UEEVII CPE688

Contents

UeeVii CPE688 Gigabit Wireless Bridge User Manual

Model: CPE688 | Brand: UEEVII

1. Introduction and Overview

The UeeVii CPE688 is a high-performance Gigabit Wireless Bridge designed for extending network connectivity over long distances. It operates on the 5.8GHz frequency band, offering a working distance of up to 5KM with a maximum bandwidth of 1000Mbps. Equipped with a 14dBi high-gain dual-polarization antenna, it supports Point-to-Point (PTP) and Point-to-Multipoint (PTMP) connections, as well as AP + Bridge operation modes. Its robust IP66 professional outdoor design ensures reliable performance in various environmental conditions.

Key features include:

  • High Speed: Dual 1000Mbps LAN ports with a maximum achievable network speed of 750Mbps between two paired bridges.
  • Long Range: Up to 5KM wireless data transmission, suitable for extending networks to distant buildings or monitoring ranges.
  • 5.8GHz Technology: Stronger anti-interference performance compared to 2.4GHz, ideal for outdoor use.
  • Easy Setup: Features a digital display for one-button pairing and configuration.
  • Outdoor Durability: IP66 waterproof rating for harsh weather conditions and 24V PoE power supply for simplified installation.

Video: UeeVii CPE688 Gigabit Wireless Bridge Product Overview.

2. Setup Guide

2.1 Package Contents

Before you begin, ensure all components are present:

  • 2 x UeeVii CPE688 Wireless Bridge Units
  • 2 x PoE Adapters
  • 2 x Ethernet Cables
  • Mounting Straps/Hardware
  • User Manual (this document)
UeeVii CPE688 package contents including two CPE units, PoE adapters, cables, and mounting straps.

Image: Contents of the UeeVii CPE688 package.

2.2 Physical Installation

The CPE688 units are designed for outdoor use and should be mounted in a location with a clear line of sight between the two units for optimal performance. Use the provided mounting straps to secure the units to poles or other suitable structures.

Ensure the units are positioned to minimize obstructions (trees, buildings) between them. The IP66 rating protects against dust and water ingress, making them suitable for various outdoor environments.

2.3 Wiring and Powering On

Each CPE688 unit requires power via a Power over Ethernet (PoE) adapter. Connect an Ethernet cable from the LAN port of the PoE adapter to your router/switch, and another Ethernet cable from the PoE port of the adapter to the LAN1/PoE port on the CPE688 unit. Plug the PoE adapter into a power outlet.

Detailed view of UeeVii CPE688 ports including LAN1/PoE, LAN2, DC, and the digital display with A-B button and Setting/Reset button.

Image: Close-up of the CPE688 unit's ports and controls.

The CPE688 features two 1000Mbps LAN ports (LAN1/PoE and LAN2) and a DC power input. The digital display shows the current mode (A for Transmitter, B for Receiver) and signal strength indicators (WLAN, LAN1, LAN2, PWR).

2.4 One-Button Pairing (Point-to-Point)

The CPE688 supports one-button pairing for easy Point-to-Point (PTP) setup:

  1. Power on both CPE688 units using their respective PoE adapters.
  2. Wait for the units to boot up.
  3. On the first unit (Master CPE), press the "A-B Button" until the digital display shows "A". This unit will act as the transmitter.
  4. On the second unit (Slave CPE), press the "A-B Button" until the digital display shows "B". This unit will act as the receiver.
  5. The units will automatically attempt to pair. Once paired, the WLAN signal lights on both units should indicate a successful connection.

For Point-to-Multipoint (PTMP) configurations, one unit acts as the Master (A) and multiple other units act as Slaves (B, B2, B3, etc.).

Diagram showing a point-to-point network extension setup between two buildings, connecting a router to a computer and phone via Master and Slave CPE units with PoE adapters.

Image: Point-to-point network extension to a second building.

Diagram illustrating point-to-point extended camera monitoring range, connecting a DVR and monitor to a camera via Master and Slave CPE units with switches and PoE adapters.

Image: Point-to-point extended camera monitoring range.

3. Operating Instructions

3.1 Network Extension

Once paired, the UeeVii CPE688 units create a transparent wireless bridge, effectively extending your local area network (LAN) to a remote location. Devices connected to the Slave CPE's LAN ports will be on the same network as devices connected to the Master CPE's network source (e.g., router).

This allows for high-speed wireless transmission of data, suitable for:

  • Connecting a second building to your main network.
  • Extending Wi-Fi coverage to outdoor areas like gardens, barns, or shops.
  • Establishing a dedicated link for IP cameras or other network devices.
UeeVii CPE688 units transmitting data wirelessly over 5km, with a Golden Gate Bridge in the background.

Image: Illustrates 5km wireless data transmission capability.

3.2 LED Indicators

The LED indicators on the CPE688 provide visual feedback on its status:

  • PWR (Power): Indicates if the device is powered on.
  • LAN1/LAN2: Indicate activity on the respective LAN ports.
  • WLAN (Wireless LAN): Indicates wireless signal strength and activity.

The digital display shows "A" for the Master unit (Transmitter) and "B" for the Slave unit (Receiver).

4. Maintenance

The UeeVii CPE688 is designed for minimal maintenance due to its robust IP66 outdoor rating. However, regular checks can help ensure optimal performance:

  • Physical Inspection: Periodically check the mounting and cables for any signs of wear, damage, or loose connections.
  • Line of Sight: Ensure that the line of sight between the two units remains clear of new obstructions (e.g., growing trees, new constructions).
  • Cleaning: If necessary, gently clean the exterior of the units with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials.
  • Firmware Updates: Check the manufacturer's website periodically for any available firmware updates to improve performance or security.

5. Troubleshooting

5.1 No Connection / Poor Signal

  • Check Power: Ensure both CPE units are powered on and their PWR indicators are lit.
  • Verify Pairing: Confirm that one unit is set to "A" (Master) and the other to "B" (Slave) using the digital display and A-B button.
  • Line of Sight: Ensure there is a clear, unobstructed line of sight between the two units. Any physical barrier can significantly degrade performance.
  • Distance: While rated for 5KM, extreme distances or environmental interference can affect performance. Try reducing the distance if possible for testing.
  • Cable Connections: Check all Ethernet cable connections between the CPE, PoE adapter, and network devices.

5.2 Slow Network Speed

  • Signal Strength: Check the WLAN signal indicators on the CPE units. A weak signal can lead to slower speeds. Adjust alignment if needed.
  • Interference: Operating on 5.8GHz helps, but other 5GHz devices or strong electromagnetic sources can still cause interference.
  • Network Congestion: Ensure your primary network (router, internet connection) is not the bottleneck.
  • Cable Quality: Use high-quality Ethernet cables, especially for longer runs.

5.3 Resetting the Device

If you encounter persistent issues, you can perform a factory reset. Locate the "Setting/Reset" button (often recessed) on the CPE unit. Use a paperclip or similar tool to press and hold the button for approximately 5-10 seconds until the indicators flash, then release. The device will reboot with factory default settings.

6. Specifications

The UeeVii CPE688 Gigabit Wireless Bridge offers the following technical specifications:

Comparison table of UeeVii Professional Outdoor CPE with other products, detailing CPU, Transmission Distance, Frequency Range, Interface, Antenna, Protocol Standard, Data Rate, and Protection Level.

Image: Detailed specifications and comparison.

Feature Specification
Brand Name UEEVII
Model CPE688
Type Wireless Bridge
Wi-Fi Supported Frequency 5G (5.8GHz)
5G Wi-Fi Transmission Rate 1000Mbps
Max. LAN Data Rate 1300Mbps
LAN Ports 2 (Gigabit)
Standards And Protocols Wi-Fi 802.11ac/ax (Note: Source data listed 802.11g, which is inconsistent with 5G/1000Mbps)
Antenna 14dBi Dual-Polarization
Transmission Distance Up to 5KM (3 Miles)
Protection Level IP66, 2KV lightning protection
With Modem Function No
Power Supply 24V PoE

7. User Tips

  • Confirm Quantity: The UeeVii CPE688 is sold as a pair of units, which are required for a point-to-point or point-to-multipoint connection. Ensure you have two units for your setup.
  • Starlink Integration: This wireless bridge can be effectively paired with a Starlink router to extend internet coverage to remote outbuildings or areas on your property that Starlink's Wi-Fi might not reach directly.
  • Optimal Placement: For the best performance, always aim for a clear line of sight between the two CPE units. Even minor obstructions can impact signal quality and speed.
  • Digital Display: Utilize the digital display for quick verification of the Master/Slave mode (A/B) and to monitor signal strength during setup and operation.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official UeeVii website or contact their customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.