1. Introduction
Thank you for purchasing HM Digital's AquaPro digital water tester (model AP-2). The AP-2 is an easy-to-use digital meter that measures Electrical Conductivity (EC), a key indicator of overall water purity, and also measures temperature.
The AquaPro series features a sleek design and is ideal for tech-savvy and health-conscious consumers.
Key Applications:
- Check the performance of your water filter.
- Ensure your drinking water is at the correct conductivity level.
- Monitor nutrient levels in water for plants and fish.
- Test your pool or spa water quality.
- Measure EC levels for various other applications.
The HM Digital AP-2 EC Meter in use, showing electrical conductivity and temperature.
Product overview video demonstrating the HM Digital AP-2 EC Meter.
2. Product Overview
Familiarize yourself with the components of your AP-2 EC Meter:
Labeled diagram of the HM Digital AP-2 EC Meter components.
Key Components:
- Battery Case: Houses the CR2032 button cell battery.
- Display Screen: Shows EC and temperature readings.
- On/Off Button (POWER): To power the device on or off.
- Mode Button (MODE ▲): Used for temperature scale selection and calibration.
- Hold Button (HOLD ▼): Freezes the current reading on the display.
- Electrodes (Metal Pins): Submerged in water to measure EC.
- Thermistor: Measures water temperature.
- Protective Cap: Covers and protects the electrodes when not in use.
The meter also features a magnetic housing for convenient storage, such as on a refrigerator.
3. Specifications
| Feature | Specification |
|---|---|
| EC Range | 0-9999 μS (μS/cm) |
| EC Resolution | 1 μS |
| Temperature Range | 0-80°C; 32-176°F |
| Temperature Resolution | 0.1°C/F |
| Accuracy | +/-2% (of the reading) |
| Automatic Temperature Compensation (ATC) | Yes (0-80°C) |
| Calibration | Factory calibrated to 1413 μS; adjustable (digital push button) |
| Power Source | 1 x 3V button cell (CR2032) |
| Battery Life | Approx. 2 years |
| Dimensions | 15 x 2.8 x 1.3 cm (5.9 x 1.1 x 5 in.) |
| Weight | 42.5 g (1.5 oz) (without case) |
| Housing | Water-resistant |
| Display Type | DIGITAL |
| Backlight | No |
| Smart Device | No |
Example water conductivity values for various water types.
4. Setup
Battery Installation:
The AP-2 meter requires one CR2032 3V button cell battery (not included with some packages). To install or replace the battery:
- Locate the battery compartment on the top of the meter. It may be tight.
- Carefully remove the battery compartment cover.
- Insert a new CR2032 battery, ensuring the positive (+) side is facing forward (upwards).
- Replace the battery compartment cover securely.
5. Operation
Taking EC Measurements:
- Remove the protective cap from the bottom of the meter.
- Press the POWER button to turn the meter on.
- Immerse the meter into the water or solution up to the maximum immersion level (approximately 2 inches or 4 cm). Do not submerge the entire meter.
- Lightly stir the meter to dislodge any air bubbles that may be trapped on the electrodes.
- Wait for the display to stabilize. This usually takes approximately 10 seconds.
- Once the reading stabilizes, you can press the HOLD button to freeze the reading on the display, allowing you to view it out of the water.
- After usage, shake off any excess water from the electrodes and replace the protective cap.
- For convenient storage, the meter features a magnetic housing, allowing it to be stuck to a refrigerator or other magnetic surface.
The AP-2 display showing EC and temperature in different units.
Switching Temperature Modes:
The temperature will always be displayed on the screen simultaneously with the EC reading.
- To switch between Fahrenheit (°F) and Celsius (°C), press the MODE button once.
- Each press of the MODE button will toggle between the two temperature scales.
6. Calibration
Your HM Digital AP-2 meter is factory calibrated to a 1413 μS KCI solution. This calibration is suitable for most applications. If you are unsure whether recalibration is necessary, it is recommended to consult a professional.
Important Calibration Notes:
- Do not switch the AP-2 into calibration mode unless you are certain you need to recalibrate the meter.
- If you accidentally enter calibration mode, turn the meter off immediately to cancel the operation. This prevents accidental calibration to an incorrect value (e.g., zero).
- Before attempting to calibrate, ensure you have a certified bottle of KCI or NaCl calibration solution. Any brand of appropriate strength will work.
- Never calibrate the meter using distilled or de-ionized water (which typically has an EC below 2 ppm).
For more detailed and complete calibration instructions, please refer to the official HM Digital website: www.hmdigital.com/calibration_maintenance.html.
7. Maintenance and Precautions
- Water Resistance: The meter is water-resistant, but not water-tight. Do not submerge the entire meter. Water entering the unit will void the warranty.
- Storage: Avoid storing the meter in high temperatures or direct sunlight. Damage caused by user error or carelessness will void the warranty.
- Tampering: Do not attempt to open the housing or tamper with the internal electronics of the unit. Any unauthorized work will void the warranty.
- Care: Although durable, the AP-2 is an electronic instrument and should be handled with proper care and maintenance to ensure its longevity and accuracy.
- Cleaning: After each use, rinse the electrodes with clean water and gently shake off excess water before replacing the protective cap.
8. User Tips
- Always ensure the protective cap is securely in place when the meter is not in use to protect the electrodes.
- Keep the electrodes clean for accurate readings. A gentle rinse with clean water after each use is usually sufficient.
- If the display seems dim or unresponsive, check the battery.
9. Frequently Asked Questions (FAQ)
- Q: Is the product exactly as pictured, specifically the HM Digital AquaPro AP-2? The description mentions "2 types, we will ship in random." Could I receive a different product?
- A: This manual is specifically for the HM Digital AquaPro AP-2 EC Meter. While some seller descriptions might mention minor variations (e.g., packaging or slight cosmetic differences), the core product functionality and model (AP-2) should remain consistent with the described features and specifications.
10. Warranty and Support
Two-Year Limited Warranty:
This product is warranted to the purchaser against defects in material and workmanship for two (2) years from the date of purchase.
What is Covered:
- Parts and labor, or replacement at the company's option.
- Transportation charges for the repaired or replaced product back to the purchaser.
What is Not Covered:
- Transportation charges for sending the product to the company for warranty service.
- Damages resulting from abuse, improper maintenance, or failure to follow operating instructions and precautions.
- Any other consequential damages, incidental damages, or incidental expenses, including damages to property.
Note: Some jurisdictions do not allow limitations on implied warranties or exclusions of incidental/consequential damages, so the above limitations may not apply to you. This warranty provides specific legal rights, and you may have other rights which vary by state/region.
How to Obtain Warranty Performance:
To obtain warranty service, please include the following with your product:
- Your name, address, and phone number.
- A detailed description of the problem.
- Proof of the date of purchase.
- The name of the company from which the product was purchased.
Return the product to:
HM Digital, Inc.ATTN: Returns
5819 Uplander Way
Culver City, CA 90230, U.S.A.
Contact Information:
HM Digital, Inc.5819 Uplander Way
Culver City, CA 90230, U.S.A.
Tel: 800-383-2777, 310-410-3100
Fax: 310-410-3103
Website: www.hmdigital.com
Email: info@hmdigital.com
ISO-9001 Certified. Designed in U.S.A. and Korea. Made in China.