1. Introduction and Overview
This manual provides detailed instructions for the installation and operation of your Wireless CarPlay Android Auto Module, designed specifically for Mercedes-Benz vehicles equipped with the NTG4.5 system. This module upgrades your vehicle's infotainment system to support modern smartphone integration, offering a smarter and safer driving experience.
The module is a plug-and-play solution, ensuring easy installation and a perfect fit with your original car kit. It supports both wireless and wired CarPlay and Android Auto, along with MirrorLink and USB media playback. Advanced connectivity is provided through built-in 2.4G and 5.8G WiFi and Bluetooth 5.0 technology. You can control the system using your car's original steering wheel controls, OEM knob, touch screen (if applicable), and voice commands like "Hey Siri...". GPS navigation apps such as Google Maps, Waze, and Apple Maps are fully supported with live traffic information. The system allows seamless switching between the CarPlay display and your factory controls at any time.

2. Compatibility
This module is compatible with Mercedes-Benz vehicles featuring the NTG4.5 system. It is crucial to confirm your vehicle has a Harman Becker port for installation. The module is suitable for the following Mercedes-Benz models from 2011-2016, provided they have the NTG4.5 system with a Becker Navi-Dock:
- 2012-2015 A-Class
- 2011-2015 B-Class
- 2011-2014 C-Class
- 2012-2012 CLA
- 2012-2014 CLS-Class
- 2012-2015 E-Class
- 2012-2015 GLA
- 2012-2015 GLK
- 2011-2016 ML/GL
- 2011-2015 SLK
Important: Even if your model is listed, you must confirm the presence of a HARMAN BECKER slot in your vehicle before installation.
Identifying NTG4.5 System
To determine if your Mercedes-Benz (2011-2015) has an NTG4.5 system, check for a HARMAN BECKER slot in the glove box on the passenger side. NTG4.5 systems typically have this slot, whereas NTG4.7 systems do not. Additionally, the LVDS port for NTG4.5 is identifiable as shown in the diagram below.


3. Features
- Wireless & Wired Connectivity: Supports both wireless and wired Apple CarPlay and Android Auto.
- MirrorLink: Allows mirroring of your smartphone screen to the car's display.
- Bluetooth 5.0: Provides a wider transmission distance and enhanced compatibility for a better user experience.
- Built-in 2.4G & 5.8G WiFi: Ensures faster transmission speeds and a more stable connection.
- USB Expansion: Connect mobile phones, USB disks, and facilitate software upgrades via the USB port.
- Original Car Control Integration: Retains full functionality of original car controls including steering wheel buttons, OEM knob, and touch screen (if equipped).
- Voice Control: Activate voice assistants like Siri with commands such as "Hey Siri...".
- Navigation Apps: Full support for GPS navigation applications like Google Maps, Waze, and Apple Maps with live traffic information.
- Optional Camera Functions:
- Supports factory original reverse camera and parking radar.
- Supports aftermarket reverse camera and 360-degree camera (optional).
- Supports front view camera and DVR with CVBS input (optional).







4. Setup and Installation
The module is designed for a plug-and-play installation, requiring no complex wiring or modifications to your vehicle's existing system. Ensure your vehicle is turned off and the battery is disconnected before beginning installation.
Installation Steps:
- Locate Harman Becker Slot: Identify the Harman Becker slot, typically found in the glove box on the passenger side.
- Insert Module: Simply align the module with the Harman Becker socket and plug it in firmly.
- Connect Expansion Interfaces (Optional):
- AUX Connection: Connect the provided RCA cables to your original car's AUX input.
- Reversing Video Input: If installing an aftermarket reversing camera, connect its video output to the yellow RCA input.
- Power Connection: Connect the 12V+ ACC (red wire) to an appropriate power source.
- USB Expansion: The USB port can be used for connecting mobile phones, USB disks, or for future software upgrades.
Note: The module features DIP switches. Dial 1 is used to turn on/off the audio Bluetooth. Dial 2 is invalid and should not be adjusted.



5. Operating Instructions
Connecting Your Smartphone
- After installing the module, turn on your vehicle's ignition.
- On your smartphone, enable Bluetooth and Wi-Fi.
- The module will automatically connect to your smartphone for wireless CarPlay or Android Auto.
Selecting Sound Output
For audio playback, you have two options:
- Wireless Connection (Bluetooth Audio): If using wireless CarPlay/Android Auto, you need to connect your device's Bluetooth with your original car system. The sound will be routed via the Bluetooth audio source.
- Wired Connection (AUX Audio): If using wired CarPlay/Android Auto, select the AUX audio source on your original car system.
Bluetooth Audio Setup for Wireless CarPlay/Android Auto
- Open the Bluetooth audio settings of your original car host.
- Select "Connect via BT audio device" and wait for the Bluetooth connection.
- When the screen prompts "Do you want to authorise BT-Transmitter?", select "Yes".
- After the screen reminds you to match the Bluetooth, select "Yes" again to confirm the passkey.

Using Car Controls
The module integrates seamlessly with your vehicle's existing controls:
- Steering Wheel Controls: Use your steering wheel buttons to navigate menus, adjust volume, and control playback.
- OEM Knob Control: The original equipment manufacturer (OEM) knob can be used for menu selection and navigation.
- Touch Screen Control: If your vehicle is equipped with a touch screen, you can interact directly with the CarPlay/Android Auto interface.
- Voice Control: Activate your smartphone's voice assistant (e.g., Siri) by saying "Hey Siri..." to make calls, send messages, get directions, and more.
Switching Between Displays
You can switch between the CarPlay/Android Auto display and your car's original factory infotainment system at any time using the factory controls.
6. Maintenance
To ensure optimal performance and longevity of your Wireless CarPlay Android Auto Module, follow these general maintenance guidelines:
- Keep Clean: Regularly wipe the module and surrounding areas with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Avoid Moisture: Protect the module from water, excessive humidity, and extreme temperatures.
- Secure Connections: Periodically check that all connections (Harman Becker slot, AUX, USB) are secure and free from debris.
- Software Updates: Check the manufacturer's website or contact support for any available software updates. Updates can be performed via the USB expansion port.
7. Troubleshooting
If you encounter issues with your module, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Module does not power on or function. | Incorrect installation, loose connection, incompatible system. | Ensure the module is correctly plugged into the Harman Becker slot. Verify the 12V+ ACC wire is properly connected. Confirm your vehicle has an NTG4.5 system with a Harman Becker port. |
| No audio output. | Incorrect audio source selected, Bluetooth not connected, AUX cable loose. | Check if the car's audio source is set to AUX or the correct Bluetooth audio device. Ensure your phone is properly connected via Bluetooth to the module and the car system. Verify AUX cable connection. Check DIP switch 1 is set correctly for Bluetooth audio. |
| Wireless CarPlay/Android Auto not connecting. | Wi-Fi or Bluetooth issues, phone settings. | Ensure Wi-Fi and Bluetooth are enabled on your smartphone. Restart your phone and the car's infotainment system. Forget and re-pair the Bluetooth connection. |
| Screen mirroring (MirrorLink) not working. | App compatibility, phone settings. | Ensure your smartphone supports MirrorLink and the necessary apps are installed. Check phone settings for screen mirroring permissions. |
| Original car controls not responding. | Module not fully integrated, software glitch. | Ensure the module is securely connected. Try restarting the car's infotainment system. If the issue persists, contact technical support. |
8. Specifications
| Feature | Specification |
|---|---|
| Dimensions (L x W x H) | 80mm x 80mm x 23mm |
| Compatibility | Mercedes-Benz NTG4.5 Systems with Harman Becker slot |
| Wireless Connectivity | 2.4G & 5.8G WiFi, Bluetooth 5.0 |
| Supported Functions | Wireless/Wired CarPlay, Android Auto, MirrorLink, USB Media Playback |
| Control Methods | Original Steering Wheel Controls, OEM Knob, Touch Screen (if applicable), Voice Control (Siri) |
| Input Ports | Harman Becker Slot, 12V+ ACC |
| Output Ports | AUX Audio, Reversing Video Input (RCA) |
| Expansion | USB port for mobile phone connection, USB disk, software upgrades |
| Optional Camera Support | Factory reverse, aftermarket reverse, 360 camera, front view camera, DVR (with CVBS input) |
9. User Tips
- Verify Compatibility Carefully: Before purchasing or installing, double-check that your Mercedes-Benz model (e.g., 2013 GLK350) has the NTG4.5 system and specifically the HARMAN BECKER slot. This is the most critical step for successful installation and operation.
- Audio Source Selection: Remember to switch your car's audio input to AUX or the correct Bluetooth audio device to hear sound from CarPlay/Android Auto.
- Firmware Updates: Periodically check for firmware updates from Ezonetronics to ensure you have the latest features and bug fixes. Updates can often improve performance and compatibility.
- Cable Management: During installation, ensure all cables are neatly routed and secured to prevent interference or damage.
10. Warranty and Support
This product comes with a standard manufacturer's warranty. For specific warranty terms, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact Ezonetronics customer service directly. Keep your proof of purchase for warranty claims.