TOP-MAX Car DVR Dash Cam User Manual

1. Introduction

Thank you for choosing the TOP-MAX Car DVR Dash Cam. This manual provides essential information for the proper installation, operation, and maintenance of your device. Please read it carefully before use to ensure optimal performance and safety.

2. Safety & Warnings

• Storage Card Handling: It is strictly prohibited to plug in or remove the storage card while the recorder is powered on for recording. The replacement of the storage card must be done after the device is completely turned off. Failure to do so may cause loss of the current recording file or physical damage to the storage card.
• Power Supply: Use only the car charger provided with the product (specifications: 5V/2.5A) or compatible power sources as per product parameters.
• Installation: Ensure the device is securely mounted and wiring does not obstruct the driver's view or interfere with vehicle operations.

3. Specifications

4. Setup and Installation

4.1. Preparation Before Installation

1. Clean the Surface: Thoroughly wipe the target installation area on your windshield with a dust-free cloth and isopropanol or a suitable cleaning agent. Ensure the glass surface is free of water stains, oil film, and dust. This is crucial for the bracket to adhere firmly.
2. Avoid Dot Matrix Area: If using a suction cup bracket, completely avoid the black ceramic dot matrix area of the front windshield. Installing on this area can weaken the suction force and cause the recorder to fall off.

4.2. Installation Location Requirements

• Mounting Position: The dash cam should be fixed in the rear area of the rearview mirror.
• Secure Attachment: Use the original suction cups or 3M VHB adhesive to firmly fix the device.
• Alignment: Ensure the equipment centerline is basically aligned with the vehicle's centerline.
• Viewing Angle: Control the up and down depression angle between 15° and 25°. This angle allows the camera to fully cover the lane and road conditions without obstructing the driver's view.

4.3. Wiring Specifications

1. Concealed Wiring: The wiring must be strictly concealed along the gap between the ceiling, the inner side of the A-pillar decorative panel, and the bottom path of the glove box. This avoids interfering with airbag deployment.
2. Use Pry Bar: Use the pry bar included in the packaging box to press the power cord under the A-pillar rubber strip.
3. Secure Cables: Do not let the power cord hang freely or affect the driver's operation. After the cable runs along the back panel of the glove box towards the lower part of the center console, it should be tied and fixed in sections with nylon zip ties to prevent shaking during driving.
4. Avoid Obstruction: Do not hang the power cord in the middle of the cab to avoid obstructing the line of sight or interfering with driving operations.

4.4. Power Supply Requirements

• Standard Car Charger: Strictly use the car charger that comes standard with the packaging (specifications are 5V/2.5A or follow the product parameters).
• Parking Monitoring (Advanced): When the parking monitoring function needs to be activated for a long time, a safe box power supply scheme must be adopted. This involves connecting the ACC and constant power dual output terminals and installing the distribution insurance and voltage reduction module by professional personnel.
• Cigarette Lighter Use: If a cigarette lighter is used for power supply, ensure the cable interface avoids operating areas such as shift levers to prevent interference with daily driving.

4.5. Post-Installation Check

• Initial Check: After the first installation, check for any abnormal noise when opening and closing the doors.
• Stability Test: Test on bumpy road conditions to confirm that the equipment is not loose.
• Adhesive Curing: If adhesive is used, turn off the engine and let it stand for 2 hours until the adhesive base is fully cured.

5. Operating Instructions

5.1. Powering On/Off

• The device will typically power on automatically when the vehicle's ignition is turned on and power is supplied.
• It will power off automatically when the vehicle's ignition is turned off.

5.2. Basic Recording Functions

• Loop Recording: The dash cam continuously records video. When the storage card is full, it automatically overwrites the oldest unlocked footage.
• G-Sensor (Gravity Sensing): In the event of a sudden impact or collision, the built-in G-Sensor will detect the event and automatically lock the current video segment, preventing it from being overwritten.
• Motion Detection: When enabled, the dash cam will start recording automatically if it detects movement in front of the vehicle while parked.
• Parking Monitoring: This feature provides surveillance when your vehicle is parked. It typically requires a continuous power supply (see Section 4.4).

5.3. WiFi and APP Connection

The dash cam supports WiFi connectivity, allowing you to connect it to your smartphone via a dedicated application.

1. Download App: Search for the official TOP-MAX Dash Cam app on your smartphone's app store (e.g., "My Car Cam" as suggested by image).
2. Enable WiFi: Turn on the WiFi function on your dash cam (refer to the device's on-screen menu if available, or assume it's always on for connection).
3. Connect to WiFi: On your smartphone, go to WiFi settings and connect to the dash cam's WiFi network (SSID and password should be provided in the app or on the device itself).
4. Open App: Launch the app. You should be able to view live footage, access recorded videos, and adjust settings directly from your phone.

6. Maintenance

• Cleaning: Regularly clean the camera lens and the device's exterior with a soft, dust-free cloth. For stubborn marks, use a small amount of isopropanol or a mild cleaning agent, ensuring no liquid enters the device.
• Storage Card: Periodically format your TF card (e.g., once a month) to maintain optimal recording performance and prevent data corruption. Always ensure the device is powered off before inserting or removing the TF card.
• Firmware Updates: Check the manufacturer's website or the companion app for any available firmware updates to ensure your device has the latest features and bug fixes.

7. Troubleshooting

8. User Tips

• App Connectivity: Utilize the WiFi and smartphone app feature to easily view live footage, download important video clips directly to your phone, and adjust settings without needing to remove the TF card or interact with small device buttons.
• Optimal Viewing Angle: Take advantage of the 60° rotatable camera lens to fine-tune your recording angle after initial installation, ensuring you capture the most critical areas of the road.
• Regular Checks: Periodically check the dash cam's recording status and ensure it's securely mounted, especially after driving on rough roads.

9. Support and Contact Information

For further assistance or inquiries, please refer to the official user manual PDF or contact the manufacturer/representative directly.

9.1. Manufacturer Information

Guangzhou Kuxiong Shi Trading Co., Ltd
No. 503, Building 3, Courtyard 2, Zhongquantang Road, Industrial Avenue, Haizhu District, Guangzhou City
Phone: 86-18814180059
Email: tingting26181@outlook.com

9.2. EU Authorized Representative

Sea&Mew Consulting GmbH
Mittenhuber Straße 4, 92318 Neumarkt
Phone: +4915224685061
Email: Compliance.EU@outlook.com

9.3. Additional Resources

A detailed user manual is available in PDF format: Download User Manual (PDF)