BAOFENG UV-K61

Contents

Baofeng UV-K61 Multi-Band Walkie Talkie User Manual

Model: UV-K61 | Brand: BAOFENG

1. Introduction

Thank you for choosing the Baofeng UV-K61 Multi-Band Walkie Talkie. This high-performance, high-stability two-way radio is designed to provide reliable communication. To ensure you fully understand its features, operation, and maintenance, please read this manual carefully.

Main Features:

  • Broadband Walkie Talkie: Supports UV double segment, with frequency ranges including UHF 400-480MHz and VHF 136-174MHz.
  • DMO True2-Slot Dual Time Slot: Direct mode dual-slot communication allows two groups of calls at a frequency point simultaneously, enhancing communication efficiency and saving frequency resources.
  • Digital and Analog Compatible: Supports DMR digital and analog communication modes for smooth transition and diverse communication needs.
  • Digital Signaling Function: Offers rich calling modes (single call, group call, all call) and remote inhibit function.
  • SMS Function: Supports SMS, text editing, and drafting in 64 characters (Chinese and English).
  • High Sound Quality: Utilizes advanced AMBE+2TM voice processing technology.
  • Manual Writing-Frequency: Allows manual frequency input in frequency mode and software-based frequency setting.
  • High/Low Power Switch: Adjusts output power (5W/1W) to meet different call distance requirements and save energy.
  • Alarm Function: Supports general and silent alarms for emergency situations.
  • Customizable Side Buttons: Side buttons can be programmed for various functions.
  • NOAA Weather Channel Scanning: Receive weather channel alerts.
  • 1.44-inch LCD Screen: Multi-information display with Chinese and English menus.
  • Type-C Charging: Convenient charging method.
  • 999 Memory Channels: Ample storage for channels.
Baofeng UV-K61 Walkie Talkie with key features and frequency bands displayed on screen.
Front view of the Baofeng UV-K61 with its key features and supported frequency bands.
List of powerful functions for the Baofeng UV-K61 walkie talkie.
Detailed list of powerful functions including UV full frequency band, AM aviation band, NOAA weather forecast, and 999 memory channels.

2. Setup

2.1. Package Contents

Before starting, please verify that all items are present in your package:

  • Host (Walkie Talkie Unit)
  • Antenna
  • Battery
  • Back Clip
  • Charger (Base Charger and Type-C Charger)
  • User Manual (this document)
  • Lanyard
  • Bracelet (optional accessory)
Image showing the package contents of the Baofeng UV-K61 walkie talkie.
Typical package contents for the UV-K61 walkie talkie.

2.2. Charging the Battery

Ensure the product is OFF when charging. The battery may show a red flashing light initially if deeply discharged; this is a normal pre-charge process and should turn to a solid red light within 30 seconds.

  1. Plug the power adapter into a power outlet.
  2. Plug the other end of the power adapter into the socket on the back of the charging cradle.
  3. Insert the battery or the battery-equipped product into the charging cradle correctly.

The indicator light on the charging cradle shows the charging status:

  • Red light: In charging
  • Green light: Charging is completed

Note: For best battery performance, charge for a minimum of 4 hours on the first charge.

Image illustrating Type-C charging for large capacity lithium batteries.
The UV-K61 supports convenient Type-C charging for its large capacity lithium batteries.

2.3. Battery Information and Safety

First Use: The battery is not fully charged at the factory. For the first three uses, charge the new battery for 4 hours. When battery power is low, recharge it.

Suitable Battery Type: Use only the specified battery for charging to avoid explosion or injury.

Battery Safety Attention:

  • Do not allow metal contacts (coins, keys, jewelry) to touch battery contacts to prevent short circuits, discharge, heat, or leakage.
  • Do not short-circuit battery terminals or discard batteries in fire. Do not disassemble the battery pack. Dispose of batteries in a dedicated recycling box.

Normal Operation Instructions:

  • Charge the battery indoors, at room temperature.
  • The charger indicator turns from red to green when fully charged.
  • You can charge with the battery installed in the walkie-talkie, but it is best to turn off the walkie-talkie during charging for a full charge.
  • Do not charge the battery when its power is not used up, as this shortens battery life.
  • Do not put a fully charged battery back on the charger to "power up" again, as this significantly reduces its cycle life.

Extend Battery Life:

  • Battery performance reduces below -20°C. Use backup batteries in colder weather.
  • Wipe battery contacts with a clean, dry cloth before inserting batteries into the walkie-talkie.

Battery Storage:

  • Fully charge the battery before long-term storage to prevent over-discharge.
  • Remove the battery and recharge every 6 months during storage.
  • Store the battery at room temperature in a cool, dry place to minimize self-discharge.

2.4. Accessories Installation

  1. Install/Remove the Antenna: Turn off the radio. Insert the antenna into the mounting hole and turn clockwise to install. Turn counterclockwise to remove. Do not shake the top of the antenna by hand.
  2. Install/Remove the Battery: Align the battery with the holder on the back, push firmly, and slide up until it locks. To remove, slide the latch to the unlocked position and slide the battery downward.
  3. Install/Remove the Belt Clip: Unscrew the two screws on the battery. Align the belt clip screw holes with the battery screw holes and tighten.
  4. Install External Headphones/Microphone (Optional): Open the headset cover and plug the headset into the jack. Cover the jack when not in use.

2.5. Description of Buttons and LCD Icons

Diagram showing function key analysis and components of the Baofeng UV-K61 walkie talkie.
Detailed diagram of the UV-K61's function keys and components.
Button Descriptions
ButtonDescription
[PTT] Transmit buttonSwitches between transmission and reception. Press and speak to microphone; release to receive.
Side button 1Short press: Quickly switch upper/lower screen. Press and hold: Enter/exit alarm mode.
Side button 2Short press: Shortcut select channel up. Press and hold: Turn on monitor function (analog channels only).
Side button 3Short press: Shortcut select channel down. Long press: Power switch, select high/low power.
0-9 number buttonsDTMF function code words. Select punctuation/letters in Pinyin input. Numeric shortcut function.
[MENU] buttonActivates menu mode, enters menu, selects menu items. Press and hold: Enters radio settings.
[Up Arrow] buttonMove up; change scanning direction; move left in SMS editing.
[Down Arrow] buttonMove down; change scanning direction; move right in SMS editing.
[Exit]/[Clear] buttonClears entered information. Press and hold: Switch channel mode or frequency mode.
[*] buttonPress and hold: Lock/unlock keyboard. Code word * in DTMF function.
[#] buttonSwitch input method. Code word # in DTMF function.

Programmable Buttons: SK1, SK2, SK3, P1, and P2 keys can be programmed for various functions to improve operational convenience. Consult your dealer for specific functions.

LCD Icon Descriptions
Icon NameIconDescription
Signal strengthMore bars indicate stronger signal.
Transmission powerH (High), M (Medium), L (Low)Indicates current channel transmission power.
Speaker iconSpeaker is enabled, reception is effective.
Relay mode iconIndicates current transmission frequency with a frequency bias.
Scan iconCurrently in offline state or scan is on in normal mode.
Battery powerMore bars indicate more battery power.
Pointer iconPoints to main digital mode; press A/B to switch main channel.

LED Indicators:

  • Red on: Transmitting
  • Green on: Receiving
  • Green flash: Scanning

3. Operating Instructions

3.1. Basic Operation

Power On/Off: Turn the [Power Switch / Volume Control] knob clockwise until you hear a "click" and a short beep to power on. Turn counter-clockwise until a "click" to power off.

Volume Adjustment: Turn the [Power Switch / Volume Control] knob clockwise to increase volume, counter-clockwise to decrease. The LCD displays the volume bar.

Region Selection: Regions are channel groups with similar attributes. The UV-K61 supports up to 250 regions, each with up to 64 channels. Select a region via the menu (MENU -> Region -> Region list) or a programmed shortcut button.

Adding a Region: Go to Menu -> Area -> New Area, press [MENU], input the region name, then press [MENU] to save.

Digital and Analog Channel Switch: Channels can be configured as digital or analog. Switch between them if the current region contains both.

3.2. VFO Frequency Mode

In frequency mode, long press [BACK] on the standby interface. 'V' on the screen indicates manual input frequency mode. You can manually input frequencies and specify transmission frequencies.

Setting Frequency Mode: Menu -> Settings -> Walkie talkie Settings -> Mode -> Frequency Mode, then press [MENU].

Frequency Selection: Use [Up Arrow] or [Down Arrow] keys, or directly enter the frequency using the numeric keypad (e.g., MHZ for first three digits, KHZ for fifth digit after decimal point).

3.3. Single/Dual Band Mode

When the radio is on standby, press [Up Arrow]/[Down Arrow] to switch between primary and secondary channels. The black pointer indicates the primary channel. Press [BACK] to switch between dual band single standby or dual band dual standby.

3.4. Making and Receiving Calls

Receiving and Replying to Group Calls:

  1. The LED indicator will be green.
  2. The screen displays status icons (RSSI), group alias, caller ID, and group call icon.
  3. Hold the walkie talkie upright, 1-2 inches (2.5-5.0 cm) from your mouth.
  4. Press [PTT] to reply (LED red).
  5. Release [PTT] to answer.

Receiving and Replying to Single Calls:

  1. The LED indicator will be green.
  2. The screen displays status icons (RSSI), user alias/ID, and one-way icon.
  3. Hold the walkie talkie upright, 1-2 inches (2.5-5.0 cm) from your mouth.
  4. Press [PTT] to reply (LED red).
  5. Release [PTT] to answer.

Receiving All Calls:

  1. The LED indicator will be green.
  2. The screen displays status icons (RSSI), "All call", user alias/ID, and all call icon.
  3. After termination, the walkie talkie returns to the screen before receiving the call. You cannot reply to all calls.

Starting a Walkie-Talkie Call: Choose a channel, user ID, or talk group via the channel knob, pre-programmed one-touch call button, address book list, or manual dialing.

Initiating Group Call:

  1. Rotate the channel knob to select the channel using the active talk group alias or ID.
  2. Hold the walkie talkie upright, 1-2 inches (2.5-5.0 cm) from your mouth.
  3. Press [PTT] to initiate a call (LED red). The screen displays talk group alias/ID and group call icon.
  4. Release [PTT] to answer.

Initiating Single Call:

  1. Rotate the channel knob to select the channel using the active user alias or ID.
  2. Hold the walkie talkie upright, 1-2 inches (2.5-5.0 cm) from your mouth.
  3. Press [PTT] to initiate a call (LED red). The screen displays status icons (RSSI), single call, user alias/ID, and one-way icon.
  4. Release [PTT] to answer.

Initiating All Call:

  1. Rotate the channel knob to select the channel using the active full call group alias or ID.
  2. Hold the walkie talkie upright, 1-2 inches (2.5-5.0 cm) from your mouth.
  3. Press [PTT] to initiate a call (LED red). The screen displays all-call group alias/ID and all-call icon.

Note: Channel users cannot reply to all calls.

One-Touch Call Button: Programmed for group or single calls to predefined aliases/IDs. Assign one alias/ID per one-touch call key.

Analog Channel Call: On an analog channel, hold [PTT] and speak to transmit. Release [PTT] to receive.

DTMF Call:

  • Make a call: Under analog channel, press and hold [PTT] and keypad number key. Or long press [#] to switch to manual dialing mode, enter number, short press [PTT].
  • Receive calls: If DTMF is configured as the receiving signaling system, decoding is successful when the code word is DTMF personal ID.

PTT ID Call: In analog mode, program the radio to configure DTMF on-line and off-line codes. When enabled, the code is sent each time [PTT] is pressed and released.

3.5. Emergency Alarm Function

In an emergency, use this feature to ask for help. Emergency alarm has the highest priority.

Exiting Alarm Mode:

  • Turn off the radio.
  • Temporarily exit on the current channel; reselecting the channel will continue the alarm.

Alarm Types:

  • Disable: Alarm function off, but can receive alerts.
  • Conventional: Audible and visual prompt.
  • Silent: No audible/visual prompt.
  • Silence with voice: No audible/visual prompt, but sounds when [PTT] is pressed.

Alarm Modes (Conventional example):

  • Emergency alarm: Press and hold [Emergency mode on] to send alarm tone, no voice.
  • Emergency alarm and call: Press and hold [Emergency mode on], then [PTT] to speak.
  • Emergency alarm voice: Press and hold [Emergency mode on] to enter alarm and transmission channel, automatically activates "emergency microphone".

Receiving Emergency Alert:

  1. Number of alerts received, alternating with sender's alias/ID.
  2. Beep sounds, LED flashes red.
  3. Transceiver automatically acknowledges alert.

Replying to Emergency Alert:

  1. Press any key to stop audible alerts.
  2. Hold walkie talkie upright, 1-2 inches (2.5-5.0 cm) from mouth.
  3. Press [PTT] to start emergency call (LED red).
  4. Release [PTT] to answer.

Sending Emergency Alert:

  1. Press preprogrammed alarm on button.
  2. Screen displays "Send Alert", alternating with walkie talkie ID. LED red.
  3. Emergency call tone sounds, LED flashes green upon confirmation.

Sending Emergency Alert with Voice Follow:

  1. Press preprogrammed alarm on button.
  2. Screen displays "Send Alert", alternating with walkie talkie ID. LED red.
  3. Emergency call tone sounds, LED flashes green upon confirmation.
  4. Hold walkie talkie upright, 1-2 inches (2.5-5.0 cm) from mouth.
  5. Press [PTT] to initiate call (LED red).
  6. Release [PTT] to answer.

Restart Emergency Mode: Occurs if transceiver changes channel in emergency mode, or if alarm key is pressed during transmit state.

Exit Emergency Mode: Occurs upon receiving confirmation, reaching max attempts, pressing Alarm Off, or pressing [PTT].

3.6. SMS Function

The UV-K61 supports DMR data function for sending and receiving messages up to 144 characters (50 lines).

Edit and Send Messages:

  1. Menu -> SMS -> Write SMS.
  2. Input SMS using keyboard. Use [Up Arrow]/[Down Arrow] to move cursor. [BACK] to delete.
  3. Press [MENU] to send or save.
  4. Select recipient alias/ID.
  5. LCD shows SMS being sent.

Send Prefabricated SMS: Supports up to 50 prefabricated SMS. Edit before sending.

  1. Menu -> SMS -> Prefabricated SMS.
  2. Select desired SMS.
  3. Edit if needed.
  4. Press [MENU] to send or save.
  5. Select recipient alias/ID.

Manage Failed SMS: In the re-send selection screen, options include Re-send, Forward, Edit.

Receive SMS: When receiving, screen displays sender's alias/ID and text message icon. Options: Read, Read later, Delete.

Read SMS in Inbox: Menu -> SMS -> Inbox -> Read SMS.

Reply SMS in Inbox: Menu -> SMS -> Inbox -> Reply. Edit message, then send.

Delete SMS in Inbox: Menu -> SMS -> Inbox -> Delete.

Delete All SMS in Inbox: Menu -> SMS -> Inbox -> Delete All.

3.7. Encryption

Basic Encryption: Prevents unauthorized eavesdropping. Both radios must have the same "Encryption Key". If keys differ, you will hear chaotic transmission sound. Press pre-programmed Encryption button to turn on/off.

ANI ID Code Display: In Analog mode, PTT ID can be set via software. LCD displays ANI ID code when receiving DTMF signal.

Confidentiality (Remote Kill/Activation): Allows remote kill or activation of radios. Limited to active functions.

Remote Kill: Menu -> Contact list -> Radio remote kill. Select alias/ID, then press [MENU]. LCD shows "radio remote kill".

Radio Activation: Menu -> Contact list -> Radio activation. Select alias/ID, then press [MENU]. LCD shows "radio activated".

3.8. Scan Function

The scan function helps monitor communication activity on other channels/groups. Supports up to 250 scan lists, each with 32 members (analog/digital mix).

Read Scan List: Menu -> Scan -> Read list. View members in the list.

Add Scan Channel: Menu -> Scan -> Add channel. Select channel, then press [MENU].

Scan Instruction and Method: The radio checks for voice activity on channels in the scan list. Red LED flashes, scan icon appears. During duplex mode scan, if a digital channel locks an analog channel, it switches to analog mode.

Ways to Scan:

  • Manual Scan: Start via pre-programmed scan button or menu.
  • Automatic Scan: Starts automatically when an activated channel/group is selected.

Start and Stop Scan: Use pre-programmed scan button or Menu -> Scan. Select "open" to start, "close" to stop.

Scan Reply: During scan, the radio stops at active channels/groups. Press [PTT] to reply, release to receive. If no response, scanning resumes.

3.9. Menu Settings

Access menu via [MENU] button. Use [Up Arrow]/[Down Arrow] to navigate, [MENU] to select/confirm, [BACK] to return.

Radio Settings:

  • Tone/Prompt Tone: Enable/disable all tones (except emergency), call permission, keyboard tones.
  • Keyboard Sound: Enable/disable keyboard sounds.
  • Set Power Level: Adjust transmission power (High/Medium/Low).
  • Control Screen Backlight: Turn on/off backlight, set duration (5S, 10S, 15S, Normally on, Always on).
  • Set Noise Reduction Level (Squelch): Adjust squelch level (Normal/Strict) to filter unwanted calls/noise.
  • Open or Close Boot Screen: Enable/disable boot screen display.
  • Lock/Unlock Key: Manual or automatic lock (5S, 10S, 15S). Long press [*] to lock/unlock.
  • Language Selection: Choose English or Chinese.
  • Turn LED On/Off: Enable/disable LED indicator light.
  • Turn VOX Function On/Off: Enable/disable voice-activated transmission. Set sensitivity via software.
  • Power On Password: Set an 8-bit power-on password.
  • Clock: Set Time, Date, Time Zone.
  • VFO/MR Mode: Switch between Channel mode and Frequency mode.

3.10. Radio Information Query

Check Radio ID: Menu -> Radio number. Displays radio ID and name.

Check Radio Version: Menu -> Radio information -> Radio version. Displays firmware and CPS version.

3.11. Radio Configuration

Menu -> Settings -> Radio configuration. Input password (if set) to access.

  • Receiving Frequency: Set receiving frequency.
  • Transmitting Frequency: Set transmitting frequency.
  • Channel Name: Edit channel name.
  • Time-out Timer: Set continuous transmission time limit (15S, 30S, etc.).
  • CTCSS: Set CTCSS encode/decode for analog channels.
  • Color Code: Set color code (0-15) for digital channels.
  • Relay Station Time Slot: Set time slot for digital channels.
  • VOX: Adjust VOX sensitivity.
  • Transmitting Contacts: Modify transmitting contacts for digital channels.
  • Group Call List: Modify group call list for digital channels.

4. Specifications

FeatureSpecification
Brand NameBAOFENG
Model NumberK61
Frequency RangeVHF: 136-174MHz, UHF: 400-480MHz (Dual band)
Receiving FrequencyFM65-108MHz, AM108-136MHz, VHF136-174MHz, 200-260MHz, UHF350-390MHz, 400-600MHz
Transmission Frequency136-174MHz, 220-260MHz, 400-480MHz
Output Power (W)5W-10W (High: 5W, Low: 1W)
Maximum Range5km-10km
Storage Channel999
Battery Capacity (mAh)2600
Battery IncludedYes
Waterproof / Water-ResistantNo
Is_DisplayYes
Walkie Talkie TypePortable
Operating Temperature-30°C ~ +60°C
Operating VoltageDC 7.4V
Dimensions133*62*36mm (excluding antenna)
Weight0.6 kg (Product package weight)
Vocoder TypeAMBE+2TM
Digital ProtocolETSI-TS102 361-1,-2,-3
Image showing the basic product parameters and dimensions of the Baofeng UV-K61.
Basic product dimensions: 12.2cm height, 6.3cm width, 3.3cm depth.

5. Troubleshooting

If you encounter issues with your Baofeng UV-K61, please refer to the table below for common problems and solutions. If the problem persists, contact customer support.

ProblemReasonSolution
The radio doesn't start.Battery not installed correctly.
Battery runs out.
Poor battery contact (damaged or dirty).
Remove and re-install the battery.
Charge or change to a new battery.
Clean contacts. Contact distributor if issue persists.
Sound is small/intermittent, or no sound when receiving.Battery voltage low.
Voice too small.
Antenna loose.
Speaker damaged or dirty.
Charge or change to a new battery.
Turn up the sound.
Turn off and re-install the antenna.
Clean speaker. Contact distributor if issue persists.
Cannot talk with other members in the same group.Frequency difference.
Different digital or analog channels.
Too far away.
Reset to the same frequency.
Correct to the same channel.
Get closer to each other.
Single call or group call does not work in digital channel.Different frequency/channel/color code/time slot.Set to the same frequency/channel/color code/time slot.
Other sound in the channel, which is not from members.Interference from the same frequency.
Signal not set yet.
Change to new frequency, or correct the squelch.
Set the signal for all radios in the group.
The loud noise.Too far away from other members.
Poor location (blocked by buildings, basement).
Interference from environment or electromagnetic.
Get closer to other members.
Move to open environment, restart the radio.
Avoid device interfering with radio.

6. Maintenance

To maintain performance and extend the service life of your walkie talkie, follow these guidelines:

6.1. General Maintenance

  • Do not store the radio in environments containing corrosive electronic circuit materials.
  • Do not directly lift the antenna or external microphone.
  • Cover appendage interface covers when attachments are not used.

6.2. Cleaning

  • Use a clean, dry cloth or brush to wipe off the surface and dust from the charging pole regularly.
  • Wipe dirt with a lint-free cloth to prevent poor contact.
  • For dirty buttons, control knobs, and chassis, use a neutral detergent (not corrosive chemicals) and a wet cloth. Ensure the radio is completely dry before use.
  • When not in use, attach the cover on the socket.

Caution: Always turn off the radio and remove the battery before cleaning.

7. User Tips

  • Range Optimization: For maximum range, ensure your antenna is securely attached and you are in an open environment with minimal obstructions. The stated 5-10km range is under ideal conditions.
  • Battery Management: To prolong battery life, avoid overcharging and deep discharging. Store the battery properly when not in use.
  • Frequency Matching: Utilize the one-click frequency matching feature for quick and easy setup with other compatible devices.
  • NOAA Weather Alerts: Keep the NOAA weather channel scanning active, especially during outdoor activities, to receive timely weather alerts.

8. Warranty and Support

This product is intended for professional applications. For detailed warranty information, service, and support, please refer to the official user manual PDF available at: Baofeng UV-K61 User Manual (PDF).

All specifications may be modified without prior notice or liability. For further assistance, please contact your local distributor or refer to the manufacturer's website.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.