Estardyn AHT20+BMP280

Contents

EstarDyn AHT20+BMP280 Sensor Module User Manual

High-precision Digital Temperature, Humidity, and Air Pressure Sensor

1. Introduction

The EstarDyn AHT20+BMP280 is a high-precision digital sensor module combining temperature, humidity, and atmospheric pressure sensing capabilities. This module integrates the AHT20 for temperature and humidity measurements and the BMP280 for atmospheric pressure. Designed for ease of use, it features an I2C main output, allowing for simple integration into various electronic projects and simultaneous connection with multiple I2C devices. Its compact size, low power consumption, and wide operating voltage range (DC 2.0V-5V) make it suitable for a broad array of applications requiring accurate environmental data.

2. Product Features

  • Integrated Sensing: Combines AHT20 (temperature, humidity) and BMP280 (atmospheric pressure) sensors on a single module.
  • I2C Communication: Utilizes the I2C interface for data output, simplifying wiring and enabling multi-device connectivity.
  • Wide Voltage Range: Operates efficiently with DC 2.0V to 5V, offering flexible power options.
  • Low Power Consumption: Designed for energy-efficient operation.
  • High Precision: Provides accurate temperature, humidity, and atmospheric pressure measurements.
  • Compact Design: Small form factor (1.5mm x 1.5mm) for easy integration into space-constrained projects.
  • Stable and Fast Transmission: Ensures reliable and quick data transfer.
  • Simple Circuitry: Easy to understand and implement in electronic designs.

3. Specifications

FeatureDetail
ModelAHT20+BMP280
Sensor TypeDigital Temperature, Humidity, Air Pressure
Output InterfaceI2C
Working VoltageDC 2.0V - 5V
Dimensions1.5mm x 1.5mm (Module size)
MaterialPolymer
TheoryHall Sensor
UseHumidity Sensor
CustomizationYes
High-concerned chemicalNone
OriginMainland China

Note: The 'Theory: Hall Sensor' and 'Use: Humidity Sensor' from the product properties might be generic classifications. The module specifically integrates AHT20 (capacitive humidity, NTC temperature) and BMP280 (piezoresistive pressure, NTC temperature).

4. Setup

The AHT20+BMP280 module is designed for straightforward integration using its 4-pin interface.

4.1. Identify Pins

The module features four pins:

  • VDD: Power supply input (DC 2.0V - 5V).
  • GND: Ground connection.
  • SDA: I2C Serial Data Line.
  • SCL: I2C Serial Clock Line.
Front view of the AHT20+BMP280 sensor module with pin labels (SCL, GND, SDA, VDD) and included pin headers.

Figure 1: AHT20+BMP280 Sensor Module Pinout

4.2. Wiring

Connect the module to your microcontroller (e.g., Arduino, ESP32) as follows:

  • VDD to your microcontroller's 3.3V or 5V power output (ensure it's within the 2.0V-5V range).
  • GND to your microcontroller's Ground.
  • SDA to your microcontroller's SDA pin (e.g., A4 on Arduino Uno, GPIO21 on ESP32).
  • SCL to your microcontroller's SCL pin (e.g., A5 on Arduino Uno, GPIO22 on ESP32).

Tip: A 4P GROVE Test cable can be used for quick and convenient connection if your development board supports the Grove connector standard.

4.3. Software Setup

  • Install necessary libraries for AHT20 and BMP280 sensors in your IDE (e.g., Arduino IDE). Popular libraries include "Adafruit AHTX0" and "Adafruit BMP280 Library".
  • Refer to the library documentation for specific initialization and reading functions.

5. Operation

Once connected and the software is set up, the module can be used to read environmental data.

  • Initialization: In your code, initialize the I2C communication and the AHT20 and BMP280 sensors. Each sensor typically has a unique I2C address.
  • Reading Data:
    • Temperature: Read temperature values from both AHT20 and BMP280. Note that the BMP280's temperature reading is primarily used for pressure compensation and might not be as accurate for ambient temperature as the AHT20.
    • Humidity: Read relative humidity from the AHT20 sensor.
    • Atmospheric Pressure: Read atmospheric pressure from the BMP280 sensor.
  • Data Processing: The raw sensor data will be converted into meaningful units (e.g., Celsius for temperature, % for humidity, hPa for pressure) by the libraries.
  • Multi-device Support: The I2C interface allows multiple I2C devices to share the same SDA and SCL lines, provided they have different I2C addresses.

6. Maintenance

  • Environmental Conditions: Store and operate the module in a dry environment, away from direct sunlight, extreme temperatures, and corrosive gases.
  • Handling: Handle the module with care to avoid physical damage to the sensitive sensor components. Avoid touching the sensor elements directly.
  • Cleaning: If necessary, gently clean the module with a soft, dry brush. Do not use liquids or solvents.
  • Power Supply: Ensure the power supply voltage remains within the specified DC 2.0V-5V range to prevent damage.

7. Troubleshooting

7.1. No Readings/Communication Errors

  • Check Wiring: Verify all connections (VDD, GND, SDA, SCL) are correct and secure.
  • Power Supply: Ensure the module is receiving power within the specified voltage range.
  • I2C Address: Confirm the correct I2C addresses are used in your code for both AHT20 and BMP280. An I2C scanner sketch can help identify connected devices and their addresses.
  • Library Installation: Make sure the required sensor libraries are correctly installed and included in your sketch.
  • Microcontroller I2C: Check if your microcontroller's I2C pins are correctly configured and functioning.

7.2. Inaccurate Readings

  • Environmental Factors: Ensure the sensor is not exposed to direct heat sources, drafts, or high humidity that could skew readings.
  • Sensor Placement: For accurate ambient readings, place the sensor in an open area, away from other heat-generating components.
  • Calibration: While these sensors are factory calibrated, extreme precision applications might require software-based offset adjustments.

7.3. Module Not Detected

  • Double-check all wiring.
  • Ensure the module is powered on.
  • Run an I2C scanner sketch to see if any I2C devices are detected on the bus.

8. User Tips

  • Code Examples: Search online for "AHT20 BMP280 Arduino example" or "AHT20 BMP280 Raspberry Pi" for numerous code examples and tutorials to get started quickly.
  • Data Logging: This module is ideal for environmental monitoring projects. Consider logging data to an SD card or sending it to a cloud service for long-term analysis.
  • Power Management: For battery-powered applications, leverage the low power consumption feature by putting the microcontroller and sensors into sleep modes between readings.
  • Protection: While the module is robust, consider adding a protective casing if deploying in harsh environments to shield it from dust and moisture.

9. Warranty & Support

For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.