LAUNCH X-431 Creader Elite V2.0

Contents

LAUNCH X-431 Creader Elite V2.0 Diagnostic Tool User Manual

Your comprehensive guide to operating and maintaining your diagnostic tool.

1. Safety Precautions and Warnings

To prevent personal injury or damage to vehicles and/or the tool, read this user manual carefully and observe the following safety precautions at a minimum whenever working on a vehicle:

  • Never use this tool for any application other than for which it was designed.
  • Never alter or modify this tool in any way. Improper operation and/or maintenance of the tool, or modification of the tool could result in serious injury or death.
  • There are no user serviceable parts. Have the device serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the device is maintained.
  • Caution: This tool contains an internal Lithium Polymer battery. The battery can burst or explode, releasing hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush, pierce or dispose of the battery in fire or water.
  • This product is not a toy. Do not allow children to play with or near this item.
  • Do not expose the device to rain or wet conditions.
  • Do not place the device on any unstable surface.
  • Never leave the device unattended during charging process. The device must be placed on a non-flammable surface during charging.
  • Handle the device with care. If the device is dropped, check for breakage and any other conditions that may affect its operation.
  • Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or heavy dust.
  • Keep the tool dry, clean, and free of oil, water or grease. Use a mild detergent on a clean cloth to clean the enclosure of the device when necessary.
  • People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure.
  • Always perform automotive testing in a safe environment.
  • Do not attempt to operate or observe the tool while driving a vehicle. Operating or observing the tool will cause driver distraction and could cause a fatal accident.
  • Wear safety eye protection that meets ANSI standards.
  • Keep clothing, hair, hands, tools, test equipment, and other objects away from all moving or hot engine parts.
  • Operate the vehicle in a well-ventilated work area. Exhaust gases are poisonous.
  • Chock the drive wheels and never leave the vehicle unattended while running tests.
  • Use extreme caution when working around the ignition coil, distributor cap, ignition wires and spark plugs. These components create hazardous voltages when the engine is running.
  • Put the transmission in P (for A/T) or N (for M/T) and make sure the parking brake is engaged.
  • Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires within the work area.
  • Don't connect or disconnect any test equipment while the ignition is on or the engine is running.

2. Setup

2.1 Unboxing

The LAUNCH X-431 Creader Elite V2.0 package includes the main unit, an OBD2 diagnostic cable, a user manual, and a quick start guide. The device is designed for ease of use and durability.

Video: Unboxing and initial setup of the LAUNCH X-431 Creader Elite V2.0, showing the main unit, OBD2 cable, user manual, and quick start guide.
Package contents of LAUNCH X-431 Creader Elite V2.0
Image: Package contents including the main unit, OBD2 cable, user manual, and quick start guide.

2.2 Components & Controls

Familiarize yourself with the physical components and controls of the diagnostic tool:

  1. Charging Port (Type-C): Connect the charging cable here to power the tool.
  2. Diagnostic Connector (DB-15): Connects to the vehicle's Data Link Connector (DLC) using the diagnostic cable.
  3. Power Button: Turns the tool on or off.
  4. Touch Screen: Displays test results and allows interaction.
  5. Back Button: Exits the current screen or returns to the previous screen.
  6. Home Button: Navigates to the main menu screen.
  7. Settings Button: Provides quick access to the settings module.
Diagram of LAUNCH X-431 Creader Elite V2.0 components and controls
Image: Diagram illustrating the charging port, diagnostic connector, power button, touch screen, back button, home button, and settings button.

2.3 Powering Up

The tool can receive power via two methods:

  1. Via Charging Cable: Plug one end of the included Type-C charging cable into the tool's charging port and the other end into an external power supply.
  2. Via Diagnostic Cable: Insert one end of the diagnostic cable into the DB-15 connector of the tool, and the other end into the vehicle's DLC. The charging LED will illuminate solid green when the battery is fully charged.

The DLC is typically a 16-pin connector. It is usually located 12 inches from the center of the instrument panel, under or around the driver's side for most vehicles. For some vehicles with special designs, the DLC location may vary. Refer to the diagram below for common locations:

Diagram showing common DLC locations in a vehicle
Image: Common locations for the Data Link Connector (DLC) in a vehicle. A-Opel, Volkswagen, Audi; B-Honda; C-Volkswagen; D-Opel, Volkswagen, Citroen; E-Changan; F-Hyundai, Daewoo, Kia, Honda, Toyota, Nissan, Mitsubishi, Renault, Opel, BMW, Mercedes-Benz, Mazda, Volkswagen, Audi, GM, Chrysler, Peugeot, Regal, Beijing Jeep, Citroen and other most popular models.

Note: A plastic DLC cover may be found on some vehicles; remove it before plugging in the diagnostic cable. The cable connector is keyed and will only fit one way. If you have problems connecting, rotate the connector 180° and try again.

2.4 Getting Started (Initial Use)

When using the tool for the first time, you need to perform some system settings and update the diagnostic software. Follow these steps:

  1. Press the power button to turn the tool on.
  2. On the welcome screen, tap 'Start'.
  3. Select your desired system language, then tap 'Next step'.
  4. Choose your time zone, then tap 'Next step' to enter the WLAN setup screen.
  5. WLAN Setup: Slide the switch to ON. The system will search for available wireless LANs. Select your desired network. If it's an open network, it will connect directly. For encrypted networks, enter the security key (network password).
  6. After connecting to the network, tap 'Next step' to configure workshop information. Input the required details and tap 'Next step'.
    Note: Once configured, this information will be appended to every diagnostic report generated.
  7. Read the user agreement carefully, check the box to 'Agree to all the above terms', and tap 'OK' to complete the sign-up process and navigate to the Main Menu.

The tool is now ready for use.

3. Operating the Diagnostic Tool

3.1 Main Menu Overview

The main menu provides access to the tool's primary functions:

  • Local Diagnose: Configures the tool for professional diagnostic operations.
  • OBD II: Quick access to check Diagnostic Trouble Codes (DTCs), monitor status, verify repairs, and perform emission-related services.
  • Service Function: Offers coding, reset, relearn, and other service functions.
  • Software Update: Updates diagnostic software and APK.
  • Mall: Allows subscription to additional vehicle diagnostic software or service software.
  • Settings: Access system settings like units of measurement, brightness, sound, network, time zone, language, workshop information, recovery, and clean up.
  • More: Includes Launch Academy, Online Service, Toolbox, and Mine.
Main menu screen of LAUNCH X-431 Creader Elite V2.0
Image: The main menu screen showing icons for Diagnose, OBDII, Upgrade, Mall, and Settings.

3.2 Vehicle Diagnostics

This function is designed for in-depth diagnosis of electronic control systems for specific vehicle models (Volkswagen, Audi, Bentley, Skoda, Bugatti, Lamborghini, Seat, Volkswagen Commercial Vehicles). It offers comprehensive full-system code coverage and special test functions.

3.2.1 Smart Diagnostics (Auto-Detect)

This feature allows quick access to vehicle electronic control systems by decoding the Vehicle Identification Number (VIN) automatically, eliminating manual menu selection. Ensure 'Automatic detection on connect' is ON in Settings. After connection and ignition is on, the system enters auto-detect mode. Confirm the VIN and tap OK to start diagnosing all available systems. A diagnostic report will be automatically generated.

3.2.2 Manual Diagnostics

If VIN information cannot be obtained automatically, you can perform vehicle diagnosis manually. Select 'Local Diagnose' -> 'AutoDetect' (if 'Automatic detection on connect' is OFF) or follow the menu-driven commands to select vehicle manufacturer, model, and year. Ensure the corresponding vehicle manufacturer software is installed.

3.2.3 Health Report (Quick Test)

This function quickly accesses all electronic control units (ECUs) and generates a detailed report on vehicle health. Fault codes are marked with a red cross, and normally working systems with a green tick. You can save the diagnostic result as a report or clear existing trouble codes.

3.2.4 System Scan

This option quickly scans installed systems on the vehicle. After scanning, select the system to be tested to view its test functions.

3.2.5 System Selection

Manually select the test system and function step-by-step. Available functions include:

  • Version Information: Reads vehicle module information (name, type, ECU info).
  • Read Fault Code: Displays detailed information of DTCs.
  • Clear Fault Code: Erases DTCs from the vehicle after repairs. Ensure ignition is ON and engine is OFF before clearing codes.
  • Read Data Stream: Retrieves and displays live data and parameters from the vehicle's ECU. Data can be viewed as text, waveform graphs, or combined for comparison.
  • Actuation Test (Bi-directional Control): Accesses vehicle-specific subsystem and component tests. The tool sends commands to the ECU to drive actuators and determine system integrity. Examples include operating mirrors, turning wipers ON/OFF, fuel pump ON/OFF, injector buzz test, and A/C compressor activation.
  • Special Function: Offers coding, reset, relearn, and other service functions to restore functional status after repair or replacement.
Diagram of OE-level full system diagnosis and bi-directional testing
Image: Illustrates OE-level full system diagnosis capabilities including Auto-VIN, multi-system scanning, diagnostic reports, ECU information, and bi-directional active tests like fuel pump, injector buzz, radiator fan, and sunroof/windows/doors operation.

3.3 OBDII Diagnostics

This option provides a quick way to check for DTCs, isolate the cause of the Malfunction Indicator Lamp (MIL), check monitor status, verify repairs, and perform emission-related services for all OBD-II compliant vehicles.

  • Read I/M Readiness: Checks if emission-related systems are operating properly and ready for inspection.
  • Read Live Data: Retrieves and displays live ECU/PCM data stream, including graphical waveform displays.
  • Read Freeze Frame: Displays vehicle conditions recorded at the time an emission-related fault occurred.
  • Read Fault Code: Shows detailed descriptions of DTCs.
  • Clear Fault Code: Turns off Check Engine Light (MIL), clears codes, and resets monitors.
  • Test Results: On-Board Monitoring Test: Retrieves and displays test results for emission-related powertrain components and systems.
  • Control Operation of On-Board Component/System: Accesses vehicle-specific subsystem and component tests.
  • Read Vehicle Information: Displays VIN, Calibration ID (CID), and Calibration Verification Number (CVN).
  • EU OBFCM: Monitors fuel and energy consumption data to ensure compliance with EU regulations.
OBD II functions for all car makes
Image: Icons representing various OBD II functions: Read Codes, Erase Codes, View Live Data, View Freeze Frame, Turn Off MIL, O2 Sensor Test, EVAP System Test, I/M Readiness, Vehicle Information, On-Board Monitor Test.

3.4 Advanced ECU Coding

ECU Coding is an advanced function used to match, calibrate, relearn, and personalize ECU module components. It allows you to update vehicle software, re-code components after repairs/replacements, and address issues like drivability, fuel efficiency, power loss, and fault codes.

  • Component Matching: Write adaptive data to match various on-board modules after replacement.
  • Retrofit and Modification: Re-code replacement parts to the car.
  • Personalization: Adapt codes for personalized settings and improved vehicle comfort.
  • Disable Annoying Functions: Such as locking seat-belt warning sounds, injector buzz sounds, daytime running light, auto start/stop.
  • Un/lock Hidden Functions: Activate mirror folding, remove speed limits, remote window control, adjust ambient lighting brightness.
  • Customize Car OE-Settings: Retrofit headlamps, change tire size, retrofit batteries, customize dash kits.
  • Program VIN: Program VIN into replacement PCM.
Advanced ECU Coding features and examples
Image: Advanced ECU Coding features including unlocking hidden functions, disabling annoying functions, and customizing OE-settings, with examples like rear mirror folding, auto door lock/unlock, and interior lights.

3.5 Maintenance Service Functions (Resets)

The tool offers over 50 maintenance service functions to help vehicles return to functional status after repair or replacement. These include:

  • ABS Bleeding
  • Oil Lamp Reset
  • SAS Reset (Steering Angle Sensor)
  • Injector Reset (Injector Coding)
  • TPMS Reset (Tire Pressure Monitoring System)
  • EPB Reset (Electronic Parking Brake)
  • Gear Learning
  • Throttle Calibration
  • AFS Reset (Adaptive Front-lighting System)
  • Sunroof Initialization
  • E-G-R Adaptation
  • Crank/Cam Position Sensor Adaptive Learning
  • D-P-F Regeneration
  • Air Suspension Height Calibration
  • Battery Matching
  • Seat Calibration
  • Door Window Calibration
  • Height Calibration
  • Transmission Adaptation Learn
  • SRS Reset (Supplemental Restraint System)
  • Crank Case Pressure Sensor Relearn
  • Read/Set Injector Codes
  • Reset Air Conditioning Compressor
  • Transport Mode
  • Self-learning Cycle
  • Stop/Start Reset
  • Idle CO Adjust
  • Gear-shift Position Learn
  • Tyre Reset
  • Gear Selector Sensor Calibration
  • Clutch Matching
  • Clear Adaptive Data
  • Rain Sensor Initialization
  • Diesel Exhaust Fluid Level Check
  • Intelligent Cruise Control
  • Engine Power Balance Monitoring
  • Motor Angle Calibration
  • G-P-F Regeneration
  • Coolant Bleed
  • NOx Sensor Reset
  • Clutch Reset
  • Motor Replacement
  • Read ECU Configuration
  • HVAC Actuator Initialization
  • Alarm Triggers
  • Ignition Cycle Counter Reset
  • Fuel Tank Volume
  • Multimedia Video Reset
  • Adblue Reset
  • Mechatronics Adjustment

Note: Not all models support all reset functions. All special features are free and located in the diagnostics screen (Select Diagnose > Select Car Model, Year > Run Autovin > Select Module > Special Functions!).

All Free Reset Functions
Image: Overview of various reset functions including ABS Bleeding, Injector Coding, Oil Reset, TPMS Reset, EPB Reset, and more.

3.6 History

The tool records every diagnostic session. The History function provides direct access to previously tested vehicles, allowing you to resume from the last operation. Tap 'History' on the Local Diagnose screen to view records sorted by date. You can view details, delete specific records, or delete all historical records. 'Quick access' navigates directly to the function selection page of the last diagnostic operation.

4. Maintenance

4.1 Software Update

This function allows you to update the diagnostic software. All software is updated periodically, and it is recommended to install the latest version for optimal service and experience. Pre-installed diagnostic software updates are free forever. Software subscribed in the Mall is free for one year; after expiration, re-subscription is required.

To update, tap 'Software Update' on the main menu. Select the target software and tap 'Update' to start downloading. A stable network connection is required. Once downloaded, software packages will install automatically.

4.2 Firmware Fix

Use this module to upgrade and fix diagnostic firmware. During this process, do not cut power or switch to other interfaces.

4.3 Clean Up

This option allows you to clear cache files and free up storage space on the device.

5. Troubleshooting

5.1 DTC Library

This option allows you to retrieve detailed descriptions of Diagnostic Trouble Codes (DTCs) from the DTC database. Swipe up/down to alter the value and press OK to view the definition.

DTC Library function on LAUNCH X-431 Creader Elite V2.0
Image: The DTC Library interface, allowing users to look up diagnostic trouble code definitions.

5.2 Feedback

This module allows you to send feedback regarding diagnostic problems for further analysis and troubleshooting by the service team.

5.3 FAQ

This module lists frequently asked questions and answers related to the tool.

6. Specifications

6.1 Technical Specifications

FeatureSpecification
Screen4-inch touch screen, 480 x 800 pixels resolution
CPU4-core 1.5GHz processor
Operating SystemAndroid 8.1
RAM2GB
Storage16GB (ROM)
OBDII Input Voltage Range9~18V
Charging Power5V 1.5A (7.5W)
Battery Capacity3000mAh
Operating Temperature0°C to 50°C (32°F to 122°F)
Storage Temperature-20°C to 70°C (-4°F to 158°F)
WIFI Frequency2.4G HZ
Item Weight1kg (<540g for the unit itself)
Dimensions (Packing)76*175*250 mm
Communication InterfaceOBD-II
Software UpdateYes (Lifetime Free Update Via WiFi)
Wireless SupportWifi
Is Batteries IncludedYes
External Testing CertificationCC, FCC
Item TypeEngine Analyzer
Supported LanguagesEnglish, French, Spanish, German, Russian, Italian, Portuguese, Japanese, Korean, Polish, Traditional Chinese
Supported Car ListFor Volkswagen, For Volkswagen Commercial Vehicles, For Audi, For Bentley, For Skoda, For Bugatti, For Lamborghini, For Seat

7. Warranty and Support

7.1 Warranty Information

LAUNCH electronic products are warranted against defects in materials and workmanship for one year (12 months) from the date of delivery to the user. This warranty is limited to persons who purchase LAUNCH products for purposes of resale or use in the ordinary course of the buyer's business.

The warranty does not cover parts that have been abused, altered, used for a purpose other than intended, or used in a manner inconsistent with instructions. The exclusive remedy for any defective automotive meter is repair or replacement. LAUNCH is not liable for consequential or incidental damages.

Final determination of defects is made by LAUNCH. No agent, employee, or representative of LAUNCH has authority to bind LAUNCH to any affirmation, representation, or warranty concerning LAUNCH automotive meters, except as stated herein.

7.2 Customer Service

If you have questions about the operation of the unit, contact the seller or the LAUNCH TECH Service Center:

To resolve problems quickly, clearly indicate the Serial Number of your product when providing feedback.

7.3 Online Service & Launch Academy

The tool includes modules for 'Online Service' to contact support staff directly and 'Launch Academy' which provides repair cases, operation skills, and training videos for quick reference.

8. User Tips

  • Injector Management: For VAG group vehicles, the LAUNCH X-431 Creader Elite V2.0 supports advanced functions like 'Injector Reset (Injector Coding)' to program new injector codes after replacement and 'Injector Buzz Test' for active testing. You can also read live data streams related to injectors to monitor their performance.
  • Regular Updates: To ensure you have the latest features, vehicle compatibility, and bug fixes, regularly check for and install software updates via Wi-Fi. This is a lifetime free service for pre-installed software.
  • Diagnostic Reports: Utilize the tool's ability to generate and save diagnostic reports. These reports can be crucial for tracking vehicle health over time, sharing with mechanics, or for future reference.
  • Customization: Explore the ECU Coding features to personalize your vehicle's settings, disable annoying functions (like seat-belt warnings), or unlock hidden features (like mirror folding). Always ensure compatibility before making changes.

9. Compliance Information

This device complies with Innovation, Science and Economic Development Canada's licence-exempt RSSs and part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference; and
  2. This device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

The device for operation in the band 5150-5250MHz is only for indoor use.

This device is in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU. The RF frequencies can be used in Europe without restriction.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.