ORIA BR10P Bluetooth 5.3 Audio Transmitter User Manual

Introduction

Thank you for purchasing the ORIA BR10P Wireless Bluetooth Transmitter. This device is designed to send audio signals wirelessly from non-Bluetooth devices such as TVs, computers, and CD players to Bluetooth receivers, headphones, or speakers. Enjoy a seamless wireless audio experience in your home or on the go.

For a detailed PDF version of this manual, please refer to the official product page or contact customer support.

Package Contents

Figure 1: Package Contents

• 1x ORIA BR10P Bluetooth Transmitter (Main device)
• 1x Type-C Charging Cable (1m length)
• 1x AUX Audio Cable (0.5m length)
• 1x AUX Adapter
• 1x User Manual
• 1x Storage Bag

Product Overview

Figure 2: Product Components

Component Identification:

• AUX Port (Audio Input Interface): 3.5mm jack for connecting to audio sources.
• Indicator Light 1 (Bluetooth 1): Indicates connection status for the first Bluetooth device.
• Indicator Light 2 (Bluetooth 2): Indicates connection status for the second Bluetooth device.
• Type-C Charging Interface: For charging the device.
• Multifunction Button (Switch Button): Used for power, pairing, and device search.
• Portable Lanyard: For easy carrying.

Setup and Initial Pairing

Follow these steps to set up your ORIA BR10P Bluetooth Transmitter and pair it with your audio devices.

Figure 3: Convenient Operation Steps

1. Power On: Long press the Multifunction Button for 3 seconds to turn on the device. The blue light of the button will remain on, and Indicator Light 1 and Indicator Light 2 will flash.
2. Connect Audio Source: Connect the audio source (e.g., TV, computer, CD player) to the AUX Port of the transmitter using the provided AUX audio cable or adapter.
3. Automatic Pairing (First Device): The transmitter will automatically search for and connect to nearby Bluetooth devices (e.g., Bluetooth headphones, Bluetooth speakers). Once the first device is successfully connected, Indicator Light 1 will remain steady on, and Indicator Light 2 will be off. The blue light of the Multifunction Button will turn off.
4. Pairing Second Device (Dual Connection): To connect a second Bluetooth device, click the Multifunction Button. Indicator Light 2 will flash and search for Bluetooth devices. After the second device is successfully connected, both Indicator Light 1 and Indicator Light 2 will remain steady on at the same time.

Note: If no device is connected within 20 seconds, the search will stop. To reconnect, click the Multifunction Button again.

Operating Instructions

Button Definition:

• Single Click: Searches for available Bluetooth devices.
• Double Click: Clears previously connected devices.
• Long Press (3 seconds): Powers the device on or off.

Automatic Shutdown:

The Bluetooth transmitter will automatically shut down if there is no device connection or other button operation within 10 minutes to conserve battery.

Dual Connection Feature:

Figure 4: Dual Connection for Shared Audio

The ORIA BR10P supports simultaneous connection to two Bluetooth headphones or speakers, allowing you to share audio with another person. Follow the pairing steps in the "Setup" section to connect both devices.

Transmitter Mode Usage:

Figure 5: Transmitter Mode with Desktop Computer

This device adds wireless audio transmission capabilities to non-Bluetooth devices. Simply plug the transmitter into the audio output of your TV, desktop computer, or CD player, and pair it with your desired Bluetooth audio receiver.

Charging and Battery Information

Figure 6: Battery Performance

• Charging: Connect the provided Type-C charging cable to the Type-C Charging Interface of the transmitter and a power source. The red light will be continuously on during charging and will turn off once fully charged.
• Low Battery Indicator: When the battery level is low, the red light will flash. The device will automatically shut down after 2 minutes.
• Battery Life: A full charge takes approximately 1 hour and provides up to 16 hours of continuous music playback.

Care and Maintenance

• Avoid using the product in dusty, humid environments, or areas with extremely high or low temperatures.
• Do not drop the product to prevent damage to its surface or internal components.
• Do not disassemble the product. Any unauthorized disassembly will void the warranty and may cause damage.
• Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.

Troubleshooting

Specifications

Figure 7: Bluetooth 5.3 Technology Enhancements

User Tips

• For optimal audio quality, ensure your Bluetooth receiving device (headphones/speakers) is within the 10-meter range and has a clear line of sight to the transmitter.
• If experiencing connection issues, try clearing the pairing history on both the transmitter and your Bluetooth receiving device before attempting to re-pair.
• Keep the transmitter charged to avoid interruptions during use, especially for long listening sessions.
• The compact size and included lanyard make it ideal for travel, particularly for use with in-flight entertainment systems or portable CD players.

Warranty and Support

This product is covered by a manufacturer's warranty. For any questions, technical support, or warranty claims, please contact your dealer or the ORIA Security Store directly. Do not attempt to repair the device yourself, as this may void the warranty.

You can find additional support and contact information on the official ORIA Security Store page.