1. Introduction
The Miboxer B3 2.4GHz Smart 4-Zone Touch Panel Remote Control is a sophisticated and user-friendly device designed for controlling RGB/RGBW LED lighting systems. Featuring a delicate and fashionable tempered glass panel and a high-precision capacitive touch screen, it offers stable and convenient long-distance wireless control. This remote supports 16 million colors, brightness adjustment, and color temperature control, allowing you to create various lighting atmospheres.
This manual provides detailed instructions for the B3 model, which is part of the B series and is powered by AAA batteries. It is compatible with MiBoxer/Mi-Light 2.4G series products.
2. Product Features
- Advanced Control: 4-zone individual control for countless lamps or controllers.
- Color Options: 16 million colors and 9 dynamic color changing modes.
- Brightness & Color Temperature: Adjustable brightness (1-100%) and color temperature.
- Wireless Technology: 2.4GHz RF wireless transmission technology with a control distance of 30m (barrier-free space).
- Design: High-end tempered glass panel, scratch-resistant, and sensitive touch screen.
- Installation: Magnetic installation for B series, no wiring required, moveable and easy to operate.
- Power Source: Powered by 2x AAA batteries.
- Compatibility: Supports MiBoxer/Mi-Light 2.4G series products.


3. Specifications
| Parameter | Value |
|---|---|
| Product Name | 4-Zone Panel Remote (RGBW) |
| Model No. | B3 (White), B3-B (Black) |
| Working Voltage | 3V (AAA * 2PCS) |
| Standby Power Consumption | 20µA |
| Transmitting Power | 6dBm |
| RF | 2.4GHz |
| Control Distance | 30m (Barrier-free space) |
| Transmission Frequency | 2400-2483.5MHz |
| Modulation Method | GFSK |
| Working Temperature | -10~40°C |
| Material | ABS |
| Panel Size | 86mm x 86mm x 16mm |


4. Setup
4.1 Battery Installation
The B series panel remote is powered by 2x AAA batteries. Open the battery compartment on the back of the panel and insert the batteries, ensuring correct polarity.

4.2 Physical Installation
The B series remote features magnetic installation, allowing for free placement without wiring. Simply attach the remote to a metallic surface or use double-sided adhesive for other surfaces.

4.3 Linking and Unlinking Lights
This remote allows you to link and unlink individual zones or all lights to the controller.

Linking:
- First, power off the light(s) you wish to link.
- Then, power on the light(s).
- Within 3 seconds of powering on, touch any of the Zone ' | ' buttons (1, 2, 3, or 4) three times shortly.
- The link is successful when the light blinks 3 times. If not, try again later.
Unlinking:
- First, power off the linked light(s).
- Then, power on the light(s).
- Within 3 seconds of powering on, long press the linked Zone ' | ' button or the Master ' | ' button (ALL) five times shortly.
- The unlink is successful when the light blinks 10 times with red color. If not, try again later.
5. Operating Instructions
5.1 Button Functions Overview

- Color Slider: Touch to select desired color from 16 million options.
- Dimming Slider: Touch to adjust brightness from 1% to 100%.
- White Button: Switches to static white light mode.
- Mode Button: Cycles through 9 different color changing modes.
- Speed- Button: Slows down the speed of the current dynamic mode.
- Speed+ Button: Accelerates the speed of the current dynamic mode.
- ALL ON/OFF Buttons: Turns all linked lights ON or OFF.
- Zone 1-4 ON/OFF Buttons: Turns lights linked to specific zones (1-4) ON or OFF.
5.2 General Operation
- Power On/Off: Use the 'ALL ON' or 'ALL OFF' buttons to control all linked lights. For individual zones, use the respective Zone ON/OFF buttons.
- Color Selection: Slide your finger across the Color Slider to choose from 16 million colors.
- Brightness Adjustment: Use the Dimming Slider to set the desired brightness level (1-100%).
- Dynamic Modes: Press the Mode button to switch between the 9 built-in color changing modes.
- Mode Speed: Adjust the speed of dynamic modes using the Speed- and Speed+ buttons.
- White Light: Press the White button to activate static white light.
The touch screen is highly sensitive, and each button touch will typically be accompanied by a sound and an LED indicator flash.


6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the tempered glass panel. Avoid abrasive cleaners or solvents that could damage the surface.
- Handling: The panel is made of high-end tempered glass. Handle with care to prevent scratches or breakage.
- Battery Replacement: Replace AAA batteries when the remote's performance degrades or it stops responding. Ensure correct polarity during replacement.
7. Troubleshooting
- Remote Not Responding: Check if the batteries are correctly installed and have sufficient charge. Replace if necessary.
- Lights Not Linking: Ensure the light is powered off and then on within 3 seconds before attempting to link. Follow the linking procedure precisely, touching the zone button 3 times shortly. If the light does not blink 3 times, repeat the process.
- Lights Not Unlinking: Ensure the light is powered off and then on within 3 seconds before attempting to unlink. Follow the unlinking procedure precisely, long pressing the zone or master button 5 times shortly. If the light does not blink 10 times with red color, repeat the process.
- Interference: While designed for 2.4GHz RF, strong interference sources nearby might affect control distance. Try to minimize other 2.4GHz devices if experiencing issues.
8. Warranty and Support
This Miboxer B3 Smart 4-Zone Touch Panel Remote Control comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For technical support or warranty claims, please contact your retailer or the official Miboxer support channels.