Introduction
This manual provides essential instructions for the installation and maintenance of your new replacement vacuum cleaner filter. Please read carefully before use to ensure proper function and longevity of your vacuum cleaner.
Specifications
| Attribute | Value |
|---|---|
| Material | Plastic |
| Vacuum Part Type | Filters |
| High-concerned chemical | None |
| Type | Vacuum Cleaner Parts |
| Origin | Mainland China |
| Total Height | 110 mm |
| Filter Height | 95 mm |
| Base Diameter | 70 mm |
| Top Diameter | 30 mm |
| Net Weight | 42 g |
Figure 1: Filter dimensions and net weight.
Compatibility
This filter is designed to be compatible with various vacuum cleaner models from Rowenta, Moulinex, and Tefal. Please verify your vacuum cleaner's model number before installation.
Compatible Models:
- For Rowenta: RH7221WO, RH7233WO, RH7237WO
- Rowenta X-Pert 160 Series: MS722, MS723, RH722, RH723
- Rowenta X-Pert 3.60 Series: RH692, RH693, RH697, TY693, TY697
- Rowenta X-Pert 360 Series: RH723, TY723
- Rowenta X-Pert 360 Easy Series: TY723
- Rowenta X-Pert Easy 160 Series: RH723
- For Moulinex: MS7221, MS7233
- For Tefal: TY723, TY7233
Important Note: Many vacuum cleaner models have similar names. Always check the specific model number on the nameplate at the bottom of your device to ensure correct compatibility.
Package Contents
The package contains the selected quantity of replacement filters. Please ensure all components are present and undamaged upon arrival.
- Replacement Vacuum Cleaner Filter(s) (1 PC or 2 PCS, as selected)
Figure 2: Example of a single filter package content.
Figure 3: Example of a two-filter package content.
Setup and Installation
Follow these steps to correctly install your new vacuum cleaner filter:
- Unpack and Inspect: Open the packaging and carefully check the appearance of the new filter(s) to ensure they are complete and undamaged.
- Remove Old Filter: Locate and remove the original filter from your vacuum cleaner. Compare the new filter with the old one to confirm they have the same appearance and interface.
- Install New Filter: Insert the new filter into the designated slot in your vacuum cleaner. Adjust the new filter to match the machine's interface bayonet until it is securely in place.
Figure 4: New filters ready for installation.
Maintenance
Regular maintenance of your vacuum cleaner filter is crucial for optimal performance and air quality. Follow these general guidelines:
- Regular Cleaning: Depending on usage, tap the filter gently to remove loose dust and debris. Some filters may be washable; refer to your vacuum cleaner's original manual for specific cleaning instructions for its filter type. Ensure the filter is completely dry before re-installing.
- Replacement Frequency: Filters should typically be replaced every 3 to 6 months, or more frequently if you have pets, allergies, or use your vacuum heavily. A clogged filter can reduce suction power and strain the vacuum motor.
- Visual Inspection: Periodically inspect the filter for signs of wear, damage, or excessive dirt buildup that cannot be removed by cleaning. Replace immediately if any damage is observed.
Troubleshooting
If you experience issues after installing the new filter, consider the following:
- Reduced Suction Power: Ensure the filter is correctly seated and sealed within the vacuum cleaner. A loose or improperly installed filter can lead to air leaks and reduced suction. Also, check if the filter itself is clogged or if other parts of the vacuum (hose, brush roll) are obstructed.
- Unusual Noises: Verify that the filter is securely locked in place and not vibrating.
- Dust Escaping: This often indicates an improperly installed filter or a damaged filter. Re-check installation and inspect the filter for any tears or gaps.
User Tips
- Double-Check Compatibility: Before purchasing or installing, always confirm the exact model number of your vacuum cleaner. Many models from Rowenta, Tefal, and Moulinex have similar names, but require specific filter types. The model number is usually found on a label at the bottom or back of your vacuum.
- Keep Old Filter for Comparison: When replacing, keep your old filter handy to visually compare it with the new one. This helps ensure the new filter has the correct appearance and interface for a perfect fit.
Warranty and Support
For any questions regarding the product, installation, or potential defects, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
A PDF version of the user manual may be available for download from the seller's product page or support website for additional details. (Refer to the original product page for the PDF link: User manual (PDF))