Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Homatics DVB-T2 and DVB-S2 Tuners. These tuners are designed to extend the functionality of compatible Android TV Boxes, allowing reception of digital terrestrial (DVB-T2) and satellite (DVB-S2) television broadcasts.

A visual representation of the Homatics DVB-T2 and DVB-S2 tuners, showing their distinct labels.
Compatible Google TV Boxes include:
- HOMATICS Box R Lite 4K
- HOMATICS Box R 4K Plus
- RockTek G2
- KICKPI KP1

This image shows the DVB-T2 tuner connected to a Homatics Box R 4K Plus, illustrating a typical setup.
Setup Instructions
Follow these steps to connect and configure your DVB Tuner with your compatible Android TV Box:
- Connect the DVB Tuner: Plug the DVB Tuner into the Type-C Port of your Android TV Box.
- Power On: Connect the power supply to your TV Box and turn it on.
- Access Live TV App: Navigate to the "Apps" menu on your TV Box and select the "Live TV" application. Alternatively, press the "Live Guide" key on your remote control if available.
- Configure DVB Settings: Within the DVB Menu of the "Live TV" app, you can proceed to set up the parameters for your tuner. Refer to the specific connection steps below for DVB-T2 or DVB-S2 tuners.
DVB-T2 Tuner Connection Steps

This image illustrates the three main steps for setting up the DVB-T2 tuner:
- TV First Installation (Step 1): Select your Country/Region (e.g., Austria), First Audio Language (e.g., English), First Subtitle Language (e.g., English), Subtitle (OFF), and LCN (OFF). Click 'Next'.
- TV First Installation (Step 2): Select DVB Type (DVB-T), Antenna power (OFF), Scan Type (FTA - Free To Air), and Service Type (All). Click 'Scan'.
- Channel Search (Step 3): The system will display the channel search progress, showing Strength and Quality percentages, and listing found TV and Radio channels.
DVB-S2 Tuner Connection Steps

This image illustrates the four main steps for setting up the DVB-S2 tuner:
- TV First Installation (Step 1): Select your Country/Region (e.g., United States), First Audio Language (e.g., English), and First Subtitle Language (e.g., English). Click 'Scan'.
- Satellite Selection (Step 2): Choose the desired satellite(s) from the list (e.g., Bulgariasat 1 (1.9E), Eutelsat 3B & Rascom QAF 1R (3.0E Ku-band), etc.).
- Satellite Configuration (Step 3): Configure parameters for the selected satellite, including Search Mode (One TP), Transponder (e.g., 1/10 12188/H/30000), Scan Type (All), and Service Type (All). Click 'Scan'.
- Channel Search (Step 4): The system will display the channel search progress, showing Strength and Quality percentages, and listing found TV and Radio channels.
Operating Instructions
Once the DVB Tuner is connected and configured as per the setup instructions, you can begin watching digital terrestrial or satellite television. Use the "Live TV" application on your Android TV Box to browse channels, view program guides, and manage settings.
- Channel Navigation: Use your remote control's channel up/down buttons or the "Live TV" app interface to switch between channels.
- Program Guide: Access the Electronic Program Guide (EPG) through the "Live TV" app to see upcoming programs and schedule recordings if supported by your TV Box.
- Settings: Within the "Live TV" app's DVB menu, you can fine-tune settings such as antenna power, scan type, and service type, or perform new channel scans.
Maintenance
The Homatics DVB Tuner requires minimal maintenance. Keep the device clean and free from dust. Use a soft, dry cloth for cleaning. Avoid exposing the tuner to extreme temperatures, humidity, or direct sunlight. Ensure proper ventilation around your TV Box and tuner.
Troubleshooting
If you encounter issues with your DVB Tuner, consider the following common troubleshooting steps:
- No Signal:
- Check all cable connections, ensuring they are secure.
- Verify your antenna or satellite dish is correctly aligned and connected.
- Perform a new channel scan through the "Live TV" app.
- Ensure the DVB Tuner is firmly connected to the Type-C port of your TV Box.
- No Channels Found:
- Confirm that the correct DVB Type (DVB-T2 or DVB-S2) is selected in the settings.
- For DVB-S2, ensure the correct satellite is selected and transponder settings are accurate.
- Check your antenna/dish for obstructions or damage.
- Tuner Not Recognized:
- Ensure the TV Box is powered on and the tuner is properly inserted into the Type-C port.
- Restart your Android TV Box.
- Check if the "Live TV" app is updated to the latest version.
Specifications
| Feature | Detail |
|---|---|
| Product Type | Digital TV Tuner |
| Model Number | DVB-S2/DVB-T2 |
| Brand | HOMATICS (also compatible with MECOOL branded devices as per product properties) |
| Compatibility | Homatics Box R Lite 4K, Homatics Box R 4K Plus, RockTek G2, KICKPI KP1 Google TV Box |
| Interface | USB Type-C |
| Dimensions (Length x Width) | Approximately 66 mm x 16 mm |
| Weight | 0.05 kg (approx. 50 grams) |
| Package | Includes 1 x Tuner |
| Origin | Mainland China |

This image shows the approximate dimensions of the DVB-T2 tuner: 66mm in length and 16mm in width. Both black and white versions are depicted.

This image shows the approximate dimensions of the DVB-S2 tuner: 66mm in length and 16mm in width. Both black and white versions are depicted.
Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your Homatics Android TV Box or contact the manufacturer's customer service directly. Keep your purchase receipt for warranty claims.
User Tips
- Color Variation: Homatics DVB Tuners are available in both white and black colors. The performance of both colors is identical. The color shipped may depend on current stock availability.
- Firmware Updates: Ensure your Android TV Box's firmware and the "Live TV" application are kept up-to-date to ensure optimal performance and compatibility with the DVB Tuner.