1. Introduction
The Veinasa XS-RS01 is a precision tipping bucket rain gauge designed for hydrological and meteorological monitoring. It accurately measures natural rainfall and converts it into digital information output, facilitating data transmission, processing, recording, and display. This instrument is composed of rain-bearing parts and metering components, utilizing a dump mechanical bistable weighing mechanism for reliable operation. It offers high precision, good stability, and strong anti-interference ability.
2. Setup and Installation
2.1 Unpacking and Inspection
- Carefully unpack the rain gauge and inspect all components for any signs of damage during transit.
- Ensure all parts listed in the packing list are present.
2.2 Physical Installation
- The instrument's tipping bucket tilt angle is pre-adjusted and locked at the factory. No secondary debugging is required. Do not attempt to adjust the tilt adjustment screw on site.
- Install the tipper mechanism into the main body.
- Place the rain gauge on a stable, level surface. The chassis is equipped with a horizontal bubble for precise level calibration. Adjust the base using the three sets of external leveling bolts until the bubble is centered.
- Ensure the installation site is free from obstructions that could affect rainfall collection (e.g., trees, buildings).
2.3 Electrical Connection
The XS-RS01 supports various output signals. Refer to the specifications for detailed wiring based on your chosen output type. Ensure correct power supply voltage is provided.
- Pulse Signal: One pulse represents 0.1mm, 0.2mm, or 0.5mm of rainfall (depending on model). Power supply: 5-24V DC.
- RS485 Signal: Standard Modbus-RTU protocol. Device default address: 01. Power supply: 5-24V DC.
- Voltage Signal (0-2V, 0-5V, 0-10V): Choose one. Power supply: 5-24V DC for 0-2V; 12-24V DC for 0-5V/0-10V.
- Current Loop (4-20mA): Power supply: 12-24V DC.
- SDI-12: Power supply: 5-24V DC.
For integration with data loggers or microcontrollers (e.g., Arduino), connect the appropriate output wires to the input pins of your device. The video below demonstrates the internal mechanism and testing with an Arduino setup.
Video 1: Demonstration of the tipping bucket mechanism, showing how it converts rainfall into digital information output, and a test with an Arduino setup displaying rainfall data.
3. Operation
The XS-RS01 operates by collecting rainfall in its rain inlet. As water accumulates, it fills one side of the tipping bucket. Once a specific volume is reached (determined by the resolution, e.g., 0.1mm), the bucket tips, emptying the water and simultaneously triggering a switch or generating a signal. This tipping action is recorded, and the process repeats.
3.1 Rainfall Measurement
- The rain gauge continuously measures rainfall.
- The collected data can be used to derive various rainfall parameters:
- Instantaneous rainfall
- Yesterday's rainfall
- Total rainfall
- Hourly rainfall
- Rainfall in the last hour
- Maximum rainfall in 24 hours
- 24-hour period of maximum rainfall
- 24-hour minimum rainfall
- 24-hour period of minimum rainfall
- Rainfall on the day
3.2 Data Output and Monitoring
The XS-RS01 offers multiple output methods to integrate with various monitoring systems, including:
- Pulse
- RS485
- 4-20mA
- 0-2V / 0-5V / 0-10V
- SDI-12
- Optional: WiFi, Ethernet, 4G, LoRa (via external modules/integration)
These output methods allow for data collection and display on desktop applications or mobile apps, depending on the integrated system.
4. Maintenance
Regular maintenance is crucial for ensuring the accuracy and longevity of your XS-RS01 rain gauge.
4.1 Cleaning
- Regularly clean the tipping bucket and the water outlet of the water diversion funnel. Debris such as leaves, insects, or dirt can affect measurement accuracy.
- The instrument features a patented anti-insect net and anti-blocking nozzle design to minimize blockages, but periodic inspection and cleaning are still recommended.
- The interior is equipped with a 304 stainless steel filter, which effectively filters fallen leaves and gravel. Clean this filter as needed.
4.2 Inspection
- Periodically check the rain gauge for any physical damage or signs of wear.
- Ensure the base remains level using the horizontal bubble.
5. Troubleshooting
If you encounter issues with your XS-RS01 rain gauge, consider the following:
- No Output/Incorrect Readings:
- Check all electrical connections for secure contact.
- Verify the power supply voltage is within the specified range for your output signal type.
- Ensure the tipping bucket mechanism is moving freely and not obstructed by debris.
- Confirm the rain gauge is level.
- If using RS485, check the communication protocol settings and device address.
- Slow or Blocked Drainage:
- Clean the rain inlet, tipping bucket, and internal filter to remove any accumulated debris.
5.1 User Tips
- For long-term accuracy, consider placing the rain gauge in an open area away from structures or tall vegetation that might create rain shadows or splashes.
- Regularly check the sensor's output against a known standard or a simple manual rain gauge to ensure calibration remains accurate over time.
- When installing, ensure the mounting is robust enough to withstand strong winds and other environmental factors.
6. Specifications
| Parameter | Value |
|---|---|
| Model Number | XS-RS01 |
| Rain Inlet Dimension | Φ200mm |
| Acute Angle of Cutting Edge | 40°-45° |
| Range | 0 ~ 100mm (analog signal only, RS485 signal is not limited) |
| Resolution | 0.1mm / 0.2mm / 0.5mm (selectable) |
| Rain Intensity Range | 0.01mm-4mm/min (Maximum rain intensity allowed to pass 8mm/min) |
| Accuracy | ≤ ± 3% |
| Output Signal Options |
|
| Supply Voltage |
|
| Working Temperature | 0℃ ~ 70℃ (optional heating function, can be as low as -40℃) |
| Working Humidity | < 100% (no condensation) |
| Material | ABS Engineering Plastic (moisture-proof, corrosion-proof, durable) |
| Package Dimensions | Approx. 30cm (L) x 28cm (W) x 28cm (H) |
| Package Weight | Approx. 1.9 kg |
| Certification | NONE |
| Origin | Mainland China |
7. Warranty and Support
Veinasa provides factory direct technical support for the XS-RS01 Tipping Bucket Rain Gauge. For any technical inquiries or assistance, please contact Veinasa customer support. The product is designed for high precision, good stability, and strong anti-interference ability, ensuring reliable performance in various environmental monitoring applications.