SANDA 3167 Dual Display Sport Watch User Manual

1. Introduction

Thank you for choosing the SANDA 3167 Dual Display Sport Watch. This manual provides detailed instructions for the proper use, setup, and maintenance of your watch. Designed for durability and functionality, this watch combines analog and digital displays with multiple features suitable for sports and daily wear.

Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece.

2. Product Overview

The SANDA 3167 features a robust design with a zinc alloy case and a comfortable TPU strap. It offers both analog and digital timekeeping, along with various functions accessible via its four control buttons.

Key Components:

• Luminous Button (Top Left): Activates the backlight.
• Mode Button (Bottom Left): Cycles through different modes (Time, World Time, Stopwatch, Countdown, Alarm).
• Reset Button (Top Right): Used for resetting functions or navigating settings.
• Start Button (Bottom Right): Used for starting/pausing functions or increasing values during setting.
• Week Display: Shows the current day of the week.
• Time Display: Digital display for time, date, and other mode-specific information.
• Analog Hands: Traditional hour and minute hands for analog time display.

3. Specifications

4. Setup

Before using your watch, you may need to set the time, date, and other preferences. Refer to Figure 1 for button identification.

4.1 Setting Digital Time and Date

1. In normal time display mode, press the MODE button repeatedly until you reach the time setting mode (usually indicated by flashing digits).
2. Press the RESET button to select the digit you wish to adjust (e.g., seconds, hour, minute, month, day, year).
3. Use the START button to increase the selected value. Hold the START button for faster adjustment.
4. Continue pressing RESET and START until all desired settings are configured.
5. Press the MODE button to exit the setting mode and return to normal time display.

4.2 Adjusting Analog Hands

The analog hands are typically synchronized with the digital time. If they are out of sync, you may need to adjust them manually. This watch model features an automatic synchronization or a manual adjustment via a crown (not explicitly shown but common for dual display watches) or through digital settings.

Note: Some models allow analog hand adjustment through the digital setting mode. If the analog hands are not automatically synchronized, enter the digital time setting mode and look for an option to adjust analog time or synchronize hands. Use the START and RESET buttons as guided by the digital display.

For a visual guide on setting the watch, please refer to the product video:

5. Operating Instructions

Your SANDA 3167 watch offers a variety of functions. Use the MODE button to cycle through them.

5.1 Time Mode (Normal Display)

This is the default mode, displaying the current time, date, and day of the week. The watch supports both 12-hour and 24-hour formats, which can be toggled in the time setting mode.

5.2 Stopwatch Mode

1. Press MODE until "STW" or "STOP" appears on the digital display.
2. Press START to begin timing.
3. Press START again to pause timing.
4. Press RESET to clear the stopwatch to zero.
5. To resume timing after pausing, press START.

5.3 Alarm Mode

The watch supports up to five alarms. In alarm mode, you can set and activate alarms.

1. Press MODE until "ALM" appears on the digital display.
2. Press RESET to select the alarm number (e.g., AL1, AL2).
3. Hold RESET to enter alarm setting mode (digits will flash).
4. Use START to adjust the hour and minute.
5. Press RESET to move between hour and minute settings.
6. Press MODE to confirm and exit alarm setting.
7. To activate/deactivate an alarm, press START while in alarm mode (not setting mode). An alarm icon will appear/disappear.

5.4 Countdown Mode

Set a countdown timer for specific activities.

1. Press MODE until "TMR" or "CD" appears on the digital display.
2. Hold RESET to enter countdown setting mode.
3. Use START to set the desired countdown time (up to 60 minutes).
4. Press RESET to move between hour/minute/second settings if applicable.
5. Press MODE to confirm and exit setting.
6. Press START to begin the countdown.
7. Press START again to pause. Press RESET to reset.

5.5 World Time Mode

View the time in different time zones (30 cities/time zones available).

1. Press MODE until "WT" or "WORLD" appears.
2. Use START to cycle through different time zones.

5.6 Backlight Function

Press the LIGHT button (top left) to illuminate the digital display and analog hands for easy reading in low-light conditions. The watch also features luminous hands for passive glow.

5.7 Shock Resistance

The SANDA 3167 is designed with shock-resistant features, making it suitable for various activities. However, avoid excessive impact to prevent damage.

6. Maintenance

Proper care will ensure the longevity and optimal performance of your SANDA 3167 watch.

6.1 Water Resistance (50M / 5ATM)

Your watch is water-resistant up to 50 meters (5 ATM). This means it is suitable for daily use, showering, and swimming in shallow water. It is not suitable for diving, snorkeling, or high-pressure water activities.

• Do not operate buttons underwater.
• Avoid exposing the watch to hot water or steam, as this can compromise the water-resistant seals.
• If the watch is exposed to saltwater, rinse it thoroughly with fresh water and dry it with a soft cloth.

6.2 Cleaning

Wipe the watch case and strap regularly with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and mild soap, then rinse with clean water and dry thoroughly.

6.3 Battery Replacement

The watch uses a MAXELL battery. When the display dims or functions become erratic, it may be time for a battery replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure the water resistance is maintained.

6.4 Storage

When not in use for extended periods, store your watch in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Troubleshooting

If you encounter issues with your SANDA 3167 watch, please refer to the following common solutions:

• Digital Display is Blank or Dim:
  • Check if the battery needs replacement.
  • Ensure the watch is not in a power-saving mode (if applicable).
• Analog Hands Not Moving or Incorrect:
  • Verify the digital time is set correctly.
  • Attempt to re-synchronize the analog hands through the digital setting mode as described in Section 4.2.
  • If the issue persists, a battery replacement might be needed, or there could be a mechanical issue requiring professional service.
• Buttons Not Responding:
  • Ensure the watch is not wet or submerged when operating buttons.
  • Check for any debris or obstruction around the buttons.
• Water Inside the Watch:
  • Immediately take the watch to a professional watch repair service. Do not attempt to open it yourself, as this can cause further damage and void any potential warranty.

8. User Tips

• Regular Cleaning: A quick wipe down after heavy use, especially after swimming, can prevent residue buildup and keep your watch looking new.
• Button Operation: Always ensure the watch is dry before pressing any buttons to maintain water resistance.
• Backlight Use: Use the backlight sparingly to conserve battery life.
• Strap Comfort: The TPU strap is designed for comfort. Adjust it to a snug fit without being too tight to allow for air circulation.

9. Warranty and Support

For any issues not covered in this manual or for warranty claims, please contact the seller or authorized service center. Keep your purchase receipt as proof of purchase.