4DRC 4D-S6

Contents

4DRC S6 Remote Control Shark Boat Toy Instruction Manual

Model: 4D-S6 | Brand: 4DRC

1. Introduction

The 4DRC S6 Remote Control Shark Boat Toy is a high-simulation, electric RC toy designed for water-based fun. Featuring a bionic joint design for realistic swimming, twin propellers for powerful movement, and a 2.4Ghz remote control system, this toy offers an engaging experience. Optional models include a waterproof 4K camera for high-definition shooting and mobile app remote control. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting.

4DRC S6 Remote Control Shark in water with remote control and smartphone attached
The 4DRC S6 Remote Control Shark, featuring 2.4G remote control, optional HD camera, and mobile app control.

2. Safety Information

  • WARNING: Not suitable for children under 36 months. Small parts may pose a choking hazard.
  • Always operate the RC shark in open water areas, away from people, animals, and obstacles.
  • Ensure the battery compartment is securely sealed before placing the shark in water to prevent damage.
  • Do not touch the propellers when the shark is powered on and in water.
  • Use only the provided charging cable and battery. Do not attempt to charge damaged batteries.
  • Avoid operating the shark in strong currents or extreme weather conditions.
  • Supervise children during operation.

3. Package Contents

Please check the package contents upon unboxing. The exact contents may vary slightly depending on the version (with or without camera).

  • 1x Remote Control Shark Boat Toy
  • 1x 2.4Ghz Remote Control
  • 1x Modular Rechargeable Battery (3.7V 1000mAh or 1200mAh)
  • 1x USB Charging Cable
  • 1x Screwdriver
  • 1x User Manual (this document)
  • (Optional, for camera version) 1x Waterproof HD Camera
Contents of the No Camera version package: remote control, charging cable, battery, screwdriver, and the shark toy.
Typical package contents for the 'No Camera' version.

4. Specifications

FeatureSpecification
Product NameSimulation Remote Control Shark
Model Number4D-S6
Brand Name4DRC
TypeBoat & Ship (Submarine Design)
MaterialPlastic, Electronic Components
Power SourceElectric (Lithium Battery)
Battery Capacity1000mAh / 1200mAh (Modular)
Charging Voltage3.7V
Charging TimeApprox. 60 Minutes
Flight/Endurance Time16-20 Minutes
Remote Control Frequency2.4Ghz
Remote DistanceApprox. 50 meters (40m stated in description)
Control Channels4 Channels
Controller ModeMODE1, MODE2
Dimensions (Shark)38.5 x 15.5 x 10 CM
Recommend Age14+ years
FeaturesRemote Control, Waterproof, One-Click Water Spray, Cool Light Effect, 360° Rotation, Alcoholic Induction (Water Sensor), Optional HD Camera, Mobile App Control
Diagram showing the dimensions of the remote control shark (39x15.5x10 CM) and its standard color box (21.9x17x9.5 CM).
Dimensions of the RC Shark and its packaging.
Product parameters and remote control analysis diagram. Parameters include product name, camera distance, battery capacity, material, endurance time, and product size. Remote control analysis shows buttons for lighting control, switch, spray keys, indicator light, go ahead, retreat, turn left, turn right.
Detailed product parameters and remote control layout.

5. Setup

5.1 Charging the Battery

  1. Locate the modular battery compartment on the underside of the shark. Use the provided screwdriver to open it if necessary.
  2. Remove the modular battery.
  3. Connect the battery to the USB charging cable.
  4. Plug the USB cable into a suitable USB power source (e.g., computer, USB wall adapter).
  5. The indicator light on the charging cable will show charging status (refer to cable instructions for specific light behavior).
  6. Charging typically takes about 60 minutes. Disconnect once fully charged.
Image of a modular battery for the RC shark, highlighting its easy demolition and large capacity.
Modular battery for convenient charging and replacement.

5.2 Battery Installation (Shark)

  1. Ensure the battery is fully charged.
  2. Open the battery compartment on the shark.
  3. Insert the modular battery, ensuring correct polarity.
  4. Securely close the battery compartment cover and tighten with the screwdriver. Ensure the waterproof sealing ring is properly seated to prevent water ingress.
Diagram illustrating the dual-layer waterproof design with a rubber ring seal and an independent battery cover.
Dual-layer waterproof protection for the battery compartment.

5.3 Remote Control Setup

  1. Install 2x AAA batteries (not included) into the remote control, observing polarity.
  2. Turn on the remote control using the power switch.
  3. Place the RC shark into water. The 'Alcoholic Induction' feature means the shark will automatically activate upon contact with water.
  4. The remote control and shark should automatically pair. If not, turn both off and on again, ensuring the shark is in water during the pairing process.
Image showing the remote control and the RC shark in water, emphasizing the 2.4Ghz signal and the need to place the shark in water for signal pairing.
Remote control and shark pairing process, highlighting the water induction feature.

5.4 (Optional) Camera and App Setup

For models equipped with a camera:

  1. Ensure the camera is securely installed and waterproofed.
  2. Download the dedicated mobile app (refer to packaging or product details for app name/QR code).
  3. Connect your smartphone to the shark's Wi-Fi network (details usually found in the app or shark's instructions).
  4. Open the app to view real-time footage and control camera functions.
Three panels showing the waterproof high-definition camera, real-time watch feature, and mobile app remote control interface.
Features of the optional HD camera: waterproof, real-time viewing, and app control.

6. Operating Instructions

6.1 Basic Controls

Refer to the remote control diagram in Section 4 for button layout.

  • Go Ahead: Push the left joystick forward.
  • Retreat: Pull the left joystick backward.
  • Turn Left: Push the right joystick left.
  • Turn Right: Push the right joystick right.
  • 360° Rotation: Combine left/right turns with forward/backward movement for flexible maneuvers. The multi-joint flexible tail allows for realistic swimming and turning.
Image depicting the RC shark performing a 360-degree rotation in water, emphasizing flexible movement.
The RC shark's ability to perform flexible 360-degree rotations.
Image showing the RC shark's multi-joint flexible tail simulating a real shark's swing, reducing water resistance.
The multi-joint flexible tail simulates realistic shark movement.

6.2 Special Features

  • One-Click Water Spray: Press the designated 'Spray keys' button on the remote control to activate the water spray function.
  • Cool Light Effect: Use the 'Lighting control' switch on the remote to turn on/off the integrated LED lights.
  • Alcoholic Induction (Water Sensor): The shark automatically activates when placed in water and deactivates when removed, eliminating the need for a manual power switch on the toy itself.
Image showing the RC shark spraying water from its top, indicating the one-click water spray feature.
Activate the one-click water spray for added fun.
Image of the RC shark with its LED lights illuminated, showcasing the cool light effect.
The RC shark features cool light effects.

7. Maintenance

  • Cleaning: After each use, rinse the shark with fresh water to remove any chlorine, salt, or debris. Wipe it dry with a soft cloth.
  • Battery Care: Always fully charge the battery before storage. If storing for extended periods, charge the battery every 3 months to maintain its health. Remove batteries from the remote control if not in use for a long time.
  • Waterproofing: Regularly inspect the rubber sealing ring around the battery compartment for any signs of wear or damage. Ensure it is clean and properly seated before each use to maintain waterproof integrity.
  • Propellers: Check propellers for any entanglement (e.g., hair, string) and carefully remove them to ensure smooth operation.

8. Troubleshooting

  • Shark does not move:
    • Ensure the shark is placed in water. The 'Alcoholic Induction' feature requires water contact to activate.
    • Check if the shark's battery is charged and correctly installed.
    • Check if the remote control batteries are installed correctly and have sufficient power.
    • Ensure the remote control and shark are properly paired. Try turning both off and on again with the shark in water.
  • Poor remote control range or interference:
    • Ensure you are within the 50-meter operating range.
    • Avoid operating near other 2.4Ghz devices that might cause interference.
    • Replace remote control batteries if they are low.
  • Water inside the battery compartment:
    • Immediately remove the battery and dry the compartment thoroughly.
    • Inspect the rubber sealing ring for damage or improper seating. Replace if necessary.
    • Do not use the shark until it is completely dry and the seal is confirmed to be intact.
  • Camera not working (if applicable):
    • Ensure the camera is properly connected and waterproofed.
    • Check your smartphone's Wi-Fi connection to the shark.
    • Restart the mobile app and the shark.

9. User Tips

  • Extra Batteries: For extended playtime, consider purchasing additional modular batteries. These are often available from the seller or compatible RC hobby stores.
  • Water Quality: While the shark is waterproof, operating it in clean, clear water will prolong its lifespan and ensure better camera footage (if applicable).
  • Signal Pairing: Remember that the shark needs to be in the water for the remote control to successfully pair due to its water induction activation.

10. Warranty and Support

This product typically comes with a 15-day warranty from the date of purchase. Please retain your proof of purchase for any warranty claims.

For technical support, spare parts, or further assistance, please contact the seller or manufacturer directly through their official channels. Refer to your purchase documentation for contact information.

© 2023 4DRC. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.