Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your ESCAM QF518 5MP Pan/Tilt AI Humanoid Detection Auto Tracking Cloud Storage WiFi IP Camera. Please read this manual thoroughly before using the product to ensure proper functionality and safety.
The ESCAM QF518 camera, showcasing its main features including 5MP resolution, H.265X compression, WiFi connectivity, auto tracking, pan/tilt, two-way audio, night vision, Onvif support, TF card slot, and cloud storage.
Package Contents
Verify that all items are present and in good condition upon unpacking. If any items are missing or damaged, please contact customer support.
- WiFi IP Camera x 1
- Power Adapter x 1
- Waterproof Hat x 1
- Screw Bag x 1
- Instruction Manual x 1
Visual representation of the package contents for the ESCAM QF518 camera.
Product Overview
Familiarize yourself with the camera's components and dimensions.
Detailed diagram of the ESCAM QF518 camera, highlighting its dual antennas, power port, RJ45 port, microphone, IR LEDs, white LEDs, lens, IR sensor, speaker, reset button, and Micro SD card slot. Dimensions are also shown: 165mm (length), 150mm (width), 90mm (depth).
Key Components:
- Dual Antennas: For enhanced WiFi signal reception.
- Power Port: Connects to the DC12V2A power adapter.
- RJ45 Port: For wired Ethernet connection (optional).
- Microphone: For audio input and two-way communication.
- IR LEDs (4pcs): For infrared night vision.
- White LEDs (4pcs): For color night vision and alarm illumination.
- 3.6mm Lens: Captures 5MP high-definition video.
- IR Sensor: Detects ambient light for automatic day/night mode switching.
- Speaker: For audio output and DIY alarm voice.
- Reset Button: Used to restore factory settings.
- Micro SD Card Slot: Supports up to 128GB for local storage.
Setup
1. Physical Installation
- Choose a Location: Select a suitable indoor or outdoor location for the camera. Ensure it has a clear view of the area you wish to monitor and is within range of your WiFi network or can be connected via Ethernet. The camera is IP66 waterproof, suitable for outdoor use.
- Mounting:
- Use the provided screw bag to securely mount the camera to a wall or ceiling.
- Attach the waterproof hat to protect the cable connections if installing outdoors.
- Power Connection: Connect the DC12V2A power adapter to the camera's power port and plug it into a power outlet.
2. Network Connection
The ESCAM QF518 supports both WiFi and AP (Access Point) mode connections.
WiFi Connection (Recommended for Remote Surveillance)
- Ensure your camera is powered on and within range of your 2.4GHz WiFi router.
- Open the mobile application (see "App Installation" below) and follow the in-app instructions to add a new device.
- Select the WiFi connection option and enter your WiFi network's SSID and password.
- The camera will connect to your WiFi network, allowing remote access.
Illustration of the camera connecting to a WiFi router for remote surveillance.
AP Connection (Direct Connection without Router)
This mode allows direct connection to your phone for local surveillance without a router.
- Power on the camera.
- On your mobile phone, search for available WiFi networks. You should find a network broadcasted by the camera (e.g., "IPC-XXXXX").
- Connect to this network.
- Open the mobile application and add the device using the AP mode option.
Illustration of the camera's AP mode, enabling direct connection to a smartphone without requiring a router.
3. App Installation
The ESCAM QF518 supports multi-platform access. Download the official mobile application from your device's app store (Android/iOS) or use a compatible PC client/web browser.
- Search for the recommended app name (if available, otherwise a generic IP camera app compatible with Onvif).
- Install the app and create an account if prompted.
- Follow the in-app instructions to add your camera.
The camera supports multiple platforms, allowing access and control from Android/iOS mobile devices, tablets, and Windows PCs.
Operating Instructions
Pan/Tilt Control
The camera offers a wide range of motion for comprehensive coverage:
- Pan: 355° horizontal rotation.
- Tilt: 90° vertical rotation.
You can control the camera's movement remotely via the mobile application by sliding the screen or using directional controls.
The camera's pan (355°) and tilt (90°) capabilities are controlled by sliding the screen in the mobile application for real-time monitoring.
Two-Way Audio & DIY Alarm Voice
The built-in microphone and high-quality speaker enable two-way communication. You can speak through the camera from your phone and hear audio from the camera's location.
The camera also supports a DIY alarm voice feature. You can choose a default alarm sound or record your own voice message. When an alarm is triggered (e.g., by humanoid detection), the camera will play the selected sound to deter intruders.
This image demonstrates the two-way audio functionality, allowing communication between the camera and a mobile phone, and the DIY alarm voice feature to deter unwanted visitors.
Smart Dual Light Modes (Night Vision)
The camera features advanced night vision with three modes:
- Ordinary Mode: IR LEDs turn on at night to provide clear black and white night vision images.
- Color Mode: White LEDs turn on throughout the night to provide full-color night vision images.
- Intelligent Mode: In low light, the camera uses IR LEDs for black and white vision. When an alarm is triggered (e.g., humanoid detection), the white LEDs activate, switching to color night vision and illuminating the area.
Visual explanation of the three Smart Dual Light Modes: Ordinary (IR night vision), Color (White LED for full-color night vision), and Intelligent (switches to color with white LEDs upon alarm trigger).
AI Humanoid Detection & Auto Tracking
The camera is equipped with smart AI functions to detect human shapes and automatically track their movement. This reduces false alarms from pets or other non-human objects.
- When a human is detected, the camera can automatically pan and tilt to follow their movement.
- You can configure the app to receive alarm snapshots, push notifications, and record alarm events.
The camera's Smart AI Humanoid Detection and Auto Tracking feature, showing how it identifies and follows human figures, triggering app notifications and recording motion events.
Storage Options
The ESCAM QF518 offers flexible storage solutions for your recordings:
- Micro SD Card: Supports up to 128GB Micro SD card for local storage. Insert the card into the designated slot (refer to Product Overview diagram).
- Cloud Storage: The camera supports cloud storage services. A free 30-day trial is typically included. Continued use after the trial period may require a subscription.
The camera supports both local storage via a 128GB TF (Micro SD) card and cloud storage, with a free 30-day cloud storage trial available.
H.265X Compression
The camera utilizes H.265X video compression technology, which provides clearer image quality while significantly reducing bit rate, transmission bandwidth, and storage costs compared to older H.264 compression.
A visual comparison demonstrating the storage efficiency of H.265X compression over H.264, resulting in more clear images with less storage consumption.
Onvif and RTSP Protocol Support
The camera supports Onvif and RTSP protocols, allowing integration with third-party NVR (Network Video Recorder) systems and centralized management software.
Illustration of the camera's Onvif protocol support, enabling seamless connection and management with various third-party NVR systems.
Specifications
| Category | Specification |
|---|---|
| Model | ESCAM QF518 |
| Sensor | 1/2.7" 5 Megapixel progressive scan CMOS |
| Minimum Illumination | Color 0.001Lux@F1.2; Night vision 0.0001Lux@F1.2 |
| Focal Length | 3.6mm |
| Viewing Angle | 75.7° |
| Pan/Tilt Range | Pan 355° / Tilt 90° |
| Day/Night Switch | 4PCS IR Leds and 4PCS White Leds, IR distance 20m |
| White Balance | Auto white balance |
| Digital Noise Reduction | Support 3D noise reduction |
| Motion Detection | Support AI humanoid detection and Auto Tracking |
| Privacy Shelter | Support 4 zones |
| OSD | Support OSD setting |
| Video Compression | H.265X |
| Resolution (Mainstream) | 5MP (2592*1944) |
| Resolution (Substream) | (640x360) |
| Video Frame Rate | 25fps (50HZ), 25fps (60HZ) |
| Video Adjustment | Brightness, saturability, chromacity adjustment |
| Audio Input | Built-in microphone |
| Audio Output | Built-in speaker |
| Audio Compression | G.711A |
| Ethernet | RJ-45 (10/100Base-T) |
| Wireless | WiFi 802.11b/g/n, Only support 2.4G; AP Mode |
| IP Type | Dynamic IP & Static IP |
| Network Protocol | HTTP, TCP/IP, UPNP, RTSP, SMTP, NTP, DHCP, DNS, DDNS, FTP |
| Access Protocol | Support ONVIF |
| Max Users | 5 |
| Client Support | iPhone, iPad, Android, Windows PC |
| Micro SD Card | Support max to 128G Micro SD card |
| Cloud Storage | Support (Free 30-day cloud storage) |
| Power Supply | DC12V2A |
| Power Consumption | 2.5W (IR Led Off) / 7.2W (IR Led On) |
| Working Environment | -20°C ~ +50°C, 10% ~ 80% Humidity |
| Waterproof Rating | IP66 |
| Product Size | 165*150*190mm |
| Product Weight | 0.4kg |
| Package Dimension | 193*163*93mm |
| Package Weight | 0.65kg |
Troubleshooting
- Q: Camera cannot connect to WiFi.
- A: Ensure the camera is within range of your 2.4GHz WiFi network. Check that the WiFi password entered in the app is correct. Try restarting both the camera and your router. If issues persist, try AP mode for initial setup or a wired Ethernet connection if available.
- Q: No image or black screen in the app.
- A: Check if the camera is powered on and connected to the network. Verify your internet connection. Ensure the app is updated to the latest version. If the issue is at night, check the night vision settings (Ordinary, Color, Intelligent).
- Q: Motion detection is not working or generating too many false alarms.
- A: Ensure AI Humanoid Detection is enabled in the app settings. Adjust the detection sensitivity. For false alarms, refine the detection zones (privacy shelter zones can also be used to exclude areas). Ensure the camera lens is clean.
- Q: Two-way audio is not clear or not working.
- A: Check your phone's volume and the camera's speaker volume settings in the app. Ensure there is no obstruction to the microphone or speaker on the camera. Reduce background noise in the environment. Ensure a stable network connection for optimal audio quality.
- Q: SD card not recording or not recognized.
- A: Ensure the Micro SD card is inserted correctly. Format the SD card through the camera's settings in the app. Use a high-quality Micro SD card (Class 10 or higher) up to 128GB. If the issue persists, try a different SD card.
- Q: Camera is offline frequently.
- A: Check the stability of your WiFi network. The camera might be too far from the router or experiencing interference. Consider moving the router closer, using a WiFi extender, or connecting via Ethernet if possible.
Maintenance
- Cleaning: Regularly clean the camera lens with a soft, dry cloth to ensure clear image quality. Do not use harsh chemicals.
- Firmware Updates: Check the mobile application periodically for firmware updates. Keeping your camera's firmware up-to-date ensures optimal performance, security, and access to new features.
- Power Supply: Use only the provided power adapter or a compatible replacement with the correct voltage (DC12V2A).
- Environmental Conditions: While the camera is IP66 waterproof, avoid exposing it to extreme temperatures outside its operating range (-20°C to +50°C) or direct, prolonged water submersion.
- Data Backup: If using an SD card, regularly back up important recordings to another storage device or utilize the cloud storage feature.
User Tips
- Optimal Placement: For best auto-tracking performance, place the camera where the primary area of interest is within its pan/tilt range and not too far from the camera.
- Customize Alarm Voice: Utilize the DIY alarm voice feature to record a personalized warning message, which can be more effective than generic alarms.
- Intelligent Night Vision: For a balance of stealth and deterrence, configure the camera to Intelligent Night Vision mode. This keeps IR LEDs on normally and switches to bright white LEDs only when motion is detected.
- Secure Your Network: Always use a strong, unique password for your WiFi network and camera access to prevent unauthorized access.
- Regular Checks: Periodically check the live feed and recorded footage to ensure the camera is functioning as expected and capturing the desired areas.
Compliance & Safety
⚠️ Disclaimer:
Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
This product is designed for security and surveillance purposes. Ensure its use adheres to local privacy laws and regulations.
Warranty & Support
For warranty information and technical support, please refer to the seller's policies or contact ESCAM customer service directly. Keep your purchase receipt as proof of purchase.
Contact Information: Refer to the seller's store page or the official ESCAM website for the most up-to-date support contact details.
