1. Introduction
The LAUNCH X-431 PRO3 V+ ELITE is an advanced diagnostic tool that leverages LAUNCH's extensive experience in automotive diagnostics. It offers a wide range of functions for various vehicle types, providing precise and reliable test results.
Key features include Intelligent Diagnose, Local Diagnose, EV (Electric Vehicle) Diagnose & Service, SmartLink Super Remote Diagnose, X431 Remote Diagnose, Service Functions, Toolbox, Software Update, Feedback, Online Mall, and Diagnostic History.
2. Important Safety Information
Warning: To avoid personal injury, property damage, or accidental damage to the product, read all of the information in this section before using the product.
2.1 Work Area Safety
- Keep work area clean and well lit. Cluttered benches and dark areas may cause accidents.
- Do not connect or disconnect the tool while the ignition is on or the engine is running.
- DO NOT attempt to operate the tool while driving the vehicle. Have a second person to operate the tool.
- Before testing a vehicle, put the transmission in PARK (for automatic transmission) or NEUTRAL (for manual transmission). Engage the parking brake and chock the tires.
- NEVER smoke or allow a spark or flame in vicinity of battery or engine.
- The vehicle shall be tested in a well-ventilated work area, as engines produce various poisonous compounds (hydrocarbon, carbon monoxide, nitrogen oxides, etc.).
- Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or heavy dust.
- Never leave the vehicle unattended while testing.
- Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
- Use extreme caution when working around the ignition coil, distributor cap, ignition wires and spark plugs. These components create hazardous voltages when the engine is running.
- Keep bystanders, children and visitors away while operating the tool.
- This product is not a toy. Do not allow children to play with or near this tool.
- Use as intended only. Do not modify.
- Inspect before every use; do not use if parts are loose or damaged.
- Do not place the tool on any unstable surface.
- Handle the tool with care. If the tool is dropped, check for breakage and any other conditions that may affect its operation.
- Keep the tool dry, clean, free from oil, water or grease. Use a mild detergent on a clean cloth to clean the outside of the tool when necessary.
- Store the tool and accessories in a locked area out of the reach of children.
- To avoid damaging the tool or generating false data, please make sure the vehicle battery is fully charged and the connection to the vehicle DLC (Data Link Connector) is clear and secure.
- If the VCI (Vehicle Communication Interface) is not in use for a long period of time, it is suggested to unplug the VCI from vehicle’s DLC to conserve battery power.
2.2 Electrical Safety
- Do not use the tool while standing in water.
- Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators.
- Do not expose the tool or power adaptor to rain or wet conditions. Water entering the tool or power adaptor increases the risk of electric shock.
2.3 Personal Safety
- Wear an ANSI-approved eye shield when testing or repairing vehicles.
- Do not wear loose clothing or jewelry. Keep hair, clothing, hands, tools, and test equipment away from moving or hot engine parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
- Do not use the tool while tired or under the influence of drugs, alcohol, or medications. A moment of interruption can result in serious personal injury.
- People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure.
- The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
- There are no user serviceable parts. Have the tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the equipment is maintained.
- Please use the included battery and charger. Risk of explosion if the battery is replaced with an incorrect type.
- Automotive batteries contain sulfuric acid that is harmful to skin. In operation, direct contact with the automotive batteries should be avoided. Keep the ignition sources away from the battery at all times.
2.4 Precautions on Operating Vehicle’s ECU
- Do not disconnect battery or any wiring cables in the vehicle when the ignition switch is on, as this could avoid damage to the sensors or the ECU.
- Do not place any magnetic objects near the ECU. Disconnect the power supply to the ECU before performing any welding operations on the vehicle.
- Use extreme caution when performing any operations near the ECU or sensors. Ground yourself when you disassemble PROM, otherwise ECU and sensors can be damaged by static electricity.
- When reconnecting the ECU harness connector, be sure it is attached firmly, otherwise electronic elements, such as ICs inside the ECU, can be damaged.
3. Package Contents
The following items are typically included in the package. Note that accessories may vary by destination. Please consult your seller or check the supplied packing list.

- Display Tablet: 1 unit. The central processor and monitor for the system, used to receive and analyze live vehicle data and output test results.
- SmartLink C V2.0 Device: 1 unit. Collects vehicle data and sends it to the tablet for analysis.
- Diagnostic Cable: 1 unit. Connects the SmartLink C device to the OBD II vehicle's DLC.
- Data Cable (Type A-Type C): 1 unit. Connects the tablet to a PC for data exchange/charging.
- Data Cable (Type A-Type B): 1 unit. Connects the SmartLink C device to PC for J2534 reprogramming or to the diagnostic tablet for vehicle diagnosis.
- Crossover Cable: 1 unit. Connects the SmartLink C device to the modem for SmartLink Super Remote Diagnostics.
- Password Envelope: 1 unit. Contains the product Serial Number and Activation Code for product registration.
- Quick Start Guide: 1 unit.
- Power Adaptor + Switching Adaptors: 1 set. Charges the tablet via the AC outlet.
- Non-16pin Adaptor Kit for Passenger Cars (Optional): For different vehicle diagnostic sockets, may be necessary to use one of the non-16pin connectors included within the kit.
3.1 Detailed Packing List

| No. | Part Category | Part No. | Part Name | Quantity |
|---|---|---|---|---|
| 1 | Main unit | 201027013 | Overseas super remote diagnosis box V2.0 | 1 |
| 2 | Main unit | 201027021 | X-431 PRO3 9th generation overseas version host | 1 |
| 3 | Connector | 105046636 | HD15M to OBDII 16 male integrated test connector | 1 |
| 4 | Connector | 105022419 | Category 5 Gigabit network cable (blue) 15m | 1 |
| 5 | Test cable | 105045644 | DB15F to HD15F test main line (without DC) L=1000mm | 1 |
| 6 | Test cable | 105022248 | X431 PAD4HD USB A-type to B-type cable | 1 |
| 7 | Accessories | 102161157 | British standard conversion head | 1 |
| 8 | Accessories | 102161158 | European gauge conversion head | 1 |
| 9 | Accessories | 102210300 | American standard conversion head | 1 |
| 10 | Accessories | 107022632 | Universal PIN envelope | 1 |
| 11 | Accessories | 107013939 | X-431 PRO3 LINK Quick Start (SmartLink V2.0, Multilingual) | 1 |
| 12 | Accessories | 107013772 | X-431 PRO3 V+ ELITE manual (English) | 1 |
| 13 | Accessories | 105022249 | X-431 PRO3 cloud car custom Type A to Type C USB data cable | 1 |
4. Components & Controls
The diagnostic system consists of two main components: the Display Tablet and the SmartLink C V2.0 Device.
4.1 Display Tablet
The tablet serves as the central processing unit, receiving and analyzing live vehicle data from the SmartLink C device and displaying test results.

- Microphone: For audio input.
- Type-A USB Port: Connects to the SmartLink C device for vehicle diagnosis via USB cable, or to compatible add-on modules (e.g., Videoscope) or USB storage devices.
- Type-C USB Port: Connects to an AC outlet for charging or to a PC for data exchange.
- POWER Key: Turns the tablet on/off. Press and hold for 8 seconds for a forced shutdown.
- LCD Screen: Displays test results and user interface.

- Speakers: For audio output.
- Rear Camera: For capturing images.
- Adjustable Stand: Allows for comfortable viewing angles.
4.2 SmartLink C V2.0 Device
The SmartLink C V2.0 device offers powerful functions and can be used in several scenarios:
- As a VCI (Vehicle Communication Interface): Works with the tablet's Diagnose module to obtain vehicle data and send it to the tablet wirelessly or via data cable for analysis.
- As a SmartLink C (Customer) Dongle: Works with the tablet's SmartLink module for remote diagnostic requests. The tablet issues requests, and the SmartLink C dongle receives and executes commands from a remote SmartLink B (Business).
- As a Local J2534 PassThru Device: Can be used with a PC running OEM diagnostic software for J2534 reprogramming.

- DB-15 Diagnostic Connector: Connects to the vehicle’s DLC (Data Link Connector) port via the diagnostic cable.
- Touch Screen: For user interaction.
- LAN/WAN Port: For network connectivity.
- DC-IN Power Jack: Obtains power via diagnostic cable to the vehicle's DLC port or an external DC power supply. Warning: Do not connect to an external DC power supply when already connected to the vehicle's DLC port.
- Data I/O Port: Connects to the tablet for vehicle diagnosis or to a PC for J2534 reprogramming.
5. Specifications
5.1 Display Tablet
- Operating System: Android 10.0
- Processor: 2.0GHz 4-core
- Memory: 4GB
- Storage: 64GB
- Battery: 47.880Wh (7.6V, 6300mAH)
- Display: 10.1-inch capacitive touch screen, 1280 x 800 pixels resolution
- Camera: Rear-facing 8.0MP
- Connectivity: Wi-Fi (802.11a/b/g/n/ac), Bluetooth
- Interface: TYPE A *1 & TYPE C*1
- Working Temperature: 0℃ ~ 50℃
- Storage Temperature: -20℃ ~ 70℃
5.2 SmartLink C V2.0 Device
- Size: 200mm x 110mm x 47mm
- Working Voltage: DC 9~36V
- Power Consumption: ≤ 6W
- Communication: Wireless and Wired
- Working Temperature: 0℃ ~ 50℃
5.3 Physical Characteristics
- Item Weight: 9kg
- Package Dimensions (L x W x H): 44cm x 18cm x 38cm
6. Setup and Initial Use
6.1 Charging & Turning On
- Plug one end of the included charging cable into the tablet's charging port, and the other end into the power adaptor.
- Connect the power adaptor to an AC outlet.
- A charging icon will appear on the screen. Once the battery is fully charged, the icon will change. Unplug the power adaptor from the tablet.
Note: If the battery is completely discharged or unused for a long period, it may take up to 5 minutes of charging before the tool powers on. Always use the supplied power adaptor to avoid damage.
To turn the tool off, press and hold the [POWER] key for 3 seconds until an option menu appears, then tap "Power off".
6.2 Screen Layout & Basic Settings
The bottom of the screen features several on-screen buttons:
- BACK: Returns to the previous screen.
- HOME: Navigates to the Android home screen.
- Recent Apps: Displays recently launched applications.
- Screenshot: Captures the current screen.
Adjust Brightness
- On the home screen, tap Settings > Display > Brightness level.
- Drag the slider to adjust the brightness. (Reducing brightness helps conserve battery power).
Change System Language
The tool supports multiple system languages (e.g., Chinese Simplified, English, Traditional Chinese, Japanese, Korean, French, Spanish, Portuguese, Italian, Russian, German, Polish, Romanian, Dutch, Arabic, Czech, Danish, Greek, Persian, Finnish, Hungarian, Swedish, Turkish, Serbian, Croatian).
- On the home screen, tap Settings > System > Language & input > Languages.
- Tap Add a language, then choose the desired language.
- Tap and hold the desired language, drag it to the top of the list, and release to set it as the system language.
Set Standby Time
The screen will lock and the system will enter sleep mode to save power if no activity occurs within the defined standby period.
- On the home screen, tap Settings > Display > Advanced > Sleep.
- Choose the desired sleep time.
WLAN Setup
The tablet's built-in Wi-Fi allows online registration, internet browsing, app downloads, email, remote diagnostics, and software updates.
Connect to a Wi-Fi network:
- On the home screen, tap Settings > Network & Internet > WLAN.
- Slide the Wi-Fi switch to ON. The tablet will search for available wireless networks.
- Select a wireless network. If it's open, the tablet connects automatically. If encrypted, enter the password.
- Once "Connected" appears, the Wi-Fi connection is complete.
Note: Disable Wi-Fi when not needed to conserve battery power.
Disconnect from a Wi-Fi network:
- On the home screen, tap Settings > Network & Internet > WLAN.
- Tap the network with a "Connected" status, then tap Disconnect.
6.3 Register & Update
For initial use, registration is required to activate the tool.
- Tap the application icon on the home screen, then tap Login on the upper right corner.
- If you are a new user, tap New Registration and fill in the required information (Username, Password, Email, Zip Code, CAPTCHA).
- After registration, input the 12-digit Product Serial Number and 8-digit Activation Code (found in the password envelope), then tap Activate.
- Once registration is complete, the tablet and SmartLink C device will automatically establish wireless communication.
If you are an existing member, input your username and password and tap Login. The tablet has an auto-save function for login credentials.
If you forgot your password, tap Retrieve password and follow the on-screen instructions.
6.4 Vehicle Connection
Preparation
- Ensure the ignition is OFF and vehicle battery voltage is within 9-14V or 18-30V.
- Locate the vehicle's DLC (Data Link Connector). For passenger cars, it's usually within 12 inches of the instrument panel, under or around the driver's side. For commercial vehicles, it's always in the driver's cab.
Note: If the DLC cannot be found, refer to the vehicle's service manual.
- Connect the VCI device to the vehicle.
- Turn the vehicle's ignition ON with the engine OFF.
- The tool is now ready for diagnostics.
Connecting the VCI Device
For OBD II vehicles, use the included diagnostic cable (DB15F to HD15F data cable and HD15M to OBD16 adaptor) to connect the VCI to the vehicle's DLC port.
For non-OBDII vehicles, you will need to select the appropriate adaptor based on the vehicle's DLC port type. Disconnect the HD15F to OBD16 adaptor from the DB15F to HD15F data cable, then connect the data cable with the specific non-OBDII adaptor (sold separately) and tighten the screws. The connection process is similar to the OBDII connection, but uses a different adaptor.
If performing vehicle diagnosis via data cable, connect one end of the data cable into the VCI, and the other end into the data I/O port of the tablet.
Communication Setup
The tablet can communicate with the VCI device wirelessly or via a wired (USB) connection.
- Wireless Communication: Automatically established after user registration.
- Wired (USB) Communication: A simple and quick way to connect. After properly connecting the data cable from the tablet to the VCI, the VCI navigation button on the screen will indicate a successful USB connection.
Note: USB connection provides the most stable and fastest communication. If multiple communication methods are available, the tablet will prioritize wired communication.
7. Operating the Diagnostic Tool
7.1 Job Menu Overview
After logging in, the main menu provides access to various functions:
| Name | Description |
|---|---|
| Intelligent Diagnose | Obtain vehicle data from the cloud server for quick test via VIN reading; check historical repair records online. |
| Local Diagnose | Diagnose a vehicle manually. |
| Remote Diagnose | Access SmartLink Super remote diagnostics or X431 Remote Diagnostics platforms. |
| EV (Electric Vehicle) Diagnose | Diagnose electronic control systems, detect battery packs, and perform service functions for new-energy vehicles. (Requires optional New Energy Vehicle Diagnosis Add-on Kit). |
| Special Function | Offers coding, reset, relearn, and other service functions to restore vehicle functionality after repair or replacement. |
| Toolbox | Access additional add-on tools like TPMS, ADAS, Oscilloscope, Sensor simulator, BST360 Battery Tester, Immobilizer programmer, Videoscope, Current clamp, Multimeter, Insulation Tester, Key programmer. |
| Software Update | Update vehicle diagnostic software and APK. |
| X-431 Diagnostic Kit | Includes vehicle coverage, CANBUS pin detection, CANScope, and Fix connector firmware/system. |
| Feedback | Send recent 20 diagnostic logs for issue analysis. |
| Mall | Subscribe to extra software or service functions. |
| LAUNCH Academy | Access repair cases, operation skills, and training videos. |
| Repair Info | Check repair information and request support. |
| User Info | Manage VCI, diagnostic reports & records, change password, order, and login/logout. |
| Settings | Configure diagnostic application settings. |
| About | View software version, product manual, service agreement, and privacy policy. |
7.2 Intelligent Diagnose
This function allows for easy VIN (Vehicle Identification Number) retrieval and decoding via wireless communication between the tablet and VCI. The system then retrieves vehicle information from the remote server and guides you to the vehicle information page, bypassing manual menu selection.
Notes:
- Ensure the VCI device is properly connected to the vehicle’s DLC.
- A stable network connection is required.
Procedure:
- Tap Intelligent Diagnose on the Job menu screen to start pairing with the VCI device.
- After pairing, the tablet reads the vehicle VIN.
- If the VIN is found in the remote server database, the system will display vehicle information and options to:
- Tap Diagnostic to start a new diagnostic session.
- Tap Scan History to view historical repair records.
- Tap Quick access to go directly to the diagnostic function selection screen.
- If VIN information cannot be accessed, you can:
- Tap the input field to manually enter the VIN, then tap OK.
- Tap the camera icon to launch the VIN recognition module and scan the VIN.
VIN Scanning Tips: Place the VIN inside the viewfinder rectangle. Common locations are the top left corner of the dashboard, driver’s door or post, and firewall under the hood. VINs are 17 characters, using capital letters A-Z (excluding I, O, Q) and numbers 0-9.
7.3 Local Diagnose
This function allows manual diagnosis of electronic control systems for single vehicle models.
Accessing Diagnostic Software:
- VINSCAN: Provides quick access. Use Camera Scan (automatic VIN scan) or Enter VIN (manual input). If successful, it directly enters the diagnostic function selection menu.
- Diagnostic Software Logo: Tap a corresponding logo and follow on-screen instructions.
On-screen Buttons:
- Vehicle Coverage: View supported vehicle models.
- Search Bluetooth: Search for available VCI.
Diagnostic Functions:
- System Topology: Displays vehicle systems in a topology structure. Different highlight bars indicate detection status.
- System List: Displays vehicle systems in a list.
- ADAS Calibration: Performs ADAS calibration operations (extracted as a functional module for quick access).
- Smart Detection: Quickly access all electronic control units, generate a health report, and display malfunctioning systems in red (with DTC quantity) and properly functioning systems in green.
- Report: Save current data in text format. Reports are saved in User Info -> My Report -> Health Reports.
- Compare Results: Select a pre-repair report to compare with post-repair reports to identify cleared or unfixed DTCs.
- Diagnostic Plan: Provides diagnostic plans and repair solutions for detected DTCs.
- Clear DTCs: Clear existing diagnostic trouble codes. Note: Clearing DTCs does not fix the underlying problem.
- System Scan: Quickly scan installed vehicle systems.
- Select Detection: Manually select specific systems for scanning.
- Enter: Select a system to enter its diagnostic function selection screen.
- Read Fault Code: Displays detailed information of DTC records.
- Freeze Frame: View snapshot of critical parameter values when DTC was set.
- Help: View help information.
- Code Search: Search for more information about the DTC online.
- Report: Save current data in text format.
- Clear DTCs: Clear existing diagnostic trouble codes.
- Clear Fault Code: Erase codes from the vehicle. Ensure ignition is ON and engine is OFF.
- Read Data Stream: Retrieves and displays live data and parameters from the vehicle’s ECU.
- Select desired items and tap OK.
- Display Styles: Tap to set display style (sticky top, bold, red for out-of-range values).
- Measurement Unit: Tap to switch between English or Metric units.
- Display Modes: Value (text list), Graph (waveform graphs), Combine (graph merge for comparison).
- Compare Sample: Import sampled data stream values for comparison against standard range.
- Record: Record diagnostic data.
- Save Sample: Customize and save standard range of live data stream items.
- Read Freeze Frame: Takes a snapshot of operating conditions when a vehicle fault occurs.
- Actuation Test: Access vehicle-specific subsystem and component tests. The tablet outputs commands to the ECU to drive actuators and determine system integrity.
- Special Functions: Offers coding, reset, relearn, and other service functions to restore vehicle functionality.
7.4 Remote Diagnose
This feature enables remote vehicle diagnosis and instant messaging, facilitating faster repairs.
SmartLink Super Remote Diagnostics
SmartLink is a powerful remote vehicle diagnosis and service system. It allows technicians (SmartLink C) to seek expertise from remote master technicians or repair shops (SmartLink B) for complex vehicle problems.
The SmartLink Remote Diagnostics system involves the SmartLink C V2.0 device connecting to the vehicle's DLC, which then communicates with the diagnostic tablet. The tablet, through the internet, connects to the SmartLink Service Platform. This platform facilitates communication between the SmartLink C (customer) and SmartLink B (service provider), allowing for remote diagnostic services.
- SmartLink Service Platform: Can be accessed from the SmartLink module of the diagnostic tablet. It has "Common user" (for SmartLink C) and "Service provider" (for SmartLink B) modules.
- SmartLink C (Customer): Binds SmartLink C dongles, submits remote repair orders, and connects to the vehicle's DLC port to collect data for remote SmartLink B. Supports CAN / CAN FD / J2534 diagnostic standards.
- SmartLink B (Business): Binds SmartLink B dongles and accepts orders from SmartLink C. Can work with LAUNCH-specific diagnostic tools or third-party tools via a web client.
X431 Remote Diagnostics
This option helps repair shops and technicians with instant messaging and remote diagnosis.
- Tap Remote Diagnose > X431 Remote Diagnosis.
- Messages tab: Displays incoming messages.
- Contacts tab: Enter friend list.
- Remote: Slide switch to ON to make the tool accessible online for remote control.
- Search bar: Input username to search and add friends.
- Group chat operation: Start and manage group chats.
- Contacts list: Displays friends list.
Adding Friends:
- Tap Contacts. Input partner's username in the search bar and tap Search.
- Once the result appears, tap Add friend to send a request.
- Once the partner agrees, they will be listed in the Contacts tab.
Instant Messaging:
Tap a friend's photo to enter the chat screen. Use the on-screen keyboard for text, or tap icons for voice messages, emojis, or other options (File, Picture, Remote Diagnose, Camera).
Launch Remote Diagnosis (Scanner-To-Scanner):
The tool can initiate remote diagnosis with other diagnostic tools equipped with this module. On the function option selection screen, tap Remote Diagnostic.
- Request control remote device: Request to control partner's device.
- Invite remote diagnostic assistant: Invite a technician to perform remote control on your tool.
Launch Remote Diagnosis (Scanner-To-PC):
Users can also request remote control from a PC client technician.
- Slide the switch to ON to allow the PC client to connect.
- Choose the car model to be diagnosed.
- Notify the PC client technician of the website http://remote.x431.com. The technician will input their account, password, and your handset's serial number to start remote diagnosis.
Note: Ensure stable network signal and proper vehicle connection before processing remote diagnosis.
7.5 EV (Electric Vehicle) Diagnose
This function applies to new energy vehicles and includes vehicle diagnosis and battery pack detection. (Requires optional New Energy Vehicle Diagnosis Add-on Kit).
Vehicle Diagnosis
Manually diagnose electronic control systems of new energy vehicles. Operations are similar to local diagnosis.
Battery Pack Detection
Detects the battery pack of new energy vehicles via vehicle model or battery brand.
Procedure:
- Tap Battery Pack Detection.
- Select the vehicle model (e.g., BYD -> E5).
- Choose the desired BMS model.
- Select the preferred detection mode (Via OBD diagnostic interface, Via Jumper, Via Specific test adaptor) to start detection.
Note: Available detection modes vary by vehicle model/battery brand.
7.6 Service Function (Reset)
This section covers coding, reset, relearn, and other service functions to restore vehicle functionality after repair or replacement. Available tests vary by vehicle manufacturer, year, and model.
To perform a service function:
- Tap "Service Function".
- Choose the desired service function.
- Select the desired car brand.
- Select the reset mode (varies by vehicle).
- Follow the on-screen instructions.
7.7 Toolbox
The Toolbox provides access to various add-on modules, each requiring specific compatible hardware (sold separately).
- TPMS: Configures the tablet as a TPMS activation & diagnostic tool (requires TSGUN device).
- ADAS (Calibration): Calibrates camera-based & radar-based driver assistance systems (requires ADAS calibration tool).
- Oscilloscope: Diagnoses faults on automotive electronic equipment and wiring (requires Scopebox).
- Sensor Simulator: Diagnoses and simulates vehicle sensor faults (requires S2-2 Sensorbox).
- Videoscope: Checks unseen parts of the engine, fuel tank, braking system, etc. (requires Videoscope).
- BST360 (Battery Tester): Fixes battery detection (requires Bluetooth battery tester).
- Multimeter: Measures physical parameters like voltage, resistance, frequency (requires EM101N).
- Current Clamp: Performs AC/DC current and DC voltage tests (requires compatible current clamp).
- Insulation Tester: Measures insulation resistance, voltage, and other parameters.
- Immobilizer Programmer: Performs read-write functions for vehicle keys, EEPROM, MCU, and ECU (requires specific immobilizer programmer).
- Key Programmer: Identifies car key chips, generates chip models, reads remote control frequency, and generates remote devices (requires compatible key programmer).
7.8 Diagnostic Widget
This section provides access to various diagnostic utilities.
- Vehicle Coverage: Check supported vehicle models.
- CAN Bus Pin Detection: Detects voltage of OBD II diagnostic socket pins and supported protocol types.
- CANScope: Monitors vehicle CANBUS data, visualizes it, and helps analyze fault causes.
- Diagnostic Software Clear: Hides/clears infrequently used diagnostic software. Note: Removing software may completely delete it. To re-download, go to Software Update -> Available.
- Fix Connector Firmware/System: Upgrades and fixes VCI firmware/system. Do not cut power or switch interfaces during fixing.
- Data Stream Sample: Manages recorded data stream sample files.
- DLC Voltage Check: Checks vehicle battery to ensure system operates within limits.
- Reset MSVIN: Decodes VIN information of all ECUs and outputs inconsistent VINs.
- Diagnostic History: Records detailed diagnostic information for previously tested vehicles, allowing resumption from the last operation.
7.9 J2534 Reprogramming
J2534 reprogramming is a solution for various vehicle problems. The SmartLink C supports J2534 specifications for ECU reprogramming.
When used as a J2534 PassThru device, the SmartLink C works with a PC installed with OEM diagnostic software to perform J2534 reprogramming. The PC needs to have the LAUNCH J2534 tool installed, which can be downloaded from https://en.cnlaunch.com.
The connection for J2534 reprogramming involves connecting the SmartLink C device to a PC via a USB cable, and the SmartLink C device then connects to the vehicle's DLC.
8. Maintenance
8.1 General Care
- Keep the tool dry, clean, free from oil, water or grease.
- Use a mild detergent on a clean cloth to clean the outside of the tool when necessary.
- Store the tool and accessories in a locked area out of the reach of children.
- If the VCI (Vehicle Communication Interface) is not in use for a long period of time, it is suggested to unplug the VCI from vehicle’s DLC to conserve battery power.
8.2 Software Update
Regularly update the diagnostic software and application (APK) to ensure optimal performance and access to the latest vehicle models and functions.
Updating Diagnostic Software & APP:
- Go to Software Update on the Job Menu and tap the Downloaded tab.
- The Available tab lists software that can be updated, categorized as:
- Common software: Includes core diagnostic apps (cannot be deselected).
- Frequently used vehicle software: Diagnostic and Reset software.
- Other vehicle software: Rarely used software.
- Tap Update to start downloading. Software packages will install automatically after download.
Updating Frequently Used Software:
If you only want to update frequently used software, go to Software Update and tap the Downloaded tab.
Renew Subscription:
If your software subscription is due or expires, the system will prompt you to renew. Tap Renewal to open the Mall and follow the prompts.
8.3 Clear Cache
To clear the application cache:
- Tap Clear Cache.
- A pop-up window will appear. Tap OK to clear the cache and restart the App.
9. Troubleshooting (FAQ)
9.1 About the Diagnostic Tablet
How to save power?
- Turn off the screen while the tool is idle.
- Set a shorter standby time.
- Decrease the brightness of the screen.
- Turn off WLAN connection if not required.
Communication error with vehicle ECU?
Confirm the following:
- Is the VCI device correctly connected?
- Is the ignition switch ON?
- If all checks are normal, use the Feedback feature to send vehicle year, make, model, and VIN to support.
Failed to enter into vehicle ECU system?
Confirm the following:
- Is the vehicle equipped with this system?
- Is the VCI device correctly connected?
- Is the ignition switch ON?
- If all checks are normal, use the Feedback feature to send vehicle year, make, model, and VIN to support.
How to download the diagnostic app after resetting the tablet?
Note: Ensure network connection before registration.
- Launch the browser; the official Launch website (www.x431.com) should open.
- Tap Login, input username and password, then tap Log In.
- Confirm the serial number is correct, tap APP application program, and tap the Download icon.
- After download, follow on-screen instructions to install.
- After installation, use existing username/password to login and go to the update center to download diagnostic software.
What to do if the language of vehicle diagnostic software does not match the system language?
English is the default system language. After setting your preferred system language, go to the update center to download the corresponding vehicle diagnostic software. If it still displays in English, the software for the current language is under development.
How to retrieve the login password?
- Tap the application icon on the home screen.
- Tap Login on the upper right corner.
- Tap Retrieve password.
- Input product S/N and follow on-screen prompts.
9.2 About SmartLink Diag.
What network conditions are required for SmartLink Diag.?
Remote SmartLink Diag. operation requires a network broadband of 100MB or above.
What does “Delay” displayed on the SmartLink C screen mean?
"Delay" indicates network communication state. Different colors represent different delay statuses:
- Green: Shorter network delay, higher success rate for remote communication.
- Yellow: Medium network delay, medium success rate.
- Red: Longer network delay, lower success rate. Remote communication and ECU reprogramming operations are not suggested.
My network delay is too long.
Possible reasons:
- Greater distance between SmartLink B2.0/SmartLink B and SmartLink C V2.0 dongle.
- Too many network communication nodes.
- Poor network quality or slow data communication speed.
Some systems of some old vehicles cannot be tested.
The SmartLink C V2.0 dongle supports CAN2.0/CANFD/DoIP protocols. Some older vehicles use K-Line communication protocol, which may not be supported.
Is it necessary to re-ignite the car after the diagnostic system starts working?
For certain vehicle conditions, re-ignition can provide a more detailed analysis after OBD diagnosis.
10. User Tips
- Stay Updated: Regularly check for software updates to ensure compatibility with the latest vehicle models and access to new features. This is crucial for long-term usability.
- Verify Vehicle Coverage: Before starting a complex diagnostic task, confirm that your specific vehicle make, model, and year are fully supported by the tool's software.
- Network Stability for Remote Diagnostics: For SmartLink remote diagnosis, ensure a strong and stable internet connection (100MB or above) to avoid interruptions and ensure accurate data transfer.
- Consider Add-on Modules: If you frequently work with specialized tasks like TPMS, ADAS calibration, or key programming, investing in the compatible add-on modules can significantly expand the tool's capabilities.
- Utilize Diagnostic History: Make use of the diagnostic history feature to review past reports and resume previous diagnostic sessions without starting from scratch, saving time and effort.
- Check for Heavy Duty Software Compatibility: The tool is compatible with Heavy Duty software. If you work with trucks or commercial vehicles, ensure you have the necessary software and adaptors.
11. Warranty and Support
11.1 Warranty Information
LAUNCH electronic products are warranted against defects in materials and workmanship for one year from the date of delivery to the user.
This warranty does not cover parts that have been abused, altered, used for a purpose other than intended, or used in a manner inconsistent with instructions. The exclusive remedy for any defective automotive meter is repair or replacement. LAUNCH is not liable for consequential or incidental damages.
Final determination of defects will be made by LAUNCH according to established procedures. No agent, employee, or representative of LAUNCH has the authority to bind LAUNCH to any affirmation, representation, or warranty concerning LAUNCH automotive meters, except as stated herein.
11.2 Disclaimer
The above warranty is in lieu of any other warranty, expressed or implied, including any warranty of merchantability or fitness for a particular purpose.
11.3 Customer Service
If you have any questions on the operation of the unit, please contact the seller or customer service center:
- Website: https://en.cnlaunch.com
- Phone: +86 755 2593 8674
- Email: DOD@cnlaunch.com
Statement: LAUNCH reserves the rights to make any change to product designs and specifications without notice. The actual object may differ slightly from descriptions in the manual. LAUNCH does not bear any responsibility arising from misunderstandings.