JIKONG JK-B1A20S15P

Contents

JIKONG JK-B1A20S15P Smart BMS User Manual

Model: JK-B1A20S15P | Brand: JIKONG

1. Introduction

The JIKONG JK-B1A20S15P is an intelligent active balanced power management system (BMS) designed for 4S-24S series batteries, compatible with Li-ion, LiFePo4, and LTO battery types. This Smart BMS provides comprehensive protection and management for your battery pack, ensuring optimal performance and extended lifespan. It features active balancing technology, multiple communication interfaces, and support for mobile APP and PC software monitoring.

What is Active Balancing (Non-lossy Balancing)?

Active balancing transfers energy from cells with higher energy to those with lower energy, achieving voltage balance with minimal energy loss. Unlike passive balancing, it operates continuously regardless of charging, discharging, or idle states, until the voltage difference is within a set range. This method is highly efficient as it involves energy transfer without significant heat generation, allowing for larger balancing currents (commonly 1-2A) without affecting cooling. It is particularly suitable for larger capacity battery packs due to its efficiency in balancing over longer periods and with higher currents.

JIKONG JK-B1A20S15P Smart BMS with key features highlighted
Figure 1: JIKONG JK-B1A20S15P Smart BMS highlighting key features like BT/Display, BMS Type, Balancing Current, Battery Strings, and Charge/Discharge capabilities.

2. Package Contents

Please check the package carefully to ensure all items are present and undamaged:

  • 1 x JIKONG Smart BMS
  • 1 x Switch Key
  • 2 x Sampling Cables (70cm long)
  • 1 x NTC Temperature Sensor (40cm long)
Diagram showing the JIKONG BMS and its included accessories: switch, NTC sensor, and sampling lines.
Figure 2: Packing List - JIKONG BMS and its accessories.

3. Specifications

The JIKONG JK-B1A20S15P Smart BMS offers robust features and high-efficiency performance. Below are the detailed technical specifications:

JIKONG Product Specifications (JK-B1A20S15P)
Technical IndexValue
Number of Battery Strings (Li-Ion/LiFePo4/LTO)4S-24S
Balance MethodActive Balance (Full State On)
Balance Current1A
Conductive Resistance in Main Circuit0.35mΩ
Continuous Discharge Current150A
Continuous Charge Current150A
Maximum Discharge Current (MAX 20ms)300A
Over Charge Protection Current (μA)10-150A
Other Interfaces (Default)RS485
Other Interfaces (Customized)CANBUS, HEAT
Size (mm)162*102*20mm
Wiring OutputCommon Port
Single Cell Voltage Range1-5V
Voltage Detection Accuracy±5mV
Over Charge Protection Voltage1.2-4.35V Adjustable
Over Charge Release Voltage1.2-4.35V Adjustable
Over Current Detect Delay2-120S Adjustable
Over Discharge Protection Voltage1.2-4.35V Adjustable
Over Discharge Release Voltage1.2-4.35V Adjustable
Quantity of Temperature Detection3Pcs
Temp ProtectionYes
Short Circuit ProtectionYes
Coulomb CounterYes
Bluetooth FunctionSupport for Android/iOS phone
Diagram showing the dimensions of the JIKONG BMS in millimeters.
Figure 3: Product dimensions (Note: Data tolerance range is ±2mm).

4. Setup and Wiring

Proper installation and wiring are crucial for the safe and effective operation of your BMS. Please follow these steps carefully:

  1. Connecting all the cables: Ensure all necessary cables (sampling lines, NTC, switch key, communication cables) are prepared.
  2. Insert the cable into the BMS: Carefully insert the balance cables (sampling lines) into the designated ports on the BMS. Ensure they are securely seated.
  3. Connect the B-line and the P-line to the battery: Connect the main negative (B-) and positive (P-) lines from the BMS to your battery pack.

Wiring Method for 16-String Cells:

Wiring diagram for a 16-string battery cell configuration with the JIKONG BMS.
Figure 4: Wiring diagram for a 16-string cell battery pack. This diagram illustrates the connections for individual cells (B1-B16), NTC sensors, and the main P- and B- terminals to the load/charger.

Wiring Method for 24-String Cells:

Wiring diagram for a 24-string battery cell configuration with the JIKONG BMS.
Figure 5: Wiring diagram for a 24-string cell battery pack. This diagram shows the connections for individual cells (B1-B24), NTC sensors, and the main P- and B- terminals to the load/charger.

Interface Overview:

Detailed view of the JIKONG BMS interfaces including RS485/CAN, NTC, GPS, Display/Switch, and Hot ports.
Figure 6: Rich interface to meet daily needs, showing RS485/CAN, NTC, GPS, Display/Switch, and Hot ports.

5. Operation

The JIKONG Smart BMS offers intelligent interaction and easy operation through its mobile application and PC software.

5.1 Mobile APP Control

The mobile phone Bluetooth APP, named "JIKONG SMART BMS", acts as a personal lithium battery steward. It can be installed on iOS, Android, and HarmonyOS systems. The APP supports multiple languages and allows you to view various information such as voltage, current, temperature, and number of strings at a glance.

Screenshot of the JIKONG Smart BMS mobile application interface showing battery voltage, current, temperature, SOC, and individual cell voltages.
Figure 7: Mobile APP interface for multi-screen display and data connection.

Through the APP, you can freely adjust multiple protection values, including overcharge, overdischarge, overcurrent, temperature, and balance settings. Always read the internal parameters of the protection board first before making any changes.

5.2 PC Software Monitoring

For more detailed monitoring and advanced settings, the JIKONG BMS can be connected to a host computer via PC software. This allows for comprehensive real-time data display, logging, and control over various parameters.

Screenshot of the JIKONG BMS PC software interface displaying real-time data, settings, control options, and fault logs.
Figure 8: PC software interface for monitoring and setting parameters.

5.3 CAN Communication

The BMS supports RS485/CAN communication modes, which can be realized simultaneously through different interfaces. It is compatible with mainstream inverter communication protocols in the market. You can easily set up the CAN protocol through the mobile APP.

Mobile app interface showing CAN protocol selection and a list of supported CAN protocols for inverter communication.
Figure 9: Protocol docking, fast and convenient setup via mobile app.

6. Maintenance

The JIKONG Smart BMS is designed for durability and reliability with a fully enclosed aluminum alloy shell, providing effective dustproof and waterproof capabilities. It also features anti-voltage and anti-vibration properties, reducing damage from external environmental factors. Internal high-strength insulating material filling completely wraps components, absorbing vibration and external pressure.

To ensure long-term performance:

  • Keep the BMS clean and free from excessive dust or debris.
  • Avoid exposing the BMS to extreme temperatures or direct sunlight for prolonged periods.
  • Ensure all connections remain tight and free from corrosion.
  • Regularly check the battery pack for any signs of damage or swelling.
Image illustrating the dustproof, waterproof, anti-voltage, and anti-vibration features of the JIKONG BMS.
Figure 10: Dustproof and waterproof, anti-voltage and anti-vibration design.

7. Troubleshooting

If you encounter issues with your JIKONG Smart BMS, consider the following common troubleshooting steps:

  • No Power/No Display: Check all power connections to the BMS and the battery. Ensure the switch key is correctly installed and activated.
  • Balancing Issues: Verify that all sampling lines are correctly connected to each cell and are not loose or damaged. Check the balance current settings in the APP/PC software.
  • Communication Problems (Bluetooth/RS485/CAN): Ensure the mobile APP is updated to the latest version. For Bluetooth, confirm it's enabled on your device and the BMS is discoverable. For wired communication, check cable integrity and port connections.
  • Over-protection Triggered: If the BMS frequently triggers overcharge, overdischarge, or overcurrent protection, review your battery parameters and load requirements. Adjust protection thresholds in the APP/PC software if necessary, but always within safe limits for your battery chemistry.
  • Incorrect Readings: Double-check all wiring, especially the sampling lines, for correct polarity and secure connections.

For complex issues, it is recommended to consult the detailed documentation available through the JIKONG APP or contact JIKONG customer support.

8. User Tips

  • Detailed Manual: For the most comprehensive and up-to-date instructions, including advanced settings and specific wiring configurations, always refer to the digital manual or guides provided within the JIKONG Smart BMS mobile application or contact the seller directly.
  • Initial Setup: Before connecting the main battery terminals, ensure all balance wires are correctly and securely connected to the BMS and the battery cells. This prevents potential damage during initial power-up.
  • Parameter Adjustment: When adjusting protection parameters via the APP or PC software, proceed with caution. Understand the implications of each setting on your specific battery chemistry and application to avoid damaging the battery or BMS.
  • Firmware Updates: Periodically check for firmware updates for your BMS through the official JIKONG channels or APP. Updates often include performance improvements, bug fixes, and new features.

9. Warranty and Support

For any product-related inquiries, technical assistance, or warranty claims, please contact the JIKONG Factory Store directly. Ensure you have your product model number (JK-B1A20S15P) and purchase details ready when seeking support.

JIKONG is committed to providing high-quality products and excellent customer service. For more information about JIKONG and its technologies, you can refer to the company's official resources.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.