PUPUKOU FD-312

Contents

PUPUKOU Diamond Building Blocks Instruction Manual

Model: FD-312

1. Introduction

Thank you for choosing PUPUKOU Diamond Building Blocks. This manual provides essential information for the safe and proper use of your building block set. These micro-sized blocks are designed to foster creativity, fine motor skills, and imaginative play through various assembly methods.

2. Safety Information & Warnings

Important Safety Information:

  • Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
  • WARNING: Not suitable for children under 36 months due to small parts. Choking hazard.
  • Keep the product and its components out of reach of children under 3 years old.
  • Children should only use this product under adult supervision.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Keep plastic packaging bags away from children to avoid suffocation risk.
  • For DIY craft use only. Do not swallow or put into mouth and nose.

Ironing Safety (Adult Supervision Required):

  • Ironing must be operated by adults. Do not let children touch the hot iron or hot finished products to avoid scalding.
  • Please use low temperature and no steam mode for ironing. High temperature will cause bead deformation and damage.

3. Product Specifications

AttributeDetail
Product NamePUPUKOU beads
Model NumberFD-312
Batch/Serial NumberJH0608015
Block SizeMicro building block (approx. 8x8mm, 7mm height)
MaterialEVA (Environmental materials, non-toxic)
GenderUnisex
Recommended Age14+ years (Educational for younger children under adult supervision)
CertificationCE
Is ElectricNo Battery
High-concerned chemicalNone
OriginMainland China
Package Dimensions20cm (Length) x 15cm (Width) x 5cm (Height)
Package Weight0.38 kg

The blocks are available in a wide range of colors, including 20 common colors (Z01-Z20).

Chart displaying 20 common colors of diamond building blocks with their corresponding codes (Z01-Z20).

Chart displaying 20 common colors of diamond building blocks with their corresponding codes (Z01-Z20).

4. Package Contents

Your PUPUKOU Diamond Building Blocks set typically includes:

  • Assorted diamond building blocks (approx. 1120 pieces)
  • Storage box with compartments
  • Paper templates for design guidance
  • Tweezers
  • Ironing paper
Assorted Diamond Building Blocks in a Storage Box (Variant A)

Assorted Diamond Building Blocks in a Storage Box.

Individual bags of diamond building blocks in various colors.

Individual bags of diamond building blocks in various colors.

5. Setup & Assembly

The diamond building blocks offer various assembly methods, allowing for creative and intricate designs. They can be connected on all sides and stacked vertically.

Assembly Demonstration Video:

Video demonstrating the assembly process and creative possibilities of diamond building blocks, including connecting blocks and forming shapes.

Step-by-Step Instructions for Fused Designs:

  1. Prepare Tools: Place the template board flat. Position the matching paper template on the board and fix it well. Prepare your iron beads, tweezers, ironing paper, and a household low-temperature iron.
  2. Arrange Beads: Use the tweezers to carefully pick up beads and fill the pattern grid one by one according to your chosen design drawing. Ensure the entire pattern is filled tightly without any gaps.
  3. Cover with Ironing Paper: Lay one piece of special ironing paper evenly and completely over the finished bead pattern. Be careful not to shift the beads.
  4. Iron Gently: Adjust your iron to a low temperature setting and ensure the steam function is turned off. Iron back and forth slowly and evenly over the ironing paper until the beads melt and stick together firmly.
  5. Cool & Demold: Leave the work flat and allow it to cool down completely and naturally. Once fully hardened, gently peel off the ironing paper and carefully remove your finished craft.
Demonstration of various block assembly methods: connecting on all sides and stacking vertically.

Various assembly methods for the blocks, including side-by-side and vertical connections.

Examples of creations: numbers 0-10 and pixel art designs (bee, mushroom) made from diamond blocks.

Examples of creative designs, such as numbers and pixel art, made using the blocks.

Child playing with construction vehicle models (crane, bulldozer, excavator) built from diamond blocks.

Models of construction vehicles built from diamond blocks, showcasing creative potential.

Models of airplanes and a helicopter built using diamond blocks.

Models of airplanes and a helicopter built using diamond blocks.

6. Operating Instructions

The primary operation involves connecting the micro building blocks to create various 2D and 3D structures. The blocks are designed for easy interlocking, promoting fine motor skills and imaginative construction.

  • Free-form Building: Connect blocks directly to each other to build any shape or structure you can imagine.
  • Template-Guided Building: Use the provided paper templates as a guide to create specific designs.
  • Fusing Designs: For permanent 2D designs, follow the ironing steps outlined in the 'Setup & Assembly' section.
Close-up of a smooth block, emphasizing its design for safe handling without hurting hands.

Close-up of a smooth block, highlighting its design for safe handling.

Child playing with blocks, illustrating the development of fine motor skills, coordinated ability, communication, creativity, imagination, and cognitive ability.

Playing with these blocks can enhance fine motor skills, coordination, communication, creativity, imagination, and cognitive abilities.

7. Maintenance & Care

  • Cleaning: To clean the blocks, wipe them with a damp cloth. Do not use harsh chemicals or abrasive cleaners.
  • Storage: Store the blocks in their original box or a similar container to keep them organized and prevent loss. Keep them away from direct sunlight and extreme temperatures.
  • Handling: Handle the blocks gently to avoid damage. While durable, excessive force can cause breakage.

8. Troubleshooting

Blocks not sticking together after ironing:

If your blocks are not fusing properly after ironing, ensure the following:

  • The iron is set to a low temperature and steam is turned off.
  • You are applying even pressure across the entire design.
  • You are ironing slowly and thoroughly until the beads visibly melt and fuse.
  • The design is allowed to cool completely and naturally on a flat surface before attempting to peel off the ironing paper or demold. Premature handling can cause the design to fall apart.

9. User Tips

  • Patience is Key: These are micro blocks, requiring a bit more patience and precision than larger building blocks. Use the provided tweezers for easier handling.
  • Ironing Technique: For fused designs, practice on a small sample first to get a feel for the correct iron temperature and pressure. Ensure the ironing paper covers the entire design to prevent direct contact with the iron.
  • Creative Exploration: Don't limit yourself to templates. Experiment with different color combinations and block orientations to create unique 2D pixel art or 3D models.

10. Manufacturer Information

Manufacturer: Yiwu Cangtou E-commerce Co., Ltd, Room 101, No.1-1, Building 70, Jiangnan Fourth Community, Jiangdong Street, Yiwu City, Jinhua City, Zhejiang Province, Mainland China.

EU Authorized Representative: Humiss International B.V., Joop Geesinkweg 701, Amsterdam-Duivendrecht, the Netherlands.

11. Warranty & Support

For product support, inquiries, or to report any issues, please contact the seller or manufacturer directly. Please retain your purchase receipt as proof of purchase.

This product is intended for DIY craft use only. The manufacturer assumes no responsibility for any compliance or legal issues arising from misuse of the product.

A user manual (PDF) is available for further reference: View User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.