JIKONG JKBMS

Contents

JIKONG JKBMS Active Battery Balance Protection Board User Manual

Model: JK-BxA8S-20P Series

Version: 11.6.1

1. Product Overview

The JIKONG Lithium battery intelligent protection board (BMS) is a management system designed for large-capacity series lithium battery packs. It features voltage acquisition, high-current active balancing, overcharge/over-discharge/over-current/over-temperature protection, a coulomb meter, Bluetooth communication, and optional GPS remote functionality. This BMS is suitable for Lithium Iron Phosphate (LiFePO4), Ternary Lithium (Li-ion), and Lithium Titanate (LTO) battery types.

The protection board utilizes energy transfer active balancing technology with independent intellectual property rights, achieving a maximum continuous 1A/2A balance current. This high-current active equalization technology ensures battery consistency, improves battery range, and delays battery aging. It is compact, easy to operate, and full-featured, making it ideal for battery packs in small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage, base station backup power supplies, and solar power stations.

1.1. Functional Characteristics

  • LED Bluetooth status indicator
  • APP Bluetooth remote operation (Android and iOS support)
  • Battery capacity calculation
  • High precision voltage acquisition (±3mV)
  • High precision current acquisition
  • Support information screen display
  • Accurate time logging
  • Support RS485/CAN communication
  • Support heating function (optional)
  • Support GPS communication (optional)
  • Discharge precharge function (optional)
  • Comprehensive protection: Charge overcurrent, charge overvoltage, charge over-temperature, low-temperature protection during charge, discharge overcurrent, discharge undervoltage, discharge over-temperature, and short circuit protection.

1.2. Product Models and Configurations

The JK-BxA8S-20P series is available in various configurations:

Model Active Equalizing Current Max Charging Current Max Discharge Current
JK-B1A8S10P 1A 100A 100A
JK-B1A8S20P 1A 200A 200A
JK-B2A8S20P 2A 200A 300A
JK-B2A8S30P 2A 300A 400A

The BMS supports 3-8 series for Ternary Lithium batteries, 4-8 series for Lithium Iron batteries, and 7-8 series for Lithium Titanate batteries.

JIKONG BMS JK-B1A8S20P with key specifications
Figure 1: JIKONG BMS JK-B1A8S20P model highlighting key specifications like function (BT/Display), BMS type (Battery BMS), balancing current (1A), battery strings (4S-8S), charge/discharge (200A), and battery type (Li-ion/Lifepo4/LTO).
JIKONG BMS JK-BD6A8S10P with key specifications
Figure 2: JIKONG BMS JK-BD6A8S10P model highlighting key specifications like function (BT/Display), BMS type (Battery BMS), balancing current (0.6A), battery strings (4S-8S), charge/discharge (100A), and battery type (Li-ion/Lifepo4/LTO).
JIKONG Intelligent Active Balance Power Management System (BMS) overview
Figure 3: Overview of JIKONG Intelligent Active Balance Power Management System (BMS), compatible with 4S-8S series batteries and Li-ion, LiFePO4, LTO battery types. APP supports iOS, Android, and HarmonyOS. Highlights six major interfaces (GPS/RS485/CAN/Display/Heat/NTC), multi-interface display, high-performance MCU, continuous current (100A-300A), instantaneous current, and active balancing current (1A-2A).

2. Setup and Installation

2.1. Unpacking and Inspection

Handle the packing box and protection board gently; do not turn it upside down. Before unpacking, check if the package is intact, free from impact marks or damage.

2.2. Product Dimensions

The size of the JK-BxA8S-20P series protection board is 153mm × 126mm × 17.6mm.

Dimensions of JIKONG BMS JK-B2A8S20P
Figure 4: Dimensional drawing of the JK-B2A8S20P BMS, showing length (153mm), width (126mm), and thickness (17.6mm).
Dimensions of JIKONG BMS JK-B1A8S10P
Figure 5: Dimensional drawing of the JK-B1A8S10P BMS, showing length (153.9mm), width (87mm), and thickness (17.6mm).

2.3. Wiring Instructions

The JK-BxA8S-20P series protection board is suitable for 3-8 series lithium battery packs. The specific wiring method varies depending on the number of cells in the battery pack.

  1. Connect all the cables.
  2. Insert the cable into the BMS.
  3. Connect the B-line and the P-line to the battery.
Wiring diagram for an 8-string battery cell configuration
Figure 6: Wiring method for an 8-string battery cell configuration. Shows connections for total negative electrode (P-), total positive electrode, and individual cell balance wires (B- to B8).
Wiring diagram for a 4-string battery cell configuration
Figure 7: Wiring method for a 4-string battery cell configuration. Shows connections for total negative electrode (P-), total positive electrode, and individual cell balance wires (B- to B4).

2.4. Connector Pin Definitions

The BMS features several connectors for various functions:

Connector Type Pin Number Pin Name Description
XH-10AW (Balance & Acquisition) 1 B- Total negative battery
2 B1 The first battery positive
3 B2 The second battery positive
4 B3 The third battery positive
5 B4 The fourth battery positive
6 B5 The fifth battery positive
7 B6 The sixth battery positive
8 B7 The seventh battery positive
9 B8 The eighth battery positive
10 B+ Protection board power supply, connected to the battery
A1254WF-7A (Heating Interface) 1-5 HT- Heater element negative electrode
6 CD+ Charge indication input positive terminal
7 CD- Charge indication input negative terminal
C- C- Connect to external load or negative terminal of charger
A1254WF-6A (Display Interface) 1 VCC Display power output
1.25T-4PWT (GPS Interface) 1 VGPS Power output, voltage close to B+
2 TX UART TX, 3.3V
3 RX UART RX, 3.3V
4 GND Power/signal ground
A1254WF-3A (Communication Interface) 1 DN CAN_L/RS485-B signal negative
2 DP CAN_H/RS485-A signal positive
3 GND Signal ground
HY2.0-4P (Temperature Interface) 1 T1A First temperature sensor pin A
2 T1B First temperature sensor pin B
3 T2A Second temperature sensor pin A
4 T2B Second temperature sensor pin B
Top view of JIKONG BMS showing P- and B- terminals
Figure 8: Top view of the JIKONG BMS, clearly showing the P- (power negative) and B- (battery negative) terminals.
Side view of JIKONG BMS with connectors
Figure 9: Side view of the JIKONG BMS, illustrating the various connectors for balance, heating, display, GPS, and communication.
JIKONG BMS and accessories in packaging
Figure 10: The JIKONG BMS unit packaged with its accompanying wiring harness and accessories.
JIKONG BMS and accessories in box
Figure 11: JIKONG BMS and accessories, including balance wires and mounting screws, neatly arranged in the product box.
Back of JIKONG BMS with product label
Figure 12: Back of the JIKONG BMS showing the product label with model number, serial number, and QR code for APP download.

3. Operating Instructions

3.1. Device Activation

Before powering on the protection board, ensure the balance cables are properly connected and the P- and B- terminals are correctly wired. Verify that the protection board is securely fixed to the battery core. Incorrect connections can lead to abnormal operation or even damage.

The protection board does not have a power-on control switch. It is designed for charging activation mode, meaning the charger voltage should be 2V higher than the battery voltage. After battery assembly, connect the charger to activate the protection board.

Alternatively, the BMS supports key activation and display activation. If you have an optional display screen and button, simply insert the cable into the display interface and press the button to activate.

3.2. APP Installation and Parameter Setting

The JIKONG BMS features a mobile APP compatible with Android and iOS operating systems. Scan the QR code below to download the APP. Android devices require a minimum of Android 7.

QR code for JIKONG BMS mobile APP download
Figure 13: QR code for downloading the JIKONG BMS mobile APP.

Once installed, use the APP to check battery status, modify working parameters, and control charge/discharge switches. Refer to the "Instructions for Setting Protection Board Parameters" for detailed parameter settings.

3.3. Active Equalization

The BMS uses active equalization to transfer energy from high-voltage cells to low-voltage cells. Before using this function, set basic battery parameters in the APP, including cell count, battery capacity, trigger differential pressure (default), voltage calibration, and current calibration.

Users can set the balance trigger pressure difference (mV) in the APP. When balancing is enabled, it automatically activates if the voltage difference between any two battery strings exceeds the set value, and deactivates when the difference falls below the set value. The default balance current is 1A/2A. Adjust the balance current based on your battery capacity, ensuring it does not exceed 0.2C of the battery capacity. If not needed, disable the balancing switch in the APP's BMS control page.

3.4. GPS and Display Interface (Optional)

The BMS has reserved GPS and display interfaces. You can connect an optional GPS device for battery location tracking or a JIKONG display screen to view battery information. Select these options based on your specific needs.

Multi-screen display and data connection options for JIKONG BMS
Figure 14: JIKONG BMS multi-screen display and data connection options, including mobile APP, PC software, and dedicated home storage display. The mobile APP shows real-time data like voltage, current, temperature, SOC, alarms, and cycles.
Intelligent interaction and easy operation with JIKONG BMS displays
Figure 15: Intelligent interaction and easy operation with JIKONG BMS, showing adjustable protection values via PC software and a dedicated display for viewing voltage, current, temperature, and string count.

3.5. Heating Function (Optional)

The BMS supports an optional heating function. This uses a resistance heater or heating film to warm the battery at low temperatures, preventing reduced activity during charging and discharging. The designed heating current is 4A. You can enable/disable this function via the APP's BMS control page based on ambient temperature. It is recommended to use a temperature control switch (45°C to 65°C normally closed) in series with the heating circuit as a secondary protection to prevent thermal runaway.

3.6. Communication Function (Optional)

The BMS supports optional CAN/RS485 communication. You can select CAN or RS485 for multiplexed ports on the APP's BMS control page. When using communication, set the address and protocol according to your requirements. Refer to the Jikong Protection Board communication protocol document for details.

JIKONG BMS protocol docking and supported CAN protocols
Figure 16: JIKONG BMS protocol docking, showing compatibility with mainstream inverter communication protocols via mobile APP settings. A table lists supported CAN protocols such as Growatt, Victron, Pylontech, and others.

4. Maintenance

Regular maintenance of your JIKONG BMS ensures optimal performance and extends battery life. The active balancing technology helps maintain battery consistency, which is crucial for battery longevity.

4.1. Intelligent Sleep Function

The BMS includes an intelligent sleep function to reduce its own energy consumption. You can enable or disable this function via the APP. When the BMS is in standby (charging/discharging current less than 1A for 26 consecutive hours), it will enter sleep mode. To reactivate, press the button (if available) or connect the charger.

4.2. Aluminum Alloy Shell

The BMS features a high-quality aluminum alloy shell, which is made with one-piece molding technology. This design provides excellent heat dissipation and protects internal electronic components from external environmental damage, including anti-voltage and anti-vibration properties.

JIKONG BMS with aluminum alloy shell for heat dissipation
Figure 17: JIKONG BMS highlighting its aluminum alloy shell, designed for superior heat dissipation and protection of internal components.
JIKONG BMS with aluminum alloy shell protecting against environmental damage
Figure 18: JIKONG BMS emphasizing its robust aluminum alloy shell, which reduces damage from the external environment and provides anti-voltage and anti-vibration protection.

5. Troubleshooting and Protection Mechanisms

The JIKONG BMS is equipped with various protection functions to ensure the safety and longevity of your battery pack. These protections can be configured via the mobile APP.

5.1. Overvoltage Protection (Charge)

The BMS provides charge overvoltage protection. You can set the single cell overcharge protection voltage and recovery voltage in the APP. If any cell exceeds the set overvoltage during charging, the BMS will stop charging. Charging resumes when all cell voltages drop below the recovery voltage.

5.2. Undervoltage Protection (Discharge)

The BMS provides discharge undervoltage protection. Set the battery undervoltage protection voltage, recovery voltage, and automatic shutdown voltage in the APP. If any cell drops below the protection voltage during discharge, the BMS will trigger undervoltage protection and stop discharging. Discharge resumes when all cell voltages rise above the recovery voltage. If any cell drops below the automatic shutdown voltage, the BMS will automatically shut down.

5.3. Overcurrent Protection (Charge & Discharge)

The BMS includes charge and discharge overcurrent protection. Set the continuous charging/discharging current, overcurrent delay, and recovery time in the APP. If the current exceeds the set continuous current for the specified delay, the BMS will stop charging/discharging. Operation resumes after the recovery time. Note: The maximum continuous discharge current should not exceed 200A for some models.

5.4. Overtemperature Protection (Charge & Discharge)

The BMS provides charge and discharge over-temperature protection. Set the over-temperature protection and recovery values in the APP. If the temperature exceeds the set protection value, the BMS will stop the respective operation (charging or discharging). Operation resumes when the temperature falls below the recovery value.

5.5. Low Temperature Protection (Charge)

The BMS includes charge low-temperature protection. Set the low-temperature protection and recovery values in the APP. If the temperature falls below the protection value during charging, the BMS will stop charging. Charging resumes when the temperature rises above the recovery value. For extremely cold environments, consider using the optional heating function.

5.6. Short Circuit Protection

The BMS provides short circuit protection. You can set the short circuit protection delay (µs) and recovery time (s) in the APP. If a short circuit occurs, the BMS will stop operation and resume after the recovery time. If connecting a charger for the first time triggers short circuit protection, increase the delay time as it might be due to a high peak current from the charger. Similarly, for discharge short circuits, increase the delay time to ensure external wiring is not shorted, especially with loads having large capacitance.

5.7. Emergency Switch

The BMS has an emergency switch function. In case of over-temperature, over-discharge, over-charge, or cell string issues, activating the emergency switch in the APP will enable charge and discharge for 30 minutes, providing emergency operational time. The BMS will continue to operate for this duration even if a single cell reaches automatic shutdown voltage, preventing critical failures on the road.

6. Specifications

6.1. Basic Parameters

Parameter Value Unit
Supply Voltage 10-36 V
Operating Power Consumption <900 mW
Operating Temperature -30-70 °C
Maximum Number of Collection Strings 8 String
Maximum Balancing Current 1A or 2A A
Maximum Charging Current 200 A
Maximum Discharge Current 200 A
Maximum Instantaneous Current 400 A
Maximum Internal Loop Resistance 0.4 mΩ
Protective Plate Size 153*126*17.6 mm
Finished Weight 349 g
Detailed JIKONG BMS Product Specifications Table
Figure 19: Detailed table of JIKONG BMS product specifications, including battery strings, balance method, current, voltage ranges, and protection features.

6.2. Default Parameters

The BMS comes with default parameters for various battery types (Li-ion, LiFePO4, LTO). These can be adjusted via the APP.

Parameter Li-ion Default LiFePO4 Default LTO Default Unit
Balancing Initial Voltage 3 3 2 V
Maximum Balancing Current 1A or 2A 1A or 2A 1A or 2A A
Unit Overcharge Voltage 4.2 3.6 2.7 V
Unit Overcharge Protection Recovery 4.18 3.55 2.65 V
Monomer Undervoltage Protection 2.82 2.6 1.8 V
Monomer Undervoltage Protection Recovery 2.85 2.65 1.85 V
Automatic Shutdown Voltage 2.8 2.5 1.7 V
SOC-0% Voltage 2.9 2.6 1.85 V
SOC-100% Voltage 4.18 3.5 2.65 V
Trigger Balancing Differential Pressure 0.01 0.01 0.01 V
Charging Overcurrent Protection Delay 30 30 30 S
Charging Overcurrent Protection Release Time 60 60 60 S
Discharge Overcurrent Protection Delay 300 300 300 S
Discharge Overcurrent Protection Release Time 60 60 60 S
Short-circuit Protection Delay 1500 1500 1500 µS
Short Circuit Protection Release Time 60 60 60 S
Charging Overtemperature Protection Temperature 70 70 70 °C
Charging Overtemperature Restore Temperature 60 60 60 °C
Discharge Overtemperature Protection Temperature 70 70 70 °C
Discharge Overtemperature Recovery Temperature 60 60 60 °C
Charging Low Temperature Protection Temperature -20 -20 -20 °C
Charging Low Temperature Restore Temperature -10 -10 -10 °C
MOS Overtemperature Protection Temperature 100 100 100 °C
MOS Overtemperature Protection Recovery Temperature 80 80 80 °C
Device Address 0 0 0 /
Discharge Precharge Time 0 0 0 S

7. User Tips

  • Verify Functionality: Upon receiving your JIKONG BMS, immediately check its functionality and voltage output to ensure it is working correctly.
  • Be Aware of Design Changes: Newer versions of the board may feature design changes, such as different component layouts or connector placements. Familiarize yourself with the specific version you receive.

8. Warranty and Support

For any inquiries, technical support, or warranty claims, please contact JIKONG Official Store or Chengdu Jikong Technology Co.LTD. Ensure you have your product model and purchase details ready for efficient assistance.

Manufacturer: Chengdu Jikong Technology Co.LTD

Chengdu Jikong Technology Co. Ltd company information
Figure 20: Information about Chengdu Jikong Technology Co. Ltd, highlighting their expertise in active balance power battery management systems and commitment to product quality and environmental protection.

9. Manufacturing Process

JIKONG BMS products are manufactured with high-quality components and undergo rigorous testing to ensure reliability and performance.

Video 1: A glimpse into the manufacturing process of JIKONG BMS, showcasing automated assembly lines, quality control checks, and manual assembly stages.

Exploded view of JIKONG BMS components
Figure 21: Exploded view of the JIKONG BMS, detailing components such as cooling aluminum alloy, MOS transistors, JIKONG MCU, NTC thermistor, and sampling lines, highlighting high-quality appearance and efficient performance.
Close-up of JIKONG BMS circuit board with MCU
Figure 22: Close-up view of the JIKONG BMS circuit board, emphasizing selected core components and the efficient MCU chip.

10. Application Scenarios

The JIKONG BMS is widely applicable across various scenarios involving power lithium batteries, storage lithium batteries, and outdoor batteries.

Various application scenarios for JIKONG BMS
Figure 23: Illustrates diverse application scenarios for the JIKONG BMS, including E-bikes, Electric Tricycles, Low Speed Quads, Forklifts, Cleaning Cars, Tourist Cars, Industrial Drones, Scooters, RV Energy Storage, Lithium battery packs, Power Banks, and Storage batteries.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.