Introduction
Thank you for choosing the Radtel RT-751 Dual Band Amateur Ham Radio. This high-performance walkie talkie is designed for reliable and versatile communication, featuring a robust 10W output, dual-band capabilities, and a user-friendly interface. This manual provides essential information for setting up, operating, and maintaining your RT-751 to ensure optimal performance and longevity.

Key Features
- Frequency Range: 136-174MHz, 400-520MHz, 350-390MHz, 240-260MHZ. Air band 108-136Mhz RX.
- High Output Power: Up to 10W for stable and effective communication.
- Frequency Copy Function: Easily copy frequencies from other radios.
- Display: 1.77-inch large LCD for clear information display.
- Charging: Convenient Type-C charging port, supporting car charging.
- Battery Life: Long-lasting 2800mAh battery, providing 3-5 days of standby time.
- Durability: Crafted from durable and impact-resistant ABS+PC hard material.
- Water Resistance: IP54 rated for splash resistance, suitable for harsh environments.
- Advanced Features: VOX, Scrambler, Compand, Dec-CTDCS/Enc-CTDCS, Channel Scan, Key Lock, FM Radio, NOAA.
- Call ID Display: For identifying incoming calls.
- Dual-stage Dual Protection: Enhanced safety and reliability.
- Intelligent Noise Reduction: For clearer audio.


Package Contents
Please check the package carefully to ensure all items are present:
- Radtel RT-751 Radio Unit
- Antenna
- Li-ion Battery Pack (2800mAh)
- Charging Base
- Power Adapter
- USB-C Charging Cable
- User Manual (this document)

Setup Guide
1. Attaching the Antenna
- Align the antenna with the connector on the top of the radio.
- Gently screw the antenna clockwise until it is firmly seated. Do not overtighten.
2. Installing the Battery
- Ensure the radio is powered off.
- Align the battery pack with the battery compartment on the back of the radio.
- Slide the battery into place until it clicks securely.
- To remove, press the battery release latch (if present) and slide the battery out.
3. Charging the Battery
Before first use, fully charge the battery. The RT-751 supports two charging methods:
- Using the Charging Base: Place the radio with the battery installed into the charging base. Ensure the charging contacts align. The indicator light on the base will show charging status.
- Direct USB-C Charging: Connect the USB-C cable to the port on the side/bottom of the radio and plug it into a compatible USB power source (e.g., wall adapter, car charger, power bank).

Operating Instructions
1. Power On/Off and Volume Control
Rotate the top knob clockwise to power on the radio and adjust the volume. Rotate counter-clockwise until it clicks to power off.
2. Frequency/Channel Selection
- Use the keypad to directly input frequencies.
- Use the UP/DOWN arrow buttons to navigate through frequencies or channels.
- The 1.77-inch LCD will display the current frequency or channel information.
3. Transmitting and Receiving
Press and hold the Push-To-Talk (PTT) button on the side of the radio to transmit. Speak clearly into the microphone. Release the PTT button to receive.
4. Copy Frequency (Quick Copy)
The RT-751 features a quick frequency copy function. Refer to the detailed instructions in the full manual for specific steps on how to copy frequencies from another radio.

5. VOX (Voice Operated Transmit)
VOX allows for hands-free transmission. When enabled, the radio will automatically transmit when it detects your voice. Adjust the VOX level in the menu to control sensitivity.
6. Scrambler and Compand
These features enhance privacy and audio quality. The Scrambler encrypts your voice, while Compand improves clarity by compressing and expanding the audio signal.
7. Channel Operations
- Channel Save/Delete: Store frequently used frequencies as channels for quick access.
- Channel Name: Assign custom names to channels for easier identification.
8. Scan Function
Activate the scan function to automatically search for active frequencies or channels within the programmed range.
9. Key Lock Mode
Enable key lock to prevent accidental button presses. This is useful during transport or when carrying the radio.
10. FM Radio
The RT-751 includes an FM radio function for entertainment. Access this feature through the menu.
11. Power Select (High/Low)
Adjust the transmit power between high and low settings to conserve battery life or extend range as needed. The maximum output is 10W.

12. Other Functions
The radio also includes features such as NOAA weather alerts, Signal Type, Member/Group Selection, Power On Tone, Roger Beep, Voice Sort, Double Work, Call Tone, and Display Type. Consult the full user manual for detailed instructions on these advanced settings.
Specifications
| Attribute | Value |
|---|---|
| Brand Name | radtel |
| Model Number | RT-751 |
| Walkie Talkie Type | Portable |
| Frequency Range | 136-174MHz, 400~520MHz, 350-390MHz, 240-260MHZ (Air band 108-136Mhz RX) |
| Output Power (W) | 10W (High/Low selectable) |
| Storage Channel | 199 |
| Battery Capacity (mAh) | 2800mAh |
| Battery Included | Yes |
| Display | Yes (1.77-inch LCD) |
| Waterproof / Water-Resistant | IP54 (Splash-resistant) |
| Maximum Range | 5km-10km |
| Material | ABS+PC Plastic |
| Dimensions | 126mm*60mm*40mm |
| Charging Type | USB-C |
Maintenance
- Cleaning: Use a soft, damp cloth to clean the radio's exterior. Do not use harsh chemicals or abrasive cleaners.
- Battery Care: To prolong battery life, avoid overcharging or completely draining the battery. Store the radio and battery in a cool, dry place when not in use for extended periods.
- Antenna: Ensure the antenna is securely attached. Do not operate the radio without an antenna, as this can damage the transmitter.
- Water Exposure: While the RT-751 is IP54 splash-resistant, it is not submersible. Avoid prolonged exposure to heavy rain or immersion in water.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Radio does not power on | Low or dead battery; improperly installed battery | Charge the battery; ensure battery is correctly installed. |
| Cannot transmit or receive | Incorrect frequency/channel; antenna not attached; low battery; PTT button issue | Verify frequency/channel; attach antenna; charge battery; check PTT button. |
| Poor audio quality | Weak signal; incorrect squelch level; microphone/speaker obstruction | Move closer to the other radio; adjust squelch; clear obstructions. |
| Keypad unresponsive | Key Lock is enabled | Disable Key Lock (refer to operating instructions). |
User Tips
- Power Output: The RT-751 offers both high (10W) and low power settings. Use the low power setting for shorter distances to conserve battery life, and high power for maximum range.
- Frequency Management: Utilize the frequency copy feature to quickly match settings with other radios. For advanced users, consider programming channels for frequently used frequencies to streamline operation.
- Battery Longevity: The 2800mAh battery provides excellent standby time. For extended field use, carrying a power bank with a USB-C cable is recommended for convenient recharging.

Warranty and Support
Radtel products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or visit the official Radtel website. Keep your purchase receipt as proof of purchase.