Erilles Mazda 3 2004-2013 Car Radio

Contents

Erilles Android Car Stereo Multimedia Player User Manual

Model: Mazda 3 2004-2013 Car Radio

Brand: Erilles

1. Introduction

Thank you for choosing the Erilles Android Car Stereo Multimedia Player. This advanced system is designed to enhance your driving experience with a wide range of features including navigation, entertainment, and connectivity. This manual provides essential information for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

2. Safety Information

  • Always operate the device responsibly and in accordance with local traffic laws.
  • Do not attempt to install or repair the unit if you are not qualified. Improper installation can lead to damage or injury.
  • Ensure all wiring is correctly connected to prevent short circuits or electrical hazards.
  • Keep the screen clean and free from obstructions to maintain clear visibility.
  • Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.

3. Package Contents

Please check the package for the following items:

  • Erilles Android Car Stereo Head Unit
  • Power Harness and CAN-Bus Decoder (if applicable for your vehicle model)
  • GPS Antenna
  • USB Cables
  • External Microphone
  • Installation Tools
  • 1080P AHD Camera (Optional/Included with certain configurations)
  • User Manual (this document)

Note: Specific accessories may vary based on the purchased configuration.

4. Setup and Installation

4.1 Vehicle Compatibility

This multimedia player is designed for Mazda 3 models from 2004 to 2013. Please ensure your vehicle's dashboard matches the installation diagrams provided.

Important Note for 2004-2005 Mazda 3: This product does NOT support the small screen displays found in the center consoles of 2004 and 2005 Mazda 3 cars. If your vehicle has this small screen, this unit is not compatible.

4.2 Installation Overview

Installation typically involves removing the factory radio, connecting the new head unit using the provided wiring harness, and securing it in place. Professional installation is recommended.

Mazda 3 2004-2009 Dashboard Before and After Installation
Figure 4.1: Dashboard comparison for Mazda 3 (2004-2009) before and after head unit installation.
Mazda 3 2010-2012 Dashboard Before and After Installation
Figure 4.2: Dashboard comparison for Mazda 3 (2010-2012) before and after head unit installation.

4.3 Wiring Connections

Connect the main power harness, CAN-Bus decoder (if included), GPS antenna, and USB cables to the corresponding ports on the head unit and your vehicle's wiring system. Ensure all connections are secure.

Wiring harness and CAN-Bus decoder for installation
Figure 4.3: Example of wiring harness and CAN-Bus decoder connections.

4.4 Cooling System Installation

The unit features a powerful cooling fan to maintain optimal operating temperatures. Ensure proper airflow around the unit during installation.

Diagram illustrating the powerful cooling fan system and its temperature regulation.
Figure 4.4: Powerful Cooling Fan diagram.

4.5 Optional 360 Panoramic Camera

If you have purchased the optional 360 panoramic camera, it integrates with the head unit to provide a bird's-eye view for safer driving and easier reversing. The 360 feature chip must be installed in the radio during manufacturing, so ensure it was ordered together with the radio.

Illustration of the optional 360 Bird View Camera system for safer driving and reversing.
Figure 4.5: 360 Bird View Camera system overview.

5. Operating Instructions

5.1 Initial Power-On and System Overview

After successful installation, turn on your vehicle's ignition. The unit will boot up to the Android home screen. The system runs on Android 15 and is powered by a Qualcomm 8-core processor, offering high performance and a responsive user interface.

Front view of the Android Car Stereo unit with Android 15 and Qualcomm Snapdragon branding.
Figure 5.1: Erilles Android Car Stereo Head Unit.
Detailed view of the Qualcomm 8-Core CPU with RAM:12G and ROM:256G specifications.
Figure 5.2: Qualcomm 8-Core CPU details.

5.2 Connectivity (WiFi, 4G LTE, Bluetooth)

  • WiFi Connection: Connect to available Wi-Fi networks for internet access, app downloads, and online services.
  • 4G LTE (Optional): If your unit has built-in 4G LTE, insert a SIM card to access cellular networks anytime, anywhere.
  • Bluetooth: Pair your smartphone via Bluetooth 5.2 for hands-free calling, audio streaming, and faster data transmission.
Visual representation of key features: WiFi connection, GPS navigation, reverse camera input, and steering wheel control.
Figure 5.3: WiFi, GPS, Reverse Camera, Steering Wheel Control features.
Visual representation of key features: Bluetooth connectivity, AM/FM/RDS radio, and DSP sound processing.
Figure 5.4: Bluetooth, AM/FM/RDS, DSP features.
Diagram showing built-in 4G/WiFi functionality with SIM card slot and app icons.
Figure 5.5: Built-in 4G/WiFi functionality.

5.3 Navigation (GPS)

The unit features a built-in global positioning system (GPS, BDS, GLONASS support) for omni-directional map display and real-time traffic conditions. Download and install your preferred navigation apps from the app store.

Visual of Dual-frequency GPS navigation with map display.
Figure 5.6: Dual-frequency GPS navigation.

5.4 CarPlay & Android Auto

The unit supports both wireless CarPlay and Android Auto. You can connect your smartphone via wired USB or wireless WiFi for seamless integration of your phone's features onto the car stereo display.

Illustrates wireless CarPlay & Android Auto connectivity options (wired USB or wireless WiFi) and Mirror Link feature.
Figure 5.7: Wireless CarPlay & Android Auto and Mirror Link.

5.5 Audio Features (DSP, AM/FM/RDS)

  • DSP Sound Effect: Enjoy a superior auditory experience with the 32-band DSP (Digital Signal Processor) and DTS+RDS+DTS Velvet Sound technology, offering sound field correction and immersive audio.
  • AM/FM/RDS Radio: Tune into your favorite radio stations with clear reception and RDS (Radio Data System) support.

5.6 Display Features (QLED, Split Screen, Custom Home Page)

  • QLED Display: The QLED screen offers a resolution of up to 2000*1200 (optional), providing ultra-clear, delicate, rich, and vivid images.
  • Split Screen: Utilize two applications simultaneously on one screen for enhanced multitasking.
  • Custom Home Page: Personalize your home screen with your favorite apps and widgets.
Displaying QLED screen quality, split-screen functionality, and custom home page app interface.
Figure 5.8: QLED Display, Split Screen, and Custom Home Page.

5.7 Steering Wheel Control

The head unit supports your vehicle's steering wheel controls (SWC), allowing you to manage music playback and hands-free calls safely without taking your hands off the wheel.

5.8 Voice Control (Optional)

All models support custom voice control, which can be purchased separately to enrich your driving experience with hands-free commands.

5.9 HDMI Output

The unit features an HDMI output for extended rear-seat entertainment, allowing passengers to enjoy content on external screens.

Diagram showing HDMI Extended output for rear-seat entertainment.
Figure 5.9: HDMI Extended Output.

5.10 Button Lights

The unit features multiple color RGB button lights that can be customized to match your vehicle's interior or your personal preference.

6. Maintenance

  • Screen Cleaning: Use a soft, lint-free cloth to clean the screen. For stubborn smudges, lightly dampen the cloth with water or a screen-safe cleaner. Avoid harsh chemicals.
  • General Cleaning: Wipe the unit's exterior with a soft, dry cloth. Do not use abrasive cleaners.
  • Software Updates: Periodically check for software updates to ensure optimal performance and access to new features. Follow the on-screen instructions for updates.
  • Avoid Liquids: Prevent liquids from entering the unit, as this can cause severe damage.

7. Troubleshooting

  • No Power: Check all power connections and fuses. Ensure the vehicle's ignition is on.
  • No Sound: Verify speaker connections. Check volume levels and audio settings (DSP, equalizer). Ensure the correct audio source is selected.
  • Touch Screen Unresponsive: Try restarting the unit. If the issue persists, a factory reset might be necessary (note: this will erase all user data).
  • GPS Not Working: Ensure the GPS antenna is properly connected and has a clear view of the sky. Check navigation app settings.
  • Bluetooth Connectivity Issues: Ensure Bluetooth is enabled on both the head unit and your phone. Delete previous pairings and try reconnecting.
  • CarPlay/Android Auto Not Connecting: Check USB cable connection (if wired) or WiFi connection (if wireless). Ensure the phone's software is up to date.
  • Steering Wheel Controls Not Working: Verify CAN-Bus decoder connection and ensure SWC settings are correctly configured in the unit's menu.

If you encounter persistent issues not covered here, please contact customer support.

8. Specifications

FeatureSpecification
Operating SystemAndroid 15
ProcessorQualcomm 8-Core (2.0-2.5 GHz)
Chipset7862/TS10/T5
RAM (Memory)2GB / 4GB / 6GB / 8GB / 12GB (Configurable)
ROM (Storage)32GB / 64GB / 128GB / 256GB (Configurable)
Max External Memory256GB
Display Size9 inches
Display TypeQLED Touch Screen
Resolution1280*720 or 2000*1200 (Optional)
Output Power4*45W
Voltage12 V
Tuner TypeDSP, FM/AM, RDS
Bluetooth VersionBT 5.2 (Qualcomm BT Technology)
ConnectivityBuilt-in WiFi, Optional 4G Network Support (SIM card slot)
GPS SupportBuilt-in GPS, BDS, GLONASS (Dual-frequency)
Special FeaturesCarPlay, Android Auto, Mirror Link, Reversing Input, Split Screen, Steering Wheel Control, Built-In Speaker/Microphone, DSP, HDMI Output, Can-Bus Support
Digital Media FormatMp3, MP4, WMA, JPEG
OSD LanguageMulti-language support (including English, Spanish, French, German, etc.)
Item Weight2.0 kg
Package Dimensions (L x W x H)33 cm x 27 cm x 11 cm
CertificationCE
MaterialQLED+ABS

9. User Tips

  • Pre-Installation Check: Before fully installing the unit into the dashboard, connect all wires and test basic functions (power, audio, touch screen, reverse camera) to ensure everything is working correctly.
  • Wiring Verification: Double-check all wiring connections, especially the CAN-Bus decoder, to ensure proper communication with your vehicle's systems like steering wheel controls.
  • Software Updates: Regularly check for and install software updates to benefit from performance improvements, bug fixes, and new features.
  • App Management: To maintain optimal performance, periodically close unused background applications and clear cache data.
  • GPS Antenna Placement: For best GPS reception, ensure the GPS antenna is mounted in a location with a clear view of the sky, away from metal obstructions.

10. Warranty and Support

This product comes with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or the manufacturer's customer service. Refer to your purchase documentation for contact details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.