1. Product Overview
The HWATEL 5-Band Cellular Signal Repeater Amplifier Booster is designed to enhance 2G, 3G, 4G, and 5G cellular signals, improving both voice communication and data network performance. This device supports multiple frequency bands, making it suitable for various regions and carriers worldwide. It features a durable aluminum case and real-time LCD displays for monitoring signal strength and status.
1.1 Package Contents
Before proceeding with installation, please verify that all items are present in your package:
- Signal Booster Unit (1 pcs)
- AC/DC Power Adaptor (1 pcs)

2. Specifications
| Feature | Description |
|---|---|
| Product Type | Modem Cable (Cellular Signal Repeater) |
| Supported Networks | 2G, 3G, 4G, 5G (Voice + Data) |
| Frequency Bands | B12/17 (700MHz), B13/14 (700MHz), B28 (700MHz APT), B20 (800MHz), B5 (850MHz CDMA), B8 (900MHz GSM), B4/66 (1700/2100MHz AWS), B3 (1800MHz DCS), B2/25 (1900MHz PCS), B1 (2100MHz WCDMA), B7 (2600MHz IMT) |
| Gain | 70 ± 3dB |
| Coverage Area | Up to 500 Square Meters (depending on outdoor signal strength and antenna setup) |
| Case Material | 5mm Aluminum Case |
| Protection | IP40 Protection, Water Proof |
| Dimensions (L x W x H) | 180mm x 168mm x 20mm (approx.) |
| Certifications | CE, FCC, RoHS |
| Origin | Mainland China |
2.1 Regional Band Support
The booster is available in different configurations to support specific frequency bands and carriers in various regions. Please refer to the images below to identify the correct model for your location and network.






3. Installation and Setup
Proper installation is crucial for optimal performance. Follow these steps carefully:
3.1 Pre-Installation Checklist
- Identify Signal Strength: Use your mobile phone to find the location with the strongest outdoor signal. This is where your outdoor antenna should be placed.
- Antenna Type: Ensure you have a suitable outdoor antenna (e.g., Yagi or panel antenna) and an indoor antenna (e.g., whip or dome antenna) for your needs.
- Cables: You will need coaxial cables with N-type connectors to connect the antennas to the booster. The booster has 'SM' (Service Mobile/Indoor) and 'BTS' (Base Transceiver Station/Outdoor) ports, which are typically N-Female connectors.
- Power Source: A standard AC power outlet will be needed for the power adaptor.
3.2 Installation Steps
- Mount Outdoor Antenna: Install the outdoor antenna at the location with the strongest signal, typically on a roof or pole. Point it towards the nearest cell tower. Ensure it is securely mounted and weatherproof.
- Run Outdoor Cable: Connect one end of the coaxial cable to the outdoor antenna and run the other end into your building to the location where the booster will be installed.
- Mount Indoor Antenna: Install the indoor antenna in the area where you want to improve signal coverage. Ensure it is positioned to maximize signal distribution.
- Run Indoor Cable: Connect one end of the coaxial cable to the indoor antenna and run the other end to the booster's location.
- Connect Antennas to Booster:
- Connect the cable from the outdoor antenna to the BTS port on the booster.
- Connect the cable from the indoor antenna to the SM port on the booster.
Important: Ensure a minimum separation distance of at least 10-15 meters (30-50 feet) between the outdoor and indoor antennas. This isolation prevents oscillation and ensures proper booster operation. Physical barriers like walls can also help.
- Connect Power: Plug the provided AC/DC power adaptor into the booster's power input and then into a wall outlet. The booster will power on.
- Check Indicator Lights: Observe the 5 LCD displays on the booster. They will show real-time signal strength and status for each band. A stable, strong signal indication means the system is working correctly.

4. Operating Instructions
Once installed and powered on, the HWATEL signal booster operates automatically. It continuously monitors the incoming signal from the outdoor antenna, amplifies it, and re-transmits it via the indoor antenna.
- LCD Displays: The five LCD screens provide real-time feedback on the signal strength and operational status for each of the five supported frequency bands. Monitor these displays to ensure optimal performance.
- Automatic Gain Control (AGC): The booster is equipped with AGC, which automatically adjusts the gain level to prevent overload and maintain stable operation, even with fluctuating outdoor signal conditions.
5. Maintenance
The HWATEL signal booster is designed for low maintenance. However, periodic checks can help ensure its longevity and consistent performance:
- Cable Connections: Periodically check all coaxial cable connections (outdoor antenna to booster, indoor antenna to booster) to ensure they are secure and free from corrosion.
- Antenna Position: Verify that outdoor and indoor antennas remain in their optimal positions and are not obstructed.
- Physical Condition: Inspect the booster unit and cables for any physical damage. The aluminum case provides IP40 protection and is water-resistant, but extreme conditions should be avoided.
- Ventilation: Ensure the booster has adequate ventilation to prevent overheating, although its design aims to minimize this risk.
- Cleaning: Clean the exterior of the booster with a soft, dry cloth as needed. Do not use harsh chemicals or abrasive materials.
6. Troubleshooting
If you experience issues with your signal booster, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Signal Improvement | Weak outdoor signal, incorrect antenna direction, poor cable connection, insufficient antenna isolation. | 1. Re-position outdoor antenna for stronger signal. 2. Ensure outdoor antenna is pointed correctly at the cell tower. 3. Check all cable connections for tightness and damage. 4. Increase separation between outdoor and indoor antennas. |
| Fluctuating Signal / Oscillation | Insufficient isolation between outdoor and indoor antennas. | 1. Increase the physical distance between the outdoor and indoor antennas. 2. Ensure there are physical barriers (e.g., walls, floors) between the antennas. 3. Adjust the angle of the indoor or outdoor antenna slightly. |
| Booster Not Powering On | Power adaptor issue, faulty outlet. | 1. Check if the power adaptor is securely plugged into the booster and the wall outlet. 2. Test the wall outlet with another device. 3. Try a different power adaptor if available. |
| LCD Displays Show Low Signal | Weak outdoor signal, outdoor antenna not properly aimed. | 1. Re-adjust the outdoor antenna's position and direction to capture a stronger signal. 2. Ensure the outdoor antenna is mounted in the best possible location. |
7. User Tips
- Antenna Separation: A common issue with signal boosters is feedback or oscillation caused by the indoor and outdoor antennas being too close. Always strive for maximum physical separation and ensure there are walls or other obstructions between them.
- Outdoor Signal Strength: The performance of your booster is directly related to the quality of the outdoor signal it receives. Invest time in finding the best location for your outdoor antenna.
- Cable Quality: Use high-quality coaxial cables with appropriate connectors (N-type) to minimize signal loss between antennas and the booster.
8. Warranty and Support
Your HWATEL 5-Band Cellular Signal Repeater Amplifier Booster is designed for reliability and performance. For any technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact the seller or manufacturer directly. Ensure you have your product model and purchase details ready when contacting support.