1. Introduction
The Miboxer FUT100 is a sophisticated 2.4GHz 100-Zone Group RGB+CCT Touch Remote designed for controlling various MiBoxer/Mi-Light 2.4G series LED lighting products. This remote offers precise control over color, brightness, color temperature, and saturation, along with advanced features like group control, dynamic modes, and a child lock. It is an ideal solution for managing complex LED lighting setups with ease.
Key Features:
- 100-Zone Group RGB+CCT Touch Remote control.
- 2.4G RF wireless transmission technology for reliable control.
- Compatible with MiBoxer/Mi-Light 2.4G series products.
- Offers 16 million colors to choose from.
- Adjustable brightness, color temperature, and saturation.
- LCD display shows dimming data in real-time.
- Supports saving 3 favorite colors or dynamic modes (requires lamp version 2.0 or higher).
- Child lock design to prevent accidental changes.
- One-click copying function for easy remote duplication.
2. Setup
2.1. Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide open the battery cover.
- Insert two AAA (3V) dry cell batteries, ensuring correct polarity (+/-).
- Close the battery cover securely.
2.2. Wall Mount Installation
The remote comes with a wall mount bracket and screws for convenient storage and access.
- Choose a suitable location on a wall, away from wide-range metal objects or strong electromagnetic fields.
- Use the provided screws and wall anchors to securely attach the wall mount bracket to the wall.
- Place the remote control into the mounted bracket.
2.3. Linking Code Instructions (Pairing with Lights)
To control your LED lights, the remote must be linked to them. Ensure the lamp is powered off before starting.
- Switch off the light you wish to link.
- After 10 seconds, switch the light on again.
- Within 3 seconds of switching the light on, short press the 'I' button (Zone ON/Link/Unlink) on the remote 3 times.
- The light will blink 3 times slowly, indicating successful linking.
Note: If linking fails and the light does not blink slowly, please repeat the steps. A light that has already been linked cannot be linked again to the same zone.
2.4. Unlinking Code Instructions
To unpair the remote from a light, follow these steps:
- Switch off the light you wish to unlink.
- After 10 seconds, switch the light on again.
- Within 3 seconds of switching the light on, short press the 'I' button (Zone ON/Link/Unlink) on the remote 5 times.
- The light will blink 10 times quickly, indicating successful unlinking.
Note: If unlinking fails and the light does not blink quickly, please repeat the steps. A light that hasn't been linked does not need to be unlinked.
3. Operating Instructions
The FUT100 remote features an intuitive touch interface and an LCD display for real-time feedback.
3.1. Button Description and LCD Display
| Feature | Description |
|---|---|
| LCD Display | Shows current zone, RGB/CCT figure, brightness (DIM%), saturation (SAT%), battery power, dynamic mode, and current scene. |
| RGB Slider | Touch to adjust light colors (16 million colors). |
| Saturation/CCT Slider | Adjusts color saturation or color temperature (CCT) in white light mode. |
| Brightness Slider | Adjusts the brightness of the lights. |
| ON / OFF | Master ON / Master OFF for all zones. |
| W (White Mode) | Short press to switch to white light mode. |
| ▲ / ▼ (Page Up / Page Down) | Short press to page up/down through zones (5 zones per page). Long press for quick page turning. |
| 🔒 / 📋 (Child Lock / Copying) | Long press for 3 seconds to lock/unlock child lock. Short press 5 times quickly to enter copying mode. |
| I / O (Zone ON / Zone OFF) | Short press 'I' to turn on current zone. Long press 'I' to get max brightness for current zone. Short press 'O' to turn off current zone. Long press 'O' to get night light mode for current zone. |
| S- / S+ (Mode Speed) | Adjusts the speed of dynamic modes. |
| M (Dynamic Mode Switch) | Short press to switch between dynamic modes. |
| 1, 2, 3 (Save Scene) | Short press to activate saved scene. Long press for 3 seconds to save current color or dynamic mode (light flashes once slowly upon successful save). |
3.2. Group Control Instruction
The FUT100 allows you to pair multiple lights into different groups (zones) for flexible control. Each light can only be paired with one sub-zone from any remote.
To control a group, first select the desired zone using the page up/down buttons, then use the 'I' (Zone ON) button to activate it, and proceed with dimming or color adjustments.
3.3. Copying Instruction
The remote supports copying settings from another 2.4G series remote. This function allows you to quickly duplicate the ID and functions of an existing remote.
- Quickly press the 'ON' button 5 times to enter copying mode. The LCD screen will display '00' and a 10-second countdown will begin.
- Within the 10-second countdown, short press any button on the 2.4G series remote you wish to copy.
- The screen will display '00' again, indicating that copying is done successfully.
Note: You can only copy one 2.4G remote at a time. Copying again will overwrite the previously copied remote.
To dismiss copying mode: Quickly press the 'ON' button 10 times. The '00' on the screen will flash 3 times, indicating successful dismissal.
4. Maintenance
4.1. Battery Replacement
When the lights blink quickly, it indicates that the remote's battery is low and needs replacement. Follow the battery installation steps in Section 2.1 to replace the AAA batteries.
4.2. Cleaning and Care
- Keep the remote control dry. Do not use it in humid environments or areas with high temperatures.
- Clean the remote with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Avoid exposing the remote to static electricity.
- Do not use poor quality batteries, as they may leak and damage the remote.
5. Troubleshooting
5.1. Light Not Responding to Remote
- Check Battery: Ensure the batteries are correctly installed and have sufficient charge. Replace if necessary.
- Re-link Light: If the light is not responding, try unlinking and then re-linking the light to the remote as described in Sections 2.3 and 2.4.
- Compatibility: Verify that your LED lamps are MiBoxer/Mi-Light 2.4G series products. This remote is not compatible with other systems (e.g., Zigbee).
- Obstructions: Ensure there are no wide-range metal objects or strong electromagnetic interference between the remote and the light, as this can affect the 2.4GHz signal. The remote has a control distance of 30m in barrier-free space.
5.2. Linking/Unlinking Failure
- Ensure the timing for pressing the 'I' button (3 times for linking, 5 times for unlinking) is precise and within 3 seconds of turning the light on.
- Confirm the light was completely off for at least 10 seconds before turning it back on for the linking/unlinking procedure.
6. Specifications
| Parameter | Value |
|---|---|
| Product Name | 100-Zone RGB+CCT Remote |
| Model No. | FUT100 |
| Working Voltage | 3V (AAA*2PCS) |
| Standby Power Consumption | 20uA |
| Transmitting Power | 6dBm |
| RF | 2.4GHz |
| Control Distance | 30m (Barrier-free space) |
| Transmission Frequency | 2400-2483.5MHz |
| Modulation Method | GFSK |
| Working Temperature | -10~40°C |
| Applicable Lights | Single color CCT RGB RGBW RGB+CCT Lamps led strip Series controller |
7. Warranty and Support
The Miboxer FUT100 remote control comes with a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical support or further assistance, please contact your retailer or the official Miboxer support channels.
8. User Tips
- Compatibility Check: Always ensure your LED lights are part of the MiBoxer/Mi-Light 2.4G series. This remote is specifically designed for this ecosystem and is not compatible with other wireless protocols like Zigbee.
- Optimal Performance: For best control distance and signal reliability, avoid placing the remote or controlled lights near large metal structures or other devices that emit strong electromagnetic waves.
- Battery Quality: Use high-quality AAA batteries to prevent leakage and ensure consistent performance.
