JIKONG JK-BMS Series (3S-8S)

Contents

JIKONG Smart Battery Management System (BMS) User Manual

Brand: JIKONG | Model: JK-BMS Series (3S-8S)

1. Introduction

The JIKONG Smart Battery Management System (BMS) is an advanced solution designed to protect and optimize the performance of lithium-ion (Li-ion), lithium iron phosphate (LiFePO4), and lithium titanate (LTO) battery packs. It features active balancing, comprehensive protection functions, and smart monitoring capabilities via Bluetooth-enabled mobile applications or PC software. This manual provides essential information for the safe and effective installation, operation, and maintenance of your JIKONG Smart BMS.

Video: JIKONG Smart BMS Product Overview.

2. Safety Information

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Always wear appropriate personal protective equipment (PPE) when working with batteries.
  • Ensure the battery pack is disconnected from any power source before installing or servicing the BMS.
  • Verify correct polarity and wiring connections before powering on the system. Incorrect wiring can cause severe damage to the BMS and battery.
  • Do not expose the BMS to water, moisture, or extreme temperatures unless specifically rated for such conditions.
  • Professional installation is recommended for complex battery systems.
  • Keep out of reach of children.

3. Package Contents

The standard JIKONG Smart BMS package typically includes the following components:

  • 1 x JIKONG Smart BMS Unit
  • 1 x Sampling Line (Balance Wire Harness, length 70cm)
  • 1 x NTC Temperature Sensor (length 40cm)
  • 1 x Power Switch Button (Free Gift, for all BMS models)
  • Accessory Screws (4 or 6 depending on model)

Note: For BMS models with heating function, a heating line is included. For models with built-in CANBUS core, 'C' will be indicated in the model name.

JIKONG Smart BMS Packing List

Image: Typical packing list for JIKONG Smart BMS.

JIKONG BMS Switch Button

Image: Activation switch with light (50cm cable).

4. Product Features

The JIKONG Smart BMS offers a range of advanced features for superior battery management:

  • Active Balancing: Efficiently balances cell voltage differences with 1A-2A active current, extending battery lifespan and improving stability.
  • Bluetooth Connectivity: Connects to mobile APP (iOS, Android, HarmonyOS) for real-time monitoring and parameter adjustment.
  • Multiple Communication Interfaces: Supports RS485, CAN, GPS, Display, Heat, and NTC for versatile integration.
  • Comprehensive Protection: Includes overcharge protection, over-discharge protection, overcurrent protection, short circuit protection, and temperature protection.
  • Robust Construction: Features a fully enclosed aluminum alloy shell for superior heat dissipation, dustproof, waterproof, anti-voltage, and anti-vibration performance.
  • High-Performance MCU: Equipped with a high-performance main control chip for efficient operation.
  • Customization: Offers personalized customization options for structure, hardware (temperature control, power display board, soft switch), and software (APP, host computer).
JIKONG Smart BMS Features Overview

Image: Overview of JIKONG intelligent active balanced power management system features.

JIKONG BMS Rich Interface

Image: Rich interface options including CAN, RS485, BT, NTC, Soft Switch, SOC Indicator, Key Switch, Active Equalizer.

5. Specifications

The following table details the technical specifications for various JIKONG Smart BMS models. Please refer to your specific model for exact parameters.

Technical IndexJK-B1A8S10PJK-B1A8S20PJK-B2A8S20PJK-B2A8S30P
Number of Battery Strings (Li-Ion)3S-8S3S-8S3S-8S3S-8S
Number of Battery Strings (LiFePo4)4S-8S4S-8S4S-8S4S-8S
Number of Battery Strings (LTO)6S-8S6S-8S6S-8S6S-8S
Balance MethodActive Balance (Full State On)
Balance Current1A1A2A2A
Conductive Resistance in Main Circuit0.3mΩ0.3mΩ0.3mΩ0.3mΩ
Continuous Discharge Current100A200A200A300A
Continuous Charge Current100A200A200A300A
Maximum Discharge Current (MAX 2min)200A300A300A400A
Over Charge Protection Current (ADJ)10-100A10-200A10-200A10-300A
Other Interfaces (Customized)RS485RS485RS485RS485
Other Interfaces (Customized)CANBUS HEATCANBUS HEATCANBUS HEATCANBUS HEAT
Size (mm)153*126*18mm189*94*24mm
Wiring OutputCommon Port
Single Cell Voltage Range1-5V
Voltage Acquisition Accuracy±5mV
Over Charge Protection Voltage1.2-4.35V Adjustable
Over Charge Release Voltage1.2-4.35V Adjustable
Over Current Detect Delay2-120S Adjustable
Over Discharge Protection Voltage1.2-4.35V Adjustable
Over Discharge Release Voltage1.2-4.35V Adjustable
Quantity of Temperature Detection1Pcs
Temp ProtectionYes
Short Circuit protectionYes
Coulomb CounterYes
Bluetooth FunctionSupport for Android iOS

Image: JIKONG Product Specifications table. Note: Data tolerance range is ±2mm.

JIKONG BMS JK-B2A8S20P Dimensions

Image: Dimensions for JK-B2A8S20P model (126mm x 108mm x 17.6mm, height 153mm).

JIKONG BMS JK-B1A8S10P Dimensions

Image: Dimensions for JK-B1A8S10P model (87mm x 153.9mm x 17.6mm).

6. Setup

6.1 Pre-installation Checklist

  • Verify your battery type (Li-ion, LiFePO4, LTO) and cell count (3S-8S).
  • Ensure all battery cells are balanced before connecting the BMS.
  • Gather necessary tools: wire strippers, crimpers, multimeter, heat shrink tubing, safety glasses, gloves.

6.2 Wiring the BMS

The JIKONG Smart BMS uses a common port for charge and discharge. Follow these general steps and refer to the specific wiring diagrams for your battery string configuration:

  1. Connect all balance cables: Carefully connect the sampling line (balance wire harness) to each cell of your battery pack, starting from B0 (negative terminal of the first cell) up to the highest cell (e.g., B8 for an 8S pack). Ensure the order is correct.
  2. Insert the balance cable into the BMS: Plug the balance wire harness connector into the designated port on the BMS.
  3. Connect the B-line and P-line to the battery: Connect the main negative terminal of the battery pack (B-) to the B- terminal on the BMS. Connect the main positive terminal of the battery pack (P+) to the P+ terminal on the BMS. The C- terminal on the BMS is for the common charge/discharge negative.
JIKONG BMS 24-String Wiring Diagram

Image: Wiring diagram for a 24-string cell configuration. Connect all cables, insert into BMS, then B-line and P-line to battery. P- is total positive electrode, B- is total negative electrode. Equal load of motor, inverter, and charger connect to P- and C-.

JIKONG BMS 16-String Wiring Diagram

Image: Wiring diagram for a 16-string cell configuration. Follow the same connection principles as the 24-string diagram.

JIKONG BMS 8-String Wiring Diagram

Image: Wiring diagram for an 8-string cell configuration. Ensure correct balance wire order and main power connections.

JIKONG BMS 4-String Wiring Diagram

Image: Wiring diagram for a 4-string cell configuration.

6.3 App/PC Software Installation

To download the mobile APP or PC software, scan the QR code located on the BMS panel. The APP supports iOS, Android, and HarmonyOS. The PC software allows for advanced monitoring and configuration.

6.4 Optional Display Connection

JIKONG offers various display units (2.5-inch, 3.2-inch, 4.3-inch touch screen) that can be connected to the BMS for direct monitoring. Connect the display cable to the designated 'Display' port on the BMS.

JIKONG 2.5 inch Display Connection

Image: JIKONG 2.5 inch Display with cable lengths (Cable C 280mm, Cable B 300mm, Cable A 3000mm). Short press to turn on/off screen, Long press to turn on/off BMS.

JIKONG 3.2 inch Display Connection

Image: JIKONG 3.2 inch Display with cable (400mm). Long press to turn on or turn off the BMS.

JIKONG 4.3 inch Touch Screen Display Connection

Image: JIKONG 4.3 inch Touch Screen Display with switch cable (120mm). Long press to turn on or turn off the BMS.

7. Operating Instructions

7.1 Power On/Off

To power on or off the BMS, use the provided switch button. A long press on the button typically activates or deactivates the BMS.

7.2 Monitoring with App/PC Software

Once connected via Bluetooth (for APP) or RS485/CAN (for PC software), you can monitor various battery parameters in real-time:

  • Voltage: Individual cell voltage, total pack voltage.
  • Current: Charge and discharge current.
  • Temperature: Battery temperature via NTC sensor.
  • State of Charge (SOC): Battery percentage.
  • Alarms: View any active protection alarms.
  • Cycles: Battery cycle count.
JIKONG BMS Mobile App Interface

Image: Mobile APP interface showing real-time battery data including voltage, current, temperature, SOC, alarms, and cycles.

JIKONG BMS PC Software Interface

Image: PC software interface for monitoring and setting inverter communication protocols.

7.3 Parameter Adjustment

The mobile APP and PC software allow you to freely adjust multiple protection values, such as:

  • Overcharge protection voltage
  • Over-discharge protection voltage
  • Overcurrent protection
  • Temperature limits
  • Balance settings

Always read the internal parameters of the protection board first before making any changes.

7.4 CAN Protocol Setup

For systems requiring inverter communication, the BMS supports various CAN protocols. These can be set up through the mobile APP or host computer software. Supported protocols include JIKONG, Growatt, NIU, Voltronic, China tower, and WOW.

JIKONG BMS CAN Protocol Selection

Image: Mobile APP interface for selecting and setting CAN protocols.

8. Maintenance

  • Keep the BMS clean and free from dust and debris.
  • Avoid exposing the BMS to harsh chemicals or solvents.
  • Regularly check all wiring connections for tightness and signs of corrosion.
  • Ensure adequate ventilation around the BMS to prevent overheating, especially for models without active cooling.
  • Periodically check the battery cell voltages to ensure they remain balanced.

9. Troubleshooting

9.1 App Connection Issues ('Make Pair Failure')

If you encounter a "Make Pair failure" message when trying to connect the BMS to the mobile app:

  • Check Password: The default password is often "1234". Ensure you are entering the correct password.
  • Bluetooth Status: Verify that Bluetooth is enabled on your mobile device and the BMS is discoverable.
  • Restart: Try restarting the mobile app and/or the BMS unit.
  • Proximity: Ensure your mobile device is close to the BMS for a stable Bluetooth connection.

9.2 General Connection Issues

  • Wiring: Double-check all wiring, especially the balance leads and main power connections, for correct polarity and secure contact.
  • Power: Ensure the battery pack has sufficient voltage to power the BMS.
  • BMS Status: Check for any indicator lights on the BMS that might signal an error.

9.3 Over-protection Alarms

If the BMS triggers an over-protection alarm (e.g., overcharge, over-discharge, overcurrent, temperature), identify the cause and rectify it. The mobile app or display unit will show the specific alarm. Do not bypass protection features.

10. User Tips

  • Hardware Version: Always identify your specific BMS hardware version (e.g., JK-B1A8S10P-HC) to ensure compatibility with software and accessories.
  • Wiring Verification: Before powering on, meticulously verify all wiring connections using a multimeter to prevent damage to the BMS or battery.
  • App Updates: Keep your mobile app updated to the latest version for optimal performance and new features.
  • Parameter Backup: Before making significant changes to BMS parameters via the app or PC software, record the original settings.

11. Warranty and Support

For any questions, technical assistance, or warranty claims, please contact the JIKONG BMS Flagship Store directly. Provide your product model and purchase details for efficient support.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.