Introduction
Thank you for choosing the BOROFONE BW65 True Wireless Bluetooth Earbuds. These earbuds are designed to provide a seamless audio experience with advanced Bluetooth 5.4 technology, long battery life, and a comfortable in-ear design. This manual will guide you through the setup, operation, and maintenance of your new earbuds.
Package Contents
Please check the package for the following items:
- BOROFONE BW65 True Wireless Earbuds (Left and Right)
- Charging Case
- USB Type-C Charging Cable
- User Manual
Specifications
| Feature | Specification |
|---|---|
| Model | BW65 |
| Bluetooth Version | 5.4 (JL AC6973 chip) |
| Charging Case Battery Capacity | 250mAh |
| Earbud Battery Capacity | 30mAh (each) |
| Music Playback Time | Up to 4 hours |
| Standby Time | Up to 150 hours |
| Dimensions (Charging Case) | 55.5 x 47 x 22mm |
| Total Weight | 38g |
| Material | PVC, ABS, Plastic |
| Maximum Wireless Range | <10m |
| Impedance Range | Up to 32 Ω |
| Frequency Response Range | 20 - 20000Hz |
| Max Output | 30mW |
| Charging Method | Type-C Cable |
| Waterproof | Yes |
| Microphone | Yes |
| Voice Assistant | Built-in support |
| Volume Control | Yes |
| Control Type | Touch Operation |
| Vocalism Principle | Dynamic |
Setup
1. Charging the Earbuds and Case
Before first use, ensure both the earbuds and the charging case are fully charged.
- Place the earbuds into the charging case.
- Connect the USB Type-C charging cable to the charging port on the case and plug the other end into a USB power source (e.g., wall adapter, computer USB port).
- The indicator light on the charging case will show charging status. It will typically turn off or change color when fully charged.
2. Pairing with Your Device
- Open the charging case. The earbuds will automatically power on and enter pairing mode.
- On your smartphone or Bluetooth-enabled device, go to the Bluetooth settings.
- Search for available devices and select "BOROFONE BW65" from the list.
- Once connected, you will hear a confirmation tone, and the earbuds will be ready for use.
3. Wearing the Earbuds
Gently insert the earbuds into your ears. Adjust them for a snug and comfortable fit to ensure optimal sound quality and stability.
Operating Instructions
The BOROFONE BW65 earbuds feature intuitive touch controls. The exact touch functions may vary slightly based on your device and application.
Basic Touch Controls:
- Play/Pause: Single tap on either earbud.
- Next Song: Double tap on the right earbud.
- Previous Song: Double tap on the left earbud.
- Answer/End Call: Single tap on either earbud.
- Reject Call: Long press on either earbud.
- Activate Voice Assistant: Triple tap on either earbud.
- Volume Control: This model supports volume control. Refer to your device's settings or specific app for precise control methods, as direct earbud touch control for volume is not explicitly listed.
Master-Slave Switching:
The earbuds support master-slave switching, meaning either earbud can be used independently. Simply take one earbud out of the case to use it in mono mode. To switch back to stereo, take the other earbud out, and they will automatically reconnect.
Maintenance
1. Cleaning
Regular cleaning helps maintain sound quality and hygiene.
- Use a soft, dry, lint-free cloth to wipe the earbuds and charging case.
- Do not use harsh chemicals, cleaning solvents, or strong detergents.
- Gently clean the ear tips and speaker mesh to remove any earwax or debris.
2. Storage
When not in use, store the earbuds in their charging case to protect them from dust and damage.
3. Waterproof Information
The earbuds are waterproof. This means they are resistant to sweat and light splashes, making them suitable for workouts. However, they are not designed for swimming or submersion in water. Ensure the charging port is dry before charging.
Troubleshooting
- Earbuds not pairing:
Ensure both earbuds are charged. Place them back in the case, close it, then open it again to re-initiate pairing mode. On your device, forget the "BOROFONE BW65" from your Bluetooth list and try pairing again. - Only one earbud working:
Place both earbuds back into the charging case. Close the lid for a few seconds, then open it again. This should reset the connection between the two earbuds. If the issue persists, try re-pairing with your device. - No sound:
Check the volume level on your device and ensure the earbuds are properly connected. Make sure the earbuds are charged. - Charging issues:
Ensure the charging cable is securely connected to both the case and the power source. Try a different USB port or charging adapter. Clean the charging contacts on the earbuds and inside the case.
User Tips
- For the best audio experience, ensure the earbuds fit snugly in your ears.
- Regularly clean the earbuds to prevent sound degradation due to earwax buildup.
- Always store the earbuds in their charging case when not in use to protect them and keep them charged.
Warranty and Support
BOROFONE products are manufactured to high-quality standards. For any support inquiries or warranty information, please refer to the contact details provided on the product packaging or the official BOROFONE website. Keep your proof of purchase for warranty claims.