃ ~ +50℃ |
| Storage Temperature | -20℃ ~ +60℃ |
Certifications
User Tips
- **Optimal Sound**: Always aim the front of the microphone directly at the sound source for the best recording quality.
- **Accessory Differences**: Be aware that the Ejoy Uni Pro comes in different versions (e.g., Uni Pro A with a boom arm, Uni Pro D with a desktop stand). Ensure you have the accessories that match your specific needs.
- **Gain Management**: If you experience overly loud input, remember to adjust both the physical gain knob on the microphone and the software gain settings on your computer.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the Warranty Card included in your product package or contact COMICA customer service directly. Keep your purchase receipt and warranty card for future reference.
