1. Introduction
The Tuya WiFi Intelligent Energy Meter is designed for precise monitoring of energy production and consumption in solar PV systems. It provides real-time data on voltage, current, power, power factor, and frequency for each channel, accessible via the Tuya or Smart Life mobile application. This manual will guide you through the installation, setup, operation, and troubleshooting of your energy meter.

Figure 1: Tuya WiFi Intelligent Energy Meter with CT clamps
2. Key Features
- High-Precise Measurement: Real-time monitoring of voltage, current, power, power factor, and frequency for each channel.
- Bidirectional Monitoring: Measures both energy production (from solar/PV) and consumption (to grid/load).
- Mobile App Control: Compatible with Tuya and Smart Life applications for remote monitoring and control.
- Power Statistics: Displays daily, monthly, and yearly energy totals for both forward and reverse energy.
- Abnormal Power Alarm: Real-time detection and notification for abnormal power levels.
- Automation Function: Set custom power or current thresholds to trigger actions within the app.
- Easy Installation: Designed for 35mm DIN rail mounting with simple CT clamp wiring.
- Calibration: Device can be calibrated by adjusting percentage settings in the app.
3. Technical Specifications

Figure 2: Technical Data
| Parameter | Value |
|---|---|
| Input Voltage | AC 100-240V 50/60Hz |
| Measuring Range | 0.2-80A / 0.2-100A (optional) |
| Wireless Frequency | 2.4GHz |
| Accuracy | Within ±2% |
| Module Size | 50*46*23mm |
| Clamp Diameter | 10mm |
| Clamp Cable Length | 0.7m |
| Working Temperature | -10 °C ~ +55 °C |
| Material | PC |
| Accuracy Grade | 1.0 |
4. Package Contents
The package includes the following items:
- 1 x Tuya WiFi Energy Meter
- Current Transformers (CTs):
- 1 x CT (for 1CT variant)
- 2 x CT (for 2CT variant)
5. Setup and Installation
5.1 App Download
To control and monitor your energy meter, download the 'Smart Life' or 'Tuya Smart' application on your mobile device.
- Scan the QR code provided in Figure 3, or search for 'Smart Life' or 'Tuya Smart' in your device's App Store (iOS) or Google Play Store (Android).
- Install the application on your smartphone.

Figure 3: Download the App
5.2 Physical Installation (Wiring)
The energy meter is designed for 35mm DIN rail mounting. Follow the wiring diagrams carefully. For safety, ensure power is OFF before installation.

Figure 4: 35mm Din Rail Mounting
General Wiring Diagram:

Figure 5: General Wiring Diagram
Wiring for Solar PV System (Energy Consumption and Generation):

Figure 6: Wiring for Solar PV System
Wiring to Measure 'from Grid' or 'to Grid':

Figure 7: Wiring for From/To Grid Measurement
Note: When installing, please ensure that the circuit measured by the Current Transformer (CT) is in the same phase as the circuit powered by the module.
5.3 Add the WiFi Meter to App
- Ensure your mobile phone's Bluetooth is turned ON.
- Power on the energy meter.
- Press the reset button on the meter for approximately 5 seconds until the red indicator light flashes quickly.
- Open the Tuya Smart or Smart Life app. The app should automatically detect the device or allow you to add it manually.
- Select "Smart Electric Meter" or "Smart meter (Wi-Fi)" from the device list (refer to Figure 8).
- Follow the in-app instructions to connect to your 2.4 GHz Wi-Fi network and enter the password. If your Wi-Fi is 5GHz, please ensure your router supports 2.4GHz and select it.
- Once successfully added, click 'Done' to start monitoring.

Figure 8: Add the WiFi Meter

Figure 9: WiFi Meter Added Successfully
5.4 Add the ZigBee Meter to App (If applicable)
Note: ZigBee meters require a ZigBee Gateway to function properly.
- Ensure your ZigBee Gateway is set up and connected to the internet.
- Power on the ZigBee energy meter.
- Press the reset button on the meter for approximately 5 seconds until the red indicator light flashes quickly.
- Open the Tuya Smart or Smart Life app and navigate to your Wireless Zigbee Gateway.
- Tap 'Add subdevice' (refer to Figure 10).
- Confirm that the LED is blinking quickly and follow the in-app instructions to add the device.
- Once successfully added, click 'DONE' to start monitoring.

Figure 10: ZigBee Meter Connection Diagram

Figure 11: Add ZigBee Subdevice
6. Operation
6.1 Energy Monitoring
After successful setup, open the app to view real-time energy data. The app displays:
- Forward energy Total (e.g., energy consumed from the grid)
- Reverse energy total (e.g., energy produced by solar and fed to the grid)
- Voltage, Supply frequency, Power total
- Power factor, Current, Power for each channel (A and B)

Figure 12: Real-time Energy Monitoring
You can also view electricity statistics over time (daily, monthly, yearly) to track trends and identify abnormal usage patterns.

Figure 13: Electricity Statistics
6.2 CT Clamp Direction
The direction of the CT clamp is crucial for accurate forward and reverse energy readings. Please ensure the clamp is installed in the correct direction.
- If your solar system is actively producing energy, adjust the clamp's direction until the App shows 'Reverse' energy increasing.
- If your solar system is not working (e.g., at night), adjust the clamp's direction until the App shows 'Forward' energy increasing (indicating consumption from the grid).
Perform this check for each channel.
WARNING!!! FOR SAFETY. If you need to remove the current transformer clamp, please be sure to turn off the power of the measuring device first, otherwise there is a risk of electric shock.

Figure 14: CT Clamp Direction for Forward/Reverse Energy
6.3 Abnormal Power Alarm and Automation
The meter supports real-time detection and alarming for abnormal power conditions. You can set custom automation rules within the app:
- In the app settings, navigate to "Abnormal power alarm" or "Overcurrent alarm".
- Set the desired power, voltage, or current thresholds.
- When these thresholds are triggered, the app will send push notifications to your mobile phone, and the device may emit a beeping sound.
- You can also create "Scenes" to trigger other smart home devices (e.g., turn off a switch) or send notifications when specific conditions (like current exceeding a value) are met.

Figure 15: Abnormal Power Alarm Settings and Create Scene
7. Maintenance
- Keep the device clean and dry. Avoid exposure to moisture or extreme temperatures.
- Regularly check wiring connections for tightness and signs of wear.
- Ensure the CT clamps are securely fastened and correctly oriented.
- Periodically check for app updates to ensure optimal performance and access to new features.
8. Troubleshooting (Q&A)
Q: After I configure it with the App, why does the App show 'Current' and 'Power' as '0'?
A: This typically happens if the CT clamp is not correctly installed or the monitored device is not drawing power. Ensure that only one wire (either live or neutral, but not both) of the device is placed inside the CT clamp, and that the device is turned ON and actively consuming power. The clamp needs to sense current flow to display values. Refer to Figure 14 for correct CT clamp installation and app readings.
Q: After I change the report rate to less than 10 Seconds, why does my App seem stuck?
A: This issue is usually due to a slow network return. Please sign out of the App and re-enter. Then, change the report rate back to 10 seconds. This should resolve the problem. Refer to Figure 15 for app settings related to report frequency.
Q: How to clear power statistics?
A: To clear power statistics, follow these steps:
- Power off the device and wait for 3 seconds.
- Power it on again and wait for another 3 seconds. (To prevent accidental clearing, data cannot be cleared if powered on for more than 30 seconds).
- Press the reset button 8 times in quick succession. The buzzer will beep twice, and the indicator light will flash quickly. This indicates the device is clearing data.
- After the device clears data, the indicator light will return to normal. Go to the APP page and click "Unbind and Clear Data".
Q: Does it work with Home Assistant?
A: The device is compatible with Tuya and Smart Life apps. For integration with Home Assistant, you would typically use a Home Assistant Tuya integration (e.g., Local Tuya) which may require specific setup and configuration. Please refer to Home Assistant documentation for Tuya device integration.
9. User Tips
- For accurate readings, ensure the CT clamp is installed correctly around a single live or neutral wire, not both.
- If experiencing app performance issues, especially after changing settings, try reverting to default settings or restarting the app.
- Regularly check the app for firmware updates for your device to ensure you have the latest features and bug fixes.
- When integrating with third-party smart home platforms like Home Assistant, always check for community-supported integrations and follow their specific setup guides.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's policy or contact the manufacturer directly. Keep your purchase receipt for any warranty claims.