GAN GAN 354 M V2

Contents

GAN 354 M V2 Magnetic Puzzle Magic Cube User Manual

Model: GAN 354 M V2

1. Safety Instructions

  • The Magic Cube consists of small parts. To prevent choking hazards, please do not put it into the mouth.
  • Children should always play with the cube under adult supervision.

California Proposition 65 Warning

⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

2. Product Overview

The GAN 354 M V2 is a high-performance magnetic 3x3x3 speed cube designed for cubers seeking a smaller, more flexible feel. It features advanced magnetic positioning, an upgraded tension system, and a durable design for smooth and stable solving.

GAN 354 M V2 cube with magnetic force illustration
The GAN 354 M V2, showcasing its powerful magnetic system.
GAN 354 M V2 cube with 54mm dimension indicated
Compact 54mm size for a better fit, especially for one-handed cubing.

3. Setup and Tuning

The GAN 354 M V2 comes pre-assembled. Optimal performance can be achieved by adjusting the tension system to your preference.

3.1. GAN Elasticity System (GES) Adjustment

The cube is equipped with an upgraded GES v3, featuring GTN (GAN Tension Nut) and Wing-Shaped Numerical IPG (Iron-Plastic-Gears). This system allows for precise tuning of the cube's elasticity and feel.

Diagram of Upgraded GES components: GTN and Wing-Shaped Numerical IPG
Components of the Upgraded GES system, including GTN and Wing-Shaped Numerical IPG.

To adjust the tension:

  1. Locate the GTN on each side of the cube (under the center cap).
  2. The GTN offers 0.6mm and 0.8mm positions, providing 2 distances for tension adjustment.
  3. Turn the GTN to the desired position and replace the nuts to secure the setting. Experiment with different settings to find your preferred feel.

3.2. Magnetic System

The GAN 354 M V2 features 48 visible GAN Magnet Capsules (GMC) for precise magnet positioning, ensuring a consistent and stable feel during solves. The magnets are perfectly capped into notches, preventing loss or misalignment.

Cross-section view of the cube showing GAN Magnet Capsule (GMC)
Internal view of the GAN Magnet Capsule (GMC) for precise magnet placement.
Transparent view of the cube showing 48 visible GAN Magnet Capsules
Visible GAN Magnet Capsules ensure consistent elastic force and speed.

4. Operating Instructions

4.1. Holding Method

Hold the Magic Cube with one hand and use the other hand to flick or rotate the layer that needs to be moved.

4.2. Basic Rotations

Standard notation for cube rotations:

  • **R (Right):** Turn the right layer 90 degrees clockwise.
  • **L (Left):** Turn the left layer 90 degrees clockwise.
  • **U (Up):** Turn the upper layer 90 degrees clockwise.
  • **D (Down):** Turn the lower layer 90 degrees clockwise.
  • **F (Front):** Turn the front layer 90 degrees clockwise.
  • **B (Back):** Turn the back layer 90 degrees clockwise.

To indicate an anti-clockwise rotation, add an apostrophe ('). For example, R' means turning the right layer 90 degrees anti-clockwise.

A '2' after a letter indicates a 180-degree rotation. For example, U2 means turning the upper layer 180 degrees.

4.3. Advanced Features for Performance

  • **All Symmetry Locked Clips Design:** Provides upgraded strength and stable joints, minimizing cracks and improving overall stability.
  • **Honeycomb Contact Surface:** Ensures more endurable lubrication and smoother handfeels due to a larger extended contact area.
  • **Classic Corner Feet & Triple Edge Feet:** Designed for superior anti-Corner-Twist and anti-Pop performance.
  • **Fillet Curve Line:** Optimized for excellent corner-cutting, allowing the cube to perform well even at tough angles (Positive Corner-Cutting 55°, Reverse Corner-Cutting 30°).
Exploded view of a cube corner showing All Symmetry Locked Clips Design
All Symmetry Locked Clips Design for enhanced stability.
Close-up of a cube piece showing Honeycomb Contact Surface
Honeycomb Contact Surface for improved lubrication and feel.
Diagram of Classic Corner Feet and Triple edge feet design
Classic Corner Feet and Triple edge feet design for anti-Corner-Twist and anti-Pop.
Diagram showing Fillet Curve Line and corner-cutting angles
Fillet Curve Line for optimal corner-cutting performance.

5. Maintenance

  • **Cleaning:** When cleaning the Magic Cube, do not use water directly. Instead, wipe it with a dry cloth to remove dust and grime.
  • **Lubrication:** If the Magic Cube does not rotate smoothly, apply an appropriate amount of specialized cube lubricant into the gaps between the pieces.
  • **Screw Check:** Regularly check if the screws of the Magic Cube are loose. Tighten them appropriately if necessary to maintain stability and performance.

6. Troubleshooting

  • **Cube feels rough or slow:** Apply a small amount of cube lubricant to the internal mechanisms.
  • **Loose or wobbly pieces:** Check the tension settings (GES) and tighten the screws if needed.
  • **Popping or Corner Twists:** The GAN 354 M V2 is designed with anti-Pop and anti-Corner-Twist features. If these issues occur, ensure the cube is properly assembled and tensioned.

7. Specifications

Attribute Detail
Model Number GAN 354 M V2
Type 3x3x3 Puzzle Cube
Features Magnetic
Material Plastic
Dimensions 54mm x 54mm x 54mm
Weight 0.198 kg
Magnetic System GAN Magnet Capsule (GMC), 48 visible magnets
Tension System Upgraded GES v3 (GTN with 0.6/0.8mm positions, Wing-Shaped Numerical IPG)
Recommended Age 6-12Y, 12+Y, 14+Y

8. User Tips

  • **Verify Your Model:** This manual is specifically for the GAN 354 M V2. Ensure you have the correct version for accurate instructions.
  • **Regular Lubrication:** For the smoothest turns and best performance, regularly apply a small amount of high-quality speed cube lubricant.
  • **Experiment with Tension:** Don't be afraid to adjust the GES settings. Finding your ideal tension can significantly improve your solving experience.
  • **Practice Consistently:** Like any skill, cubing improves with regular practice.

9. Warranty and Support

For detailed warranty information, please refer to the seller or manufacturer's official website. Keep your proof of purchase for any warranty claims.

A digital version of the user manual (PDF) may be available for download. You can often find this on the product page or the manufacturer's support section. For example, a PDF user manual is available at: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.