1. Introduction
The JMCQ 10.1 inch Smart Screen Car Radio Multimedia Player is an advanced in-car entertainment and safety system designed to enhance your driving experience. It integrates wireless Carplay and Android Auto, dual Bluetooth connectivity, a high-resolution 4K front camera, and GPS navigation. This manual provides detailed instructions for the proper installation, operation, and maintenance of your device.
2. Safety Information
Please read all safety instructions carefully before using the device to ensure safe operation and prevent damage.
- Do not operate the device or watch videos while driving, as this may distract you and cause an accident.
- Ensure the device is securely mounted and does not obstruct your view of the road or interfere with vehicle controls.
- Avoid exposing the device to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
- Only use the provided power adapter and cables to prevent damage or fire hazards.
- If you experience any issues, consult the troubleshooting section or contact customer support. Do not attempt to repair the device yourself.
3. Package Contents
Verify that all items are present in your package:
- JMCQ 10.1 inch Smart Screen Car Radio Multimedia Player Unit
- Car Charger
- AUX Cable
- Mounting Bracket (Adhesive or Suction Cup, depending on model)
- User Manual
- Rear View Camera (Optional, depending on model)
4. Product Overview
The JMCQ Smart Screen Car Radio features a 10.1-inch HD IPS touch screen with a 2.5D anti-scratch surface. It offers a comprehensive set of features for navigation, entertainment, and driving assistance.
Key Features:
- Display: 10.1-inch HD IPS Touch Screen, 16:9 Screen Ratio, 2.5D Anti-scratch Surface.
- Connectivity: Wireless Carplay, Wireless Android Auto, Phone Mirror (MirrorLink), Dual Bluetooth 5.0, Wi-Fi, AUX, FM Transmission.
- Cameras: 4K (3840x2160P) Front Camera, 1080P Rear View Camera (optional).
- Recording: Dual Channel Recording, Loop-Cycle Recording, G-Sensor, NightShot Function, Real Time Surveillance.
- Navigation: External GPS Logger, supports various navigation apps.
- Audio: Audio Recorded, Dual Bluetooth Audio Transmission with six noise reduction technologies (Denoise, Directin Tone, Digital Sound Enhancement, Acavity, SF.Ears, Audio Splitting).
- Control: Touch Screen, Siri/Google Voice Control, Motion Detection, Parking Monitor, Automatic White Balance, Wide Dynamic Range.
- Mounting: Multiple mounting options including adhesive and suction cup mounts with 360° adjustable view angle.
Dimensions:
5. Setup and Installation
5.1 Mounting the Device
The device offers multiple mounting options to suit your vehicle's dashboard. Choose between an adhesive mount or a suction cup mount. Ensure the chosen location does not obstruct your view or interfere with airbags.
- Clean the dashboard surface thoroughly where you intend to mount the device.
- Attach the chosen bracket (adhesive or suction cup) to the back of the main unit.
- Secure the mount to the dashboard. For suction cup mounts, press firmly and engage the lever to create a vacuum seal. For adhesive mounts, peel off the protective film and press firmly for at least 30 seconds.
- Adjust the viewing angle using the 360° adjustable mechanism to ensure optimal visibility without blocking your forward vision.
5.2 Power Connection
- Connect the car charger to the device's power input port.
- Plug the other end of the car charger into your vehicle's 12V power outlet (cigarette lighter socket).
- The device will power on automatically when the vehicle's ignition is turned on.
5.3 Rear Camera Installation (Optional)
If your model includes a rear view camera, follow these steps for installation:
- Mount the rear camera at the back of your vehicle, typically above the license plate, ensuring a clear view. The camera is IP68 waterproof.
- Route the camera cable to the main unit, ensuring it is securely tucked away and does not interfere with vehicle components.
- Connect the rear camera cable to the designated input port on the main unit.
- Connect the rear camera's power wire to your vehicle's reverse light power source (usually the positive wire of the reverse light) to enable automatic display when reversing.
6. Operating Instructions
6.1 Wireless Carplay (for iPhone users)
- On your iPhone, go to Settings.
- Turn on Bluetooth.
- On the JMCQ device, click the PHONE LINK function.
- Select the Bluetooth name of the JMCQ device from your iPhone's Bluetooth settings to connect.
- Once connected, Carplay will automatically launch on the JMCQ screen.
6.2 Wireless Android Auto (for Android users)
Note: This feature may not be supported in all countries, and Google Play services may need to be available locally.
- On your Android phone, go to Settings.
- Turn on Bluetooth.
- On the JMCQ device, click the PHONE LINK function.
- Search for and select the Bluetooth name of the JMCQ device from your phone's Bluetooth settings to pair.
- Confirm the pairing on both devices. Android Auto will then launch.
6.3 Bluetooth Connection (General)
The device supports Dual Bluetooth 5.0 for stable and longer-distance connections, enabling wireless audio output and hands-free calling.
- Ensure Bluetooth is enabled on both the JMCQ device and your mobile phone.
- On the JMCQ device, navigate to the Bluetooth settings or the 'PHONE LINK' function.
- Search for available devices on your phone and select the JMCQ device's Bluetooth name.
- Confirm pairing if prompted.
6.4 FM Transmission
Use the FM transmitter function to synchronize the device's audio with your car's existing audio system.
- On the JMCQ device, activate the FM Transmitter function.
- Select an unused FM frequency on the JMCQ device.
- Tune your car's FM radio to the exact same frequency.
- Audio from the JMCQ device will now play through your car's speakers.
6.5 Voice Control (Siri/Google Assistant)
After connecting your iPhone via Carplay or Android phone via Android Auto, you can use voice commands for navigation, music, and other applications.
- Activate Siri (for iPhone) or Google Assistant (for Android) through the device's interface or by using the designated voice command.
- Examples of commands: "Show rear camera", "Turn off display", "Turn on display", "Navigate to [address]", "Play [song/artist]".
6.6 Dual Channel Recording (Dashcam)
The device supports simultaneous recording from the 4K front camera and the optional 1080P rear camera, providing comprehensive video evidence.
- Loop Recording: The device continuously records, overwriting the oldest footage when the memory card is full.
- G-Sensor: Automatically detects sudden movements or collisions and locks the current video footage to prevent it from being overwritten.
- Parking Monitor: When the vehicle is parked, the device can detect impacts and automatically start recording (requires continuous power supply).
- NightShot Function: Enhances video quality in low-light conditions.
6.7 Reverse Assist
When a rear camera is connected and properly installed, the system will automatically display the real-time reversing view on the screen when the vehicle is put into reverse gear.
- The display includes parking lines to assist with safe maneuvering.
- The rear camera features 140° wide angle, night vision, and IP68 waterproof rating.
6.8 Multimedia Playback
The device supports various multimedia formats for audio and video playback. You can play music and videos stored on a Micro SD/TF card or streamed via connected devices.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the screen and device body. Avoid using abrasive cleaners or solvents.
- Software Updates: Periodically check for software updates to ensure optimal performance and access to new features. Follow the on-screen prompts or instructions provided by JMCQ for updates.
- Memory Card: Regularly format your Micro SD/TF card (at least once a month) to prevent data corruption and ensure continuous loop recording. Back up important footage before formatting.
- Storage: When not in use for extended periods, store the device in a cool, dry place away from direct sunlight.
8. Troubleshooting
- Q: The device is not powering on.
- A: Ensure the car charger is securely plugged into both the device and the vehicle's 12V power outlet. Check if the vehicle's ignition is on. Test the 12V outlet with another device to confirm it's working.
- Q: Wireless Carplay/Android Auto is not connecting.
- A: Make sure Bluetooth is enabled on both devices. Ensure you have selected the correct Bluetooth name for the JMCQ device. Try restarting both the JMCQ device and your phone. For Android Auto, verify that Google Play services are up to date and available in your region.
- Q: Can I install other apps on the device?
- A: The device supports Wireless Android Auto, which allows access to compatible apps from the Google Play Store on your connected phone. The device itself has Wi-Fi connectivity, which may allow for direct app installation depending on the specific model and firmware, but primarily it mirrors apps from your phone.
- Q: The navigation map is outdated or not working.
- A: The device comes with a preloaded Navitel map for testing. You can download and install your preferred local navigation apps from the Google Play Store (via Android Auto). Map data is typically updated annually; contact JMCQ customer support for download links if needed.
- Q: The rear camera display is not appearing when reversing.
- A: Check if the rear camera is securely connected to the main unit. Ensure the rear camera's power wire is correctly connected to your vehicle's reverse light power source.
9. Specifications
| Feature | Specification |
|---|---|
| Brand Name | JMCQ |
| Item Type | Car DVR / Portable Recorder |
| Display Size | 10.1 inch |
| Display Type | OLED (IPS Touch Screen) |
| Screen Ratio | 16:9 |
| Camera Resolution | 3840x2160 (4K) |
| Pixels | 1200Mega |
| Number Of Lenses | 2 (Front & Rear) |
| Front Camera | 4K 3840*2160P |
| Rear View Camera | 1920*1080P (Optional) |
| Imaging Sensor | 1/3" Sony CCD |
| View Angle | 140° |
| Frames Per Second | 30 |
| Video Code | H.264 |
| Video Format | TS, MP4 |
| Max External Memory | 256G |
| Memory Card Required Reading Speed | Class 10 |
| Data Storage Capacity | 32G/64G/128G/256G (TF storage card options) |
| GPS logger | External |
| Power Source | Corded Electric |
| Battery Type | Car power + Built-in Power 4500 |
| Battery Life | Need connect power (No internal battery for standalone operation) |
| Cable Length | 6m |
| Weight | 1.1kg |
| OSD Language | Chinese (Simplified), Chinese (Traditional), Dutch, English, French, Italian, Japanese, Korean, Russian, Spanish, Thai, Vietnamese |
| Certification | CE |
| Special Features | G-Sensor, Digital zoom, Motion detection, SD/MMC card, With Rearview Mirror, Anti Surge Voltage Impact, Waterproof, Anti Fog, Anti Vibration, Real Time Surveillance, Automatic White Balance, Wide Dynamic Range, Wi-Fi function, Bluetooth, Parking Monitor |
10. User Tips
- For optimal performance of Carplay and Android Auto, ensure your phone's operating system is up to date.
- To maintain clear audio quality, ensure the FM frequency chosen for transmission is free from other radio stations.
- Regularly check the mounting bracket for stability, especially after driving on rough roads, to prevent the device from falling.
- If using a Micro SD/TF card for recording, consider using a high-quality Class 10 card for reliable performance.
11. Warranty and Support
The JMCQ Smart Screen Car Radio Multimedia Player comes with a one-year warranty from the date of purchase.
For any technical assistance, warranty claims, or general inquiries, please contact JMCQ customer support through the seller's platform or official contact channels. Please have your purchase details and product model information ready when contacting support.
