1. Product Overview
The Philips TAS1009 is a compact and portable mini Bluetooth speaker designed to deliver high-fidelity stereo sound. Featuring Bluetooth 5.3 for stable connections, a 360-degree surround sound experience, and a built-in microphone for hands-free calls, it's suitable for both indoor and outdoor use. The speaker also includes colorful, changeable light strips for an enhanced visual experience.
2. Setup
2.1 Charging the Speaker
Before first use, fully charge the speaker. The TAS1009 is equipped with a 1200mAh 18650 single-cell battery and charges via a Type-C port.
- Connect the provided Type-C charging cable to the speaker's charging port and a suitable USB power source.
- A full charge takes approximately 2.5 hours.
- Once fully charged, the speaker provides approximately 30 hours of playback time.
2.2 Bluetooth Pairing
The TAS1009 uses Bluetooth 5.3 for efficient and stable wireless transmission up to 10 meters.
- Power on the speaker by pressing and holding the power button (usually indicated by a power symbol).
- The speaker will enter pairing mode, indicated by a flashing light or an audible prompt.
- On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
- Select "Philips TAS1009" from the list of devices to connect.
- Once connected, the speaker will provide an audible confirmation, and the light indicator will change.
2.3 TWS (True Wireless Stereo) Pairing
For an enhanced stereo experience, you can pair two TAS1009 speakers together.
- Ensure both speakers are charged and powered off.
- Power on both speakers. They should automatically enter TWS pairing mode or you may need to press a specific button (refer to the operating section for button functions).
- Once successfully paired with each other, one speaker will act as the master and the other as the slave.
- Connect your device to the master speaker via Bluetooth as described in section 2.2.
- Audio will now play in stereo through both speakers.
3. Operating the Speaker
3.1 Controls
The TAS1009 features intuitive button controls located on the bottom of the speaker for easy access to various functions.
| Button | Music Mode Function | Phone Mode Function |
|---|---|---|
| Power Button | Power On/Off | Power On/Off |
| Play/Pause Button | Play/Pause music | Answer/Hang up call |
| Volume + Button | Increase Volume | N/A |
| Volume - Button | Decrease Volume | N/A |
| Next Track Button | Next Track | N/A |
| Previous Track Button | Previous Track | N/A |
3.2 Sound Experience
The TAS1009 offers a 360-degree surround sound experience, ensuring consistent audio quality from any angle. It features a 52mm dynamic full-range driver for surging low frequencies and sensitive beats.
3.3 Hands-Free Calling
With its built-in microphone, the TAS1009 allows for convenient hands-free calling.
- When a call comes in, press the Play/Pause button once to answer.
- To end a call, press the Play/Pause button once again.
3.4 Light Strips
The speaker features colorful, changeable light strips that add a decorative element to your listening experience.
4. Maintenance
To ensure the longevity and optimal performance of your Philips TAS1009 speaker, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to wipe the speaker's exterior. Do not use abrasive cleaners, solvents, or strong chemicals, as they may damage the surface.
- Storage: Store the speaker in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
- Battery Care: For best battery life, avoid fully discharging the battery frequently. If storing for an extended period, charge the battery to about 50% every few months.
- Protection: Avoid dropping the speaker or exposing it to excessive impact. While durable, it is not waterproof.
5. Troubleshooting
If you encounter issues with your Philips TAS1009 speaker, try the following troubleshooting steps:
- No Power: Ensure the speaker is fully charged. Connect it to a power source using the Type-C cable and allow it to charge for at least 30 minutes before attempting to power it on again.
- Cannot Pair via Bluetooth:
- Ensure the speaker is in pairing mode (indicated by a flashing light).
- Turn off and on Bluetooth on your device.
- Move your device closer to the speaker (within 10 meters).
- Forget the speaker from your device's Bluetooth list and try pairing again.
- Ensure no other devices are currently connected to the speaker.
- No Sound:
- Check the volume levels on both the speaker and your connected device.
- Ensure the speaker is properly paired with your device.
- If using TWS, ensure both speakers are correctly paired to each other and then to your device.
- Poor Sound Quality:
- Move the speaker closer to your device to reduce interference.
- Ensure there are no obstructions between the speaker and your device.
- Check if the audio source quality is high.
6. Specifications
Detailed technical specifications for the Philips TAS1009 Mini Bluetooth Speaker:
| Feature | Specification |
|---|---|
| Brand | Philips |
| Model | TAS1009 |
| Control Method | Keys |
| Bluetooth Version | 5.3 |
| Bluetooth Solution | Jie Li 6965E |
| Amplifier Chip | HAA2018A |
| Supported Bluetooth Protocol | A2DP, AVRCP, HFP |
| Bluetooth Operating Frequency | 2440-2480MHz |
| Maximum Wireless Range | <10m |
| Output Power | 3W |
| Sensitivity | 81dB |
| Frequency Range | 50Hz-20KHz |
| Audio Signal-to-Noise Ratio | 85dB |
| Speaker Unit | 52MM Moving Coil |
| Battery Capacity | 1200mAh (18650 single cell) |
| Charging Port | Type-C |
| Charging Time | Approx. 2.5 hours |
| Playback Time | Approx. 30 hours |
| Product Weight (bare) | 213g |
| Product Dimensions (H x W x D) | 66.6 x 79.3 x 79.3 mm |
| Material | ABS+AS+Silicone |
| Input/Output | USB |
| Acoustic Enclosure | Other |
| Sound Mode | Standard Mode |
| Audio Crossover | Full-Range |
| Built-in Microphone | Yes |
| Waterproof | No |
7. Warranty and Support
Philips products are designed and manufactured to the highest standards. For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Philips support website. Keep your proof of purchase for any warranty claims.
8. User Tips
- Optimal Placement: For the best 360-degree sound experience, place the speaker in the center of your listening area, away from walls or large objects that might obstruct sound dispersion.
- TWS Setup: When setting up TWS, ensure both speakers are close to each other during the initial pairing process for a stable connection.
- Battery Preservation: To maximize battery life over time, avoid leaving the speaker fully discharged for long periods.
- Hands-Free Clarity: For clearer hands-free calls, ensure you are speaking directly towards the speaker's microphone.
