1. Introduction and Overview
The MASTFUYI FY8912A Battery Tester is a specialized tool designed for measuring the performance of starter lead-acid batteries, including their performance during vehicle starting, charging, and electrical load processes. This instrument features a simple design, accurate measurements, and a rich set of functions displayed clearly on a large lattice screen.
It applies a four-wire measurement method combined with a self-developed core circuit and software algorithm to achieve accurate measurements, powerful protection features, and bad contact reminders, ensuring safe and reliable operation.
Key Functions:
- Detects internal resistance
- Measures voltage
- Determines discharge current
- Checks battery power level
- Estimates battery lifespan
2. Safety Rules and Precautions
Always read and follow these safety instructions carefully before using the tester to prevent damage to the instrument or personal injury.
- Operate this tester strictly according to this manual. Any operations that do not follow the rules may damage the tester.
- Before use, inspect the wire clamps of the test fixture for damage, exposed metal wires, or breaks. Do not use if damaged.
- Do not store the tester in corrosive, high-temperature, high-humidity, flammable, explosive, strong static field, or magnetic field environments.
- Do not casually dismantle or repair this meter, as this may damage it or affect safety.
- Wear appropriate personal protective equipment (e.g., eye protection) when testing to avoid eye damage or personal injury.
- Do not place this tester on the hood of the car or near the exhaust pipe to prevent heat damage.
- When testing batteries, pay attention to all warnings, maintenance precautions, and procedures on the corresponding battery labels.
3. Product Overview
3.1. Panel Instructions

Image: Front view of the MASTFUYI FY8912A showing LCD screen, control buttons, and test clips.
- LCD Screen: Displays test results and menu options.
- RST (Reset) Button: Returns to the initial power-on P1 state.
- ESC (Escape) Button: Returns to the previous step/menu.
- OK (Confirm) Button: Confirms selection or proceeds to the next step.
- Up/Down Buttons (Arrows): Navigate through menu options or adjust values.
- Test Clips: Red clip for positive terminal, black clip for negative terminal.
3.2. Multi-functional Analyser Features

Image: Overview of the tester highlighting its multi-functional capabilities.
- SOC (State of Charge): Indicates the current charge level of the battery.
- SOH (State of Health): Assesses the overall health and capacity of the battery.
- Resistance Test: Measures the internal resistance of the battery.
- Voltage Test: Displays the current voltage of the battery.
- Discharging Test: Evaluates battery performance under discharge conditions.
- 3.47 Inch HD Screen: Provides clear and easy-to-read results.
- Polarity Reverse Protection: Protects the device and battery from damage if connected incorrectly.
- CCA (50-2000 CCA): Measures Cold Cranking Amps, a key indicator of battery starting power.
- Plug and Play: Easy to use with minimal setup.
3.3. Product Demonstration Video
Video: Official product demonstration showing connection and basic operation.
3.4. What's in the Box

Image: Contents of the product package.
The product package typically includes:
- MASTFUYI FY8912A Battery System Tester
- User Manual
- Test Cables with Alligator Clips (Red and Black)
- Storage Pouch/Case
4. Setup
4.1. Connecting the Test Clips
- Ensure the vehicle engine is off and the ignition is in the OFF position.
- Connect the RED test clip to the POSITIVE (+) terminal of the battery.
- Connect the BLACK test clip to the NEGATIVE (-) terminal of the battery.
- Ensure a secure and clean connection. Poor contact can lead to inaccurate readings or error messages. The tester has a poor contact warning feature.
4.2. Initial Power-On
Once the clips are correctly connected, the tester screen will light up automatically, entering the P1 state, ready for operation.
5. Operating Instructions
The tester supports various battery types and standards:

Image: Compatible battery types: Regular Flooded, AGM, GEL, EFB.

Image: Applicable battery standards: CCA, DIN, EN, SAE, IEC, AH.
5.1. Battery Test (Quick Test / Precise Test)
There are two ways to perform a Battery Test: a Quick Test and a Precise Test.
- Quick Test: If the cold cranking ampere range of the named battery is not available, enter the battery capacity to test.
- Precise Test: Enter the cold cranking ampere standard parameter of the named battery, and use this as the basis for diagnosing the battery.
Testing Process:
- Step 1 (P1 State - Battery Type Selection):
After powering on, the display enters the P1 state. Use the Up and Down buttons to select the battery type. Choose from: Normal, AGM, GEL, or EFB. Press OK to proceed. - Step 2 (P2 State - Test Standard Selection):
The display enters the P2 state. Use the Up and Down buttons to select the test standard. Choose from: CCA (Cold Start Current), DIN (German Standard), EN (European Standard), SAE (American Standard), IEC (International Electrotechnical Code), or AH (Starting Current). Press OK to proceed. - Step 3 (P3 State - Maximum Discharge Current Setting):
The display enters the P3 state. Use the Up and Down buttons to adjust the maximum discharge current of the battery under test (long press for continuous adjustment). After setting, press OK to enter the P4 measurement state. - Step 4 (P4 State - Measurement and Results):
The display enters the P4 measurement state. After approximately 2-3 seconds, the measurement results will be displayed. Use the Up and Down buttons to view different data: internal resistance, voltage, and discharge current. Battery life and power data will also be shown. The tester will provide a judgment based on the results: Excellent, Good, Poor, Replacement, or Charging and Retesting.
5.2. Starter Test
After connecting the clips to the battery, select