Product Overview
This document provides essential information for the safe and efficient use of your 14.8V 800mAh Li-Ion replacement battery, designed for various HUTT window cleaning robot models. Please read this manual thoroughly before installation and use.
Specifications
| Feature | Detail |
|---|---|
| Battery Type | Rechargeable Li-Ion Standard Battery |
| Nominal Voltage | 14.8V |
| Capacity | 800mAh |
| Energy | 11.84Wh |
| Rechargeable | Yes |
| Compatible Use | HUTT Window Cleaning Robots (W55, W66, DDC55, DDC51, DDC5, C6) |
| Model Numbers | 443048-4S, G104, PL443048-4S |
| Origin | Mainland China |
| Certifications | CE, FCC, RoHS, UL, KC, WEEE |
| Dimensions (Approx.) | Length: 16 cm, Width: 13 cm, Height: 3 cm |
| Weight (Approx.) | 83 grams |
Installation
This battery is designed as a replacement for specific HUTT window cleaning robot models. Refer to your robot's original user manual for detailed instructions on how to safely access and replace its internal battery. General steps typically include:
- Ensure the window cleaning robot is powered off and disconnected from any power source.
- Locate the battery compartment on your robot. This may require removing screws or a cover.
- Carefully disconnect the old battery from its connector.
- Insert the new 14.8V 800mAh Li-Ion battery into the compartment, ensuring proper orientation.
- Connect the battery's white connector securely to the robot's battery port.
- Close the battery compartment and secure any screws or covers.
- Charge the new battery fully before its first use (refer to "Battery Care and Usage").
Battery Care and Usage
To maximize the lifespan and performance of your battery, please follow these guidelines:
- Initial Charge: Charge the battery fully before using it for the first time to ensure optimal performance.
- Regular Charging: For best results, recharge the battery before it is completely drained. Avoid overcharging by using a smart charger that automatically stops when the battery is full.
- Storage: If you do not plan to use the battery for an extended period, store it in a cool, dry place at about 50% charge. This helps maintain battery health and longevity.
- Avoid Extremes: Do not expose the battery to extreme temperatures, both hot and cold, as this can reduce its capacity and lifespan.
- Clean Contacts: Ensure the battery contacts and the device's contacts are clean and free from debris to maintain a good connection and efficient power transfer.
Safety Information
Please observe the following safety precautions to prevent damage to the battery, your device, and to avoid personal injury:
- Physical Integrity: Do not attempt to open, crush, puncture, or incinerate the battery. Doing so can lead to fire, explosion, or leakage of hazardous materials.
- Temperature: Do not expose the battery to direct sunlight, heat sources, or extreme cold. Optimal operating temperature is typically between 0°C and 45°C (32°F and 113°F).
- Water Exposure: Keep the battery dry. Do not immerse it in water or other liquids.
- Children and Pets: Keep the battery out of reach of children and pets to prevent accidental ingestion or damage.
- Disposal: Dispose of used batteries according to local regulations. Do not dispose of batteries in household waste.
- Damage: If the battery appears damaged, swollen, or is leaking, discontinue use immediately and dispose of it safely.
Troubleshooting
If you encounter issues with your battery, consider the following common troubleshooting steps:
- Robot Not Powering On: Ensure the battery is correctly installed and fully charged. Check the robot's power button and connections.
- Battery Not Charging: Verify that the charging cable and adapter are working correctly. Ensure the battery contacts and charging port on the robot are clean and free of debris.
- Reduced Operating Time: Battery capacity can decrease over time with usage. Ensure the battery is fully charged before each use. Extreme temperatures can also temporarily affect performance.
- Loose Connection: If the robot intermittently loses power, check that the battery connector is firmly seated.
If problems persist, consult your robot's original manual or contact customer support.
User Tips
- Check Compatibility: Before purchasing or installing, always double-check that the battery's voltage, capacity, and physical dimensions match your robot's requirements.
- First Use: Always perform a full charge cycle on a new battery before its initial use to calibrate it and ensure maximum performance.
- Regular Cleaning: Periodically clean the battery contacts and the robot's battery compartment with a dry, soft cloth to prevent corrosion and ensure efficient power transfer.
Warranty and Support
Your satisfaction is our priority. While specific warranty details are not provided in this document, if you have any questions or encounter any issues with your battery, please contact the seller or manufacturer immediately. We are dedicated to resolving any problems quickly and effectively.







