Introduction
Thank you for choosing the Y10-2X Intercom Helmet Bluetooth Headset. This device is engineered to provide high-definition sound quality, intelligent noise reduction, and reliable communication for motorcycle riders. Featuring Bluetooth 5.3 technology, it supports full 2-person intercom communication up to 500 meters and offers a long-lasting battery life, all within an IPX6 waterproof design. This manual will guide you through the setup, operation, and maintenance of your new headset.
Safety Information
- Read all instructions carefully before use.
- Always prioritize road safety. Do not operate the device in a way that distracts you from riding.
- Avoid exposing the device to extreme temperatures, direct sunlight, or open flames.
- Although the device is IPX6 waterproof, avoid prolonged immersion in water.
- Do not attempt to disassemble, repair, or modify the device. This will void the warranty and may cause damage.
- Keep out of reach of children.
Package Contents
Please check the package contents to ensure all items are present:
Diagram showing the Y10-2X main unit, speaker microphone, clip-on base, magic sticker installation pack, Type-C charging cable, and user manual.
- Y10-2X Main Unit (x1)
- Speaker Microphone (x1)
- Clip-on Base (x1)
- Magic Sticker Installation Pack (x1)
- Type-C Charging Cable (x1)
- User Manual (x1)
Product Overview
Familiarize yourself with the Y10-2X headset's components and controls:
Detailed diagram illustrating the function buttons and ports of the Y10-2X headset.
- Volume Up (+) / Next Track: Press to increase volume, long press for next track.
- AI Voice Key (Microphone Icon): Short press to activate the AI voice assistant.
- Volume Down (-) / Previous Track: Press to decrease volume, long press for previous track.
- M Button (Power On/Off / Play/Pause / Answer Key): Multi-function button for power, music control, and call management.
- Working Indicator Light (Green, Blue): Indicates device status.
- Charging Indicator Light (Red): Indicates charging status.
- Speaker/Mic Interface: Port for connecting the speaker and microphone.
- Charging Port: Type-C port for charging the device.
Setup
1. Installation
The Y10-2X features a split installation design for convenience and secure fitting.
Diagram showing the headset main unit detached from its clip-on base for easier installation and charging.
- Attach the clip-on base to the side of your helmet using the provided magic stickers or by sliding it onto the helmet edge. Ensure it is securely fastened.
- Insert the speaker microphone into the designated port on the main unit.
- Carefully route the speaker wires and microphone inside your helmet, positioning the speakers over your ears and the microphone near your mouth for optimal audio. Use the magic stickers to secure them.
- Once the speakers and microphone are in place, slide the main unit onto the installed clip-on base until it clicks securely.
2. Charging
Before first use, fully charge the headset.
- Connect the provided Type-C charging cable to the charging port on the headset and to a USB power source.
- The red charging indicator light will illuminate during charging.
- The light will turn off or change color (depending on model) when charging is complete.
- A 20-minute charge can provide approximately 3 hours of use. A full charge takes about 2.5 hours.
3. Bluetooth Pairing with Mobile Phone
- Ensure the headset is turned off.
- Press and hold the M button until the working indicator light flashes rapidly (usually alternating blue and red), indicating pairing mode.
- On your mobile phone, enable Bluetooth and search for available devices.
- Select "Y10-2X" from the list of devices.
- Once connected, the working indicator light will flash blue slowly.
- The headset supports simultaneous connection to two mobile phones.
4. Intercom Pairing (for 2-person communication)
The Y10-2X supports full 2-person intercom communication up to 500 meters.
Illustration of two riders communicating via intercom, demonstrating a range of 300m (actual range up to 500m).
- Ensure both Y10-2X headsets are powered on and not connected to any other Bluetooth devices.
- On one headset, long press the M button until it enters intercom pairing mode (indicator light may flash a specific pattern).
- On the second headset, repeat the same step.
- The headsets will automatically search for and connect to each other. Once connected, the indicator lights will show a steady blue or a specific intercom status.
Operating Instructions
Power On/Off
- Power On: Long press the M button until the indicator light turns on.
- Power Off: Long press the M button until the indicator light turns off.
Music Playback
- Play/Pause: Short press the M button.
- Next Track: Long press the Volume Up (+) button.
- Previous Track: Long press the Volume Down (-) button.
- Adjust Volume: Short press the Volume Up (+) or Volume Down (-) buttons.
Call Management
- Answer Call: Short press the M button when a call comes in.
- End Call: Short press the M button during a call.
- Reject Call: Long press the M button when a call comes in.
AI Voice Assistant
Image showing the voice key and examples of voice commands for various AI assistants like Siri and Xiao Ai.
- Activate Voice Assistant: Short press the AI Voice Key (microphone icon) to wake up your phone's AI voice assistant (e.g., Siri, Google Assistant, Xiao Ai).
- You can then use voice commands for navigation, music selection, making calls, and more.
Intercom Communication
- After successful intercom pairing, communication between two riders is automatic when within range.
- To temporarily disconnect intercom, short press the M button. To reconnect, short press the M button again.
Maintenance
- Cleaning: Wipe the headset with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not used for extended periods.
- Water Resistance: The Y10-2X is IPX6 waterproof, meaning it is protected against high-pressure water jets from any direction. It can withstand rain and splashes, but should not be submerged.
Image demonstrating the IPX6 dustproof and splashproof capabilities of the headset, suitable for various weather conditions.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Low battery. | Charge the device fully using the Type-C cable. |
| Cannot pair with phone. | Headset not in pairing mode; phone Bluetooth off; too many paired devices. | Ensure headset is in pairing mode (rapid flashing light). Turn phone Bluetooth off/on. Clear old Bluetooth connections on your phone. |
| No sound or poor sound quality. | Volume too low; speakers not positioned correctly; loose connection. | Adjust volume. Check speaker and microphone connections. Ensure speakers are directly over ears. |
| Intercom not connecting. | Out of range; not in intercom pairing mode; interference. | Ensure both units are within 500m. Re-enter intercom pairing mode on both devices. Move away from strong electromagnetic interference. |
Specifications
| Feature | Detail |
|---|---|
| Bluetooth Protocol | Bluetooth 5.3 |
| Bluetooth Transmission Range | Up to 20 meters |
| Intercom Range | Up to 500 meters (2-person full duplex) |
| Channel | Stereo |
| Chip Type | Domestic chip |
| Speaker Type | 40MM Graphene Diaphragm |
| Noise Reduction | Intelligent Multi-layer Noise Reduction |
| Playback Duration | Up to 32 hours |
| Standby Time | Up to 18 months |
| Charging Port | Type-C |
| Charging Time | Approx. 2.5 hours (20 min charge for 3 hours use) |
| Waterproof Level | IPX6 |
Visual representation of the Bluetooth 5.3 chip and key specifications.
Image highlighting the impressive battery life: 18 months standby, 32 hours continuous playback, and quick charge feature.
Detailed view of the 40MM Graphene Diaphragm speaker, emphasizing HIFI-level sound quality and dual microphone noise reduction.
Graphic illustrating the intelligent multi-layer noise reduction technology for clear calls.
User Tips
- Secure Installation: Always ensure the headset and its components are securely installed in your helmet before riding to prevent movement and ensure optimal sound and microphone performance.
- Pre-Ride Check: Before a long ride, quickly check the battery level and ensure your headset is fully charged to avoid interruptions.
- Practice Voice Commands: Familiarize yourself with the voice assistant commands in a safe, stationary environment before using them while riding.
- Optimal Microphone Placement: Position the microphone as close to your mouth as possible without obstructing your vision or comfort for the clearest communication.
Warranty and Support
The Y10-2X Intercom Helmet Bluetooth Headset is designed for durability and performance. For any issues or questions regarding your product, please contact the seller or manufacturer's customer support. Please retain your proof of purchase for warranty claims.
Product Video
Watch this video for a quick overview of the Y10-2X Intercom Helmet Bluetooth Headset's features and benefits.
Official product video showcasing features like split installation, AI voice assistant, Bluetooth 5.3, IPX6 waterproofing, long battery life, and dual phone connection.