TELESIN GP-WBT-001

Contents

TELESIN Underwater Selfie Stick User Manual

Brand: TELESIN

Model: GP-WBT-001

1. Introduction

The TELESIN Underwater Selfie Stick is designed to enhance your underwater photography and videography experience. Featuring a wireless Bluetooth remote control and a robust waterproof design, this extendable selfie stick allows you to capture stunning moments with your GoPro Hero camera in various aquatic environments. Its hydrophobic structure and high-quality materials ensure durability and reliable performance up to 30 meters (98 feet) underwater.

TELESIN Underwater Selfie Stick in three different views: front, back, and extended with a GoPro camera attached.
Figure 1: TELESIN Underwater Selfie Stick - Product Overview
Video 1: Product Demonstration - Underwater use and extendable feature.

2. Package Contents

Please check the box to ensure all items are present:

  • Underwater Bluetooth Selfie Stick x 1
  • Locking Screw x 1
  • Charging Cable x 1
  • Anti-Lost Wrist Strap x 1
  • User Manual x 1
Diagram showing the contents of the TELESIN Underwater Selfie Stick package, including the stick, screw, cable, strap, and manual.
Figure 2: Package Contents

3. Specifications

FeatureDetail
Product NameUnderwater Remote Selfie Stick
Model NumberGP-WBT-001
Weight267g (9.8 Ozs)
MaterialAluminum alloy, Plastic (PC)
Waterproof DepthUp to 30 meters (98 feet)
Dimensions (Collapsed)25cm (7 inches)
Dimensions (Extended)85cm (33 inches)
Compatible Action Camera BrandGoPro
Compatible ModelsGoPro Hero 8, 9, 10, 11, 12, 13
Waterproof StandardIP68 (GB/T 4208-2017 and IEC 60529-2013)
Charging TimeApprox. 1.5 hours for full charge
Table showing product information including name, weight, material, waterproof depth, dimensions, and compatible models.
Figure 3: Product Specifications

4. Setup Guide

4.1 Attaching Your GoPro Camera

  1. Secure your GoPro Hero action camera onto the selfie stick's mount using the provided locking screw. Ensure it is firmly attached.

4.2 Bluetooth Pairing

  1. Activate your GoPro camera's Bluetooth connection.
  2. Press and hold the selfie stick's power button for 3 seconds. The Bluetooth will automatically search for and connect to your camera's signal.
Installation guide showing how to attach a GoPro camera to the selfie stick and pair it via Bluetooth.
Figure 4: Installation and Bluetooth Pairing Steps

4.3 Charging the Selfie Stick

Connect the charging cable to the selfie stick's charging port. The device supports touch charging and can be fully charged in approximately 1.5 hours.

Close-up of the selfie stick's charging port, indicating touch charging and quick charging time.
Figure 5: Charging Port and Indicator

5. Operating Instructions

5.1 Control Panel Functions

The selfie stick features an intuitive control panel for easy operation:

  • Power Button: Used to power the device on/off.
  • Shutter Button: Press to take photos or start/stop video recording.
  • Mode Button (M): Switch between different shooting modes on your GoPro camera.
  • Shooting Mode Indicators: Lights indicate the current shooting mode (e.g., photo, video).
Close-up of the selfie stick's control panel, labeling the Power, Shutter, and Mode buttons, and shooting mode indicators.
Figure 6: Control Panel Layout
Image highlighting the enlarged shoot button for easy touch control and indicator lights showing recording status.
Figure 7: Enlarged Shoot Button and Indicator Lights

5.2 Extending the Selfie Stick

The selfie stick can be extended from a collapsed length of 25cm to a maximum length of 85cm, allowing for a wider field of view and diverse shooting angles.

Diagram showing the selfie stick in both collapsed (25cm) and fully extended (85cm) positions.
Figure 8: Extendable Pole Dimensions

5.3 Underwater Usage

The selfie stick is designed for underwater use up to 30 meters. Its Bluetooth remote control allows for seamless shooting and video recording in fresh or saltwater environments. For depths greater than 10 meters, it is recommended to use your GoPro with a waterproof housing (not included).

Two TELESIN Underwater Selfie Sticks being used underwater, demonstrating remote control capabilities.
Figure 9: Underwater Remote Control Functionality

6. Maintenance and Care

Proper care will ensure the longevity and optimal performance of your TELESIN Underwater Selfie Stick:

  • After Seawater Use: First, shake off any excess seawater from the selfie stick. Then, soak it in fresh water for 10 minutes. After removing it from fresh water, rinse it under gentle running tap water for 5 minutes. Finally, wipe away any water droplets remaining on the surface with a soft, dry cloth and leave to dry completely.
  • Storage: Store the product in a dry, well-ventilated location when not in use.
  • Cleaning: Only use a soft, dry cloth for cleaning. Do not use harsh chemicals or abrasive materials.
  • General Care: Do not disassemble or damage this product. If it becomes deformed or damaged, stop using it immediately.
Important notes regarding product care, usage, and compatibility for the selfie stick.
Figure 10: Important Notes for Product Care

7. Safety Information

  • Always keep this user manual for future reference and include it if handing over the product to others.
  • Pay attention to all warnings and follow all instructions in this manual.
  • Do not cover the product with items like towels or clothes during charging to prevent fire hazards.
  • Do not drop the product or use it under high temperatures or short-circuit conditions.
  • Keep this product out of reach of children.
  • The product has passed the waterproof test of GB/T 4208-2017 and IEC 60529-2013 enclosure protection rating standard IP68.
  • It is not recommended to use the product in extreme water environments or unknown liquid environments.
  • Do not use the product in hot springs or corrosive liquids.

8. User Tips

  • Compatibility: This selfie stick is specifically designed for GoPro Hero 8, 9, 10, 11, 12, and 13 models. While it may physically fit other cameras, Bluetooth remote control functionality is guaranteed only for the specified GoPro models.
  • Enhanced Safety: Always use the anti-lost wrist strap provided to prevent accidental drops, especially in water.
  • Optimal Underwater Performance: For the best Bluetooth signal stability underwater, ensure your GoPro camera's firmware is up to date.
A hand holding the selfie stick with an anti-loss wrist strap attached.
Figure 11: Anti-Loss Wrist Strap
Icons of compatible GoPro Hero models: Hero 12, Hero 11, Hero 10, Hero 9, Hero 8.
Figure 12: Compatible GoPro Models

9. Warranty and Support

For any product inquiries, technical support, or warranty claims, please contact the seller or manufacturer directly through your purchase platform. Ensure you retain your proof of purchase for warranty validation.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.