1. Introduction
Thank you for choosing the SONICAKE FlipWah Wah/Volume Combo Pedal. This versatile pedal combines a classic wah effect with an active volume control, offering guitarists a compact and robust solution for dynamic expression. Designed with a full-size treadle for comfortable operation and a durable full metal housing, the FlipWah QEP-10 is built for reliable performance. Please read this manual thoroughly to understand its features and ensure proper usage.

2. Package Contents
Ensure all items are present in the package:
- 1 x SONICAKE FlipWah Guitar Pedal (Model: QEP-10)
3. Product Features
The SONICAKE FlipWah QEP-10 offers the following key features:
- Dual Functionality: Combines Active Volume Control and Wah Effect Control in a single pedal.
- Vintage Wah Sound: Delivers a classic wah tone with an adjustable Q value for enhanced sound shaping.
- Full-Size Design: Features a full-size treadle for comfortable and precise foot control.
- Battery Power Option: Includes a battery compartment for power via a 9V battery (not included).
- Dual-Color LED Indicator: A dual-color LED light clearly shows the pedal's current operating mode (Blue for Active Volume Mode, Green for Wah Mode).
- Durable Construction: Built with a rugged, full metal housing for longevity.
- THRU Output: An additional THRU interface allows for outputting a direct signal to a tuner or other effects pedal without affecting the main signal path.

4. Setup
Follow these steps to set up your FlipWah pedal:
- Power Connection: Connect a DC 9V power adapter (not included) to the 5.5mm x 2.1mm center negative power jack. Alternatively, install a 9V battery into the battery compartment.
- Input Connection: Connect your guitar or the output of a preceding effects pedal to the 'INPUT' jack on the right side of the FlipWah.
- Output Connection: Connect the 'OUTPUT' jack on the left side of the FlipWah to your amplifier's input or the input of the next effects pedal in your chain.
- THRU Output (Optional): If you wish to send a direct, unaffected signal to a tuner or another device, connect it to the 'THRU' jack. This signal bypasses the Wah and Volume effects.


5. Operating Instructions
The FlipWah pedal is designed for intuitive operation:
- Power On: Once connected to power and your signal chain, the pedal is ready for use.
- Mode Switching: Press the footswitch located at the toe end of the pedal to toggle between Wah Mode and Active Volume Mode.
- LED Indicator:
- Blue LED: Indicates the pedal is in Active Volume Mode.
- Green LED: Indicates the pedal is in Wah Mode.
- Wah Mode (Green LED):
- Rock the pedal forward and backward with your foot to control the wah effect. Moving the pedal towards the toe (forward) increases the treble, while moving it towards the heel (backward) increases the bass.
- Q Knob: Use the 'Q' knob (located near the input jack) to adjust the intensity and sweep range of the wah effect. Turning it clockwise increases the Q, making the wah more pronounced and focused.
- Active Volume Mode (Blue LED):
- In this mode, the pedal acts as an active volume control. Rock the pedal forward to increase volume and backward to decrease volume.
- The active design ensures no tone loss even at lower volume settings.


6. Maintenance
To ensure the longevity and optimal performance of your FlipWah pedal:
- Cleaning: Use a soft, dry cloth to clean the pedal's exterior. Avoid using abrasive cleaners or solvents.
- Battery Replacement: If using battery power, replace the 9V battery when the LED indicator becomes dim or the pedal's performance degrades. Open the battery compartment on the underside of the pedal to replace.
- Storage: Store the pedal in a dry, cool place away from direct sunlight and extreme temperatures.
- Avoid Moisture: Keep the pedal away from water and other liquids.
- Handle with Care: While robust, avoid dropping or subjecting the pedal to excessive force.
7. Troubleshooting
If you encounter issues with your FlipWah pedal, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound when pedal is engaged. |
|
|
| Wah effect not working. |
|
|
| Volume control not working. | Pedal is in Wah Mode. | Press the footswitch to switch to Active Volume Mode (Blue LED). |
| LED not lighting up. | No power or low battery. | Ensure power adapter is connected or replace 9V battery. |
8. Specifications
| Parameter | Value |
|---|---|
| Model Number | QEP-10 |
| Input Impedance (Active Volume Mode) | 2MΩ |
| Output Impedance (Active Volume Mode) | 100Ω |
| Power Supply | DC 9V (5.5mm x 2.1mm center negative, 22mA) or 9V battery (not included) |
| Dimensions (D x W x H) | 148.5mm × 65.5mm × 61mm (5.85 x 2.58 x 2.4 inches) |
| Weight | 910g (2.0 lbs) |
| Control Type | Pedal |
| Effects | Wah, Active Volume |
| Hardware Interface | Exp |

9. User Tips
While no specific user reviews or Q&A were provided, here are some general tips for optimizing your experience with the FlipWah pedal:
- Experiment with Q: The 'Q' knob is a powerful tool. Spend time experimenting with different settings to find the perfect wah character for your playing style and musical context.
- Pedal Placement: Try placing the FlipWah at different points in your effects chain. Typically, wah pedals are placed early in the chain, before distortion/overdrive, while volume pedals can be placed at various points depending on desired effect (e.g., before delay for swells, after distortion for overall volume control).
- Power Supply: For consistent performance, especially during live use, a dedicated 9V DC power supply is recommended over battery power.
- Cable Quality: Use high-quality instrument cables to minimize noise and ensure optimal signal integrity.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the official SONICAKE customer support or the authorized dealer from whom you purchased the product. Keep your purchase receipt as proof of purchase.