JIKONG JK-B2A8S30P

Contents

JIKONG JK-B2A8S30P Smart BMS User Manual

Model: JK-B2A8S30P

1. Introduction

The JIKONG JK-B2A8S30P is a high-performance Smart Battery Management System (BMS) designed for 4S to 8S Li-ion, LiFePo4, and LTO battery packs. It features a 300A continuous charge/discharge current, 2A active balancing, and an integrated heating function. This BMS provides comprehensive protection and allows for easy monitoring and control via a mobile application and RS485 communication.

JIKONG JK-B2A8S30P Smart BMS front view
JIKONG JK-B2A8S30P Smart BMS

This Smart BMS is suitable for a wide range of applications, including E-bikes, Electric Tricycles, Low Speed Quads, Forklifts, Cleaning Cars, Tourist Cars, Industrial Drones, Scooters, RV Energy Storage, Energy Storage Cabinets, Power Banks, and Power Tools.

Application scenarios for JK Smart BMS including E-bikes, forklifts, and energy storage
Typical Application Scenarios

2. Specifications

The JK-B2A8S30P BMS offers robust features for battery management:

Key Specifications for JK-B2A8S30P
FeatureDescription
ModelJK-B2A8S30P
Battery Strings4S-8S (Li-ion/LiFePo4/LTO)
Continuous Charge/Discharge Current300A
Max Discharge Current (20S)350A
Balance FunctionActive Balanced BMS
Balance Current2A
Communication InterfacesBT/RS485/APP
Charge and Discharge PortCommon Port BMS
Heating FunctionYes (with heating interface)
Dimensions (L*W*H)174*107*18mm
CertificationsCE, FCC, RoHS
Diagram showing key specifications of the JIKONG B2A8S30P BMS
Key Features and Dimensions
Technical drawing showing dimensions of various JIKONG BMS models
BMS Dimensions (B1A8S10P/B1A8S20P/B2A8S20P shown, B2A8S30P has similar form factor)

3. Package Contents

Upon opening the package, please verify that all the following items are included:

  • JIKONG JK-B2A8S30P Smart BMS Unit
  • Wiring Harness (for cell voltage detection)
  • Temperature Sensor
  • User Manual (this document)
Image showing the JIKONG BMS unit, wiring, temperature sensor, and manual in its packaging
Typical Package Contents

4. Setup and Installation

Careful wiring is crucial for the correct and safe operation of your BMS. Please follow the diagrams and instructions precisely.

4.1. Wiring Diagrams

Connect the BMS to your battery pack according to the appropriate diagram for your cell count. Ensure all connections are secure and correct polarity is maintained.

Wiring diagram for JIKONG Smart BMS for 7S, 8S, and 10S Li-ion batteries
Connection Method for 7S, 8S, 10S Li-ion Battery
Wiring diagram for JIKONG Smart BMS for 3S, 4S, and 5S Li-ion batteries with heating pad connection
JK Smart BMS Wire Diagram for 3S, 4S, 5S Li-ion with Heating Pad
  • **Important:** Ensure that the last 'B+' line of the cable has been connected to the positive pole of the battery pack.
  • Before starting the BMS, the total voltage of the battery pack must be greater than 20V.

4.2. Heating Function Connection

The heating function is designed to protect the battery in cold environments by detecting battery temperature and activating heating when necessary. This function is only available on BMS models equipped with a heating interface (indicated by "Heat" in their model name).

  1. The heating function is achieved by detecting the battery temperature, combined with low temperature protection during charging, to achieve electricity pool heating control.
  2. The heating interface requires an external heating film or charger.
  3. The green cable connects to the heating film, and the red and black cables connect to the charger.
  4. The maximum heating power is 3A, and the maximum heating voltage is 100V.

Heating on condition:

  1. The battery temperature is lower than the low-temperature protection temperature for charge.
  2. By connecting the heating film for heating, the APP will activate heating, which will consume battery power.
  3. Heat through the charger: This is related to the protection board hardware and charger. Please confirm the technical status before ordering.

5. Operating Instructions

5.1. Mobile Application (APP) Usage

The JIKONG BMS can be easily monitored and controlled via a mobile application.

  1. Download APP: Search for "JIKONG BMS" in your mobile app store and download it.
  2. Bluetooth Connection:
    • Ensure your phone's Bluetooth is turned on.
    • Open the JIKONG BMS app.
    • Click on the top left corner of the app to search for devices.
    • Select your BMS device from the list.
    • Enter the default password: 1234.
  3. Parameter Settings:
    • The default parameter setting password is: 123456.
    • Use this to set the number of units (cells) and battery type (Li-ion, LiFePo4, LTO).
    • After setting the parameters, return to the real-time status page to check the battery status. If there is no error message, the operation is normal.
    • The blue font displayed on the APP represents the highest voltage, while the red font represents the lowest voltage.
Screenshots of the JIKONG mobile app showing Bluetooth connection and settings
Mobile APP Interface for Bluetooth Link and Control
Screenshots of the JIKONG mobile app showing various settings and data displays
Mobile APP Page Display with Active Balancing Support

5.2. Smart Energy Working Modes

The BMS supports different working modes to optimize battery life and performance:

Diagram illustrating the four smart energy working modes: Storage, Normal, Shutdown, and Standby
Smart Energy Working Mode Switching
  • Storage Mode: In transportation, storage, offline, or wireless transmission off mode, the BMS is in storage mode, which does not consume battery pack current.
  • Normal Working Mode: When the charger is inserted in the storage mode and off mode, the BMS will immediately return to the normal working mode, and all the protection functions, equalization functions, and communication functions will return to normal working.
  • Shutdown: To prevent the BMS from wasting power for a long time and damaging the battery pack, the BMS has an automatic shutdown voltage, and the BMS automatically shuts down when a cell falls below the shutdown voltage.
  • Standby Mode: When the battery pack is in the static state (no charge and discharge current and no equilibrium current), the BMS will automatically enter the standby state after the set time (1-30 days can be set) is exceeded.

6. Safety Information and Protection Features

The JIKONG BMS is equipped with multiple security protections to ensure the safety and longevity of your battery pack:

Diagram illustrating six security protection features: Overcharge, Short Circuit, Over Discharge, Overcurrent, ALL-IN, Over Temp
Six Security Protection Features
  • Overcharge Protection: Prevents over-charging, which can affect battery life.
  • Short Circuit Protection: Automatic protection when a short circuit is detected.
  • Over Discharge Protection: Prevents the battery from running out completely.
  • Overcurrent Protection: Prevents the current from exceeding the battery's safe range.
  • ALL-IN Protection: Prevents cable drop or poor contact.
  • Over Temperature Protection: Prevents the battery from overheating.

7. Maintenance

The JIKONG Smart BMS is designed for minimal maintenance. However, regular checks can help ensure optimal performance and longevity:

  • Visual Inspection: Periodically inspect the BMS and all wiring for any signs of damage, corrosion, or loose connections.
  • Cleanliness: Keep the BMS unit clean and free from dust and debris. Use a soft, dry cloth for cleaning.
  • Firmware Updates: Check the JIKONG BMS app periodically for any available firmware updates to ensure your BMS has the latest features and bug fixes.
  • Connection Integrity: Ensure all battery cell balance wires and main power cables remain securely connected.

8. Troubleshooting

If you encounter issues with your JIKONG BMS, refer to the following common problems and solutions:

FAQ section with troubleshooting tips for 'Do not turn on', 'Inaccurate voltage', 'Inaccurate current', 'Inaccurate capacity', and 'Inconsistent string number'
Common Troubleshooting Steps
  • BMS Does Not Turn On:
    1. Ensure that the last "B+" line of the cable has been connected to the positive pole of the battery.
    2. Start up after charging and ensure that the charger voltage is greater than 4V of the battery pack voltage.
    3. Check whether the charger has voltage output.
  • Inaccurate Voltage Reading:
    1. Measure the actual total pressure of the battery pack with a multimeter.
    2. Fill the actual total pressure in the "voltage calibration" on the parameter setting page of the app.
  • Inaccurate Current Reading:
    1. The B- and P- of the protection board are two 7AWG wires, both of which need to be connected in parallel, otherwise it will lead to current error.
    2. Measure the actual current of the battery pack with a clamp meter.
    3. Fill the actual current into the "current calibration" on the parameter setting page. The larger the actual current, the higher the calibration accuracy.
  • Inaccurate Capacity:
    1. An initial capacity estimated according to the monomer voltage when the protection board is powered on for the first time is inaccurate.
    2. After the protection board is discharged to the cut-off voltage and then fully charged, the capacity is calibrated, and the charging process cannot be interrupted.
  • Designed String Number Inconsistent with Actual String Number:
    1. Check whether the "unit quantity" in the parameter setting is set correctly in the app.
    2. If there is no voltage in two or more strings in the middle, check whether the acquisition cable has fallen off.

9. User Tips

  • Verify Wiring: Always double-check all wiring connections before powering on the BMS to prevent damage to the unit or battery pack.
  • App Monitoring: Utilize the mobile application to regularly monitor battery cell voltages, temperatures, and overall pack status. This helps in early detection of potential issues.
  • Parameter Customization: Take advantage of the app's parameter settings to fine-tune the BMS operation according to your specific battery type and usage requirements.
  • Heating Function: If operating in cold climates, ensure the heating function is correctly configured and connected to protect your battery's performance and lifespan.

10. Warranty and Support

The JIKONG JK-B2A8S30P Smart BMS is manufactured to high-quality standards and holds CE, FCC, and RoHS certifications, ensuring compliance with international safety and environmental regulations.

Images of RoHS, FCC, and CE product certification certificates
Product Certifications: RoHS, FCC, CE

For technical support, warranty claims, or any questions regarding the operation or installation of your BMS, please contact the official JIKONG customer support or your point of purchase. Keep your purchase receipt as proof of purchase.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.