Introduction
This manual provides essential information for the installation, operation, and maintenance of your new Aramox UDQF6SH01 internal cooling fan, designed as a direct replacement for Sony PlayStation 2 (PS2) 50000 and 30000 series consoles. This fan is crucial for maintaining optimal operating temperatures within your console, preventing overheating and ensuring longevity.
Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture. This is an electrical component.
- Handle with care to avoid cuts or injuries, especially around the fan blades.
Package Contents
Please verify that all items are present and in good condition:
- 1 x Aramox UDQF6SH01 Internal Cooling Fan
Specifications
Figure 1: Aramox Internal Cooling Fan for Sony PS2 50000/30000.
| Feature | Detail |
|---|---|
| Model Number | UDQF6SH01 |
| Compatible Brand/Model | Sony PS2 PlayStation 2 (50000 / 30000 series) |
| Accessories Type | Cooling Systems |
| Material | ABS Plastic |
| Color | Black |
| Size | 7 x 6 x 1.5 cm (2.8 x 2.4 x 0.6 inches) |
| Voltage | DC 7V |
| Current | 0.21A |
| Blade Quantity | 9 blades |
| Approx. Package Weight | 33g |
| With USB | Yes (Refers to console's USB ports for power, not fan having a USB connector) |
Figure 2: Various angles of the Aramox Internal Cooling Fan.
Figure 3: Close-up of the fan's model label (UDQF6SH01, DC7V, 0.21A) and 2-pin connector.
Installation Instructions
This internal cooling fan is designed as a direct replacement for the original fan in compatible Sony PS2 consoles. While the installation process is straightforward, professional installation is always recommended due to the delicate nature of console internals.
- Preparation: Ensure your PS2 console is completely powered off and disconnected from all power sources and peripherals.
- Console Disassembly: Carefully open your PS2 console according to a reputable console repair guide specific to your PS2 50000 or 30000 series model. This typically involves removing screws and gently separating casing components.
- Locate Old Fan: Identify the existing internal cooling fan within the console.
- Disconnect Old Fan: Gently disconnect the old fan's power connector from the motherboard. Remove any screws or clips securing the old fan in place.
- Install New Fan: Position the new Aramox UDQF6SH01 cooling fan in the designated slot. Ensure it is oriented correctly. Secure it with the original screws or clips.
- Connect New Fan: Carefully connect the new fan's 2-pin power connector to the corresponding port on the motherboard. Ensure a snug and secure connection.
- Reassembly: Reassemble your PS2 console, ensuring all components are correctly seated and all screws are tightened appropriately. Do not overtighten.
- Testing: Reconnect your PS2 console to power and video. Power it on and verify that the new cooling fan operates correctly and quietly.
Note: No modification is required for installation; this is a direct replacement part.
Operation
The Aramox UDQF6SH01 internal cooling fan operates automatically when the Sony PS2 console is powered on. Its function is to draw heat away from the internal components, maintaining a safe operating temperature. No user intervention is required for its basic operation once correctly installed.
Maintenance
- Dust Removal: Periodically, and especially during any console disassembly, gently clean dust from the fan blades and surrounding vents using compressed air or a soft brush. Ensure the console is powered off and unplugged before cleaning.
- Keep Dry: Do not expose the fan or console to liquids or excessive moisture.
- Avoid Obstructions: Ensure the console's air vents are not blocked to allow for proper airflow.
Troubleshooting
- Fan is not spinning:
- Ensure the fan's power connector is securely attached to the motherboard. Verify that the console is receiving power and is turned on. If the issue persists, the fan or console's power circuit may be faulty.
- Fan is making unusual noise:
- Check for any obstructions (e.g., loose wires, dust buildup) that might be interfering with the fan blades. Ensure the fan is securely mounted and not vibrating against other components. If the noise is excessive and persistent, the fan may be defective.
- Console is still overheating:
- Ensure the fan is spinning correctly. Check for excessive dust buildup within the console's heatsinks and vents. Verify that the console is placed in a well-ventilated area. If the fan is new and working, other console components might be contributing to overheating.
User Tips
- This fan has been noted by users to work effectively in 'fat' PS2 models (50000/30000 series) and can provide quieter operation compared to older, worn-out fans.
- Consider this fan as a reliable replacement option, with many users reporting perfect functionality and satisfaction.
Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact the seller directly through your purchase platform. Please refer to the original product listing or your purchase documentation for specific warranty terms and conditions.
A generic user manual PDF is available for general guidance on product documentation. You can find it at: User Manual (PDF)