1. Introduction
Thank you for choosing the FDIK Pure Sine Wave Inverter. This device is designed to convert DC power from your battery into AC power, suitable for powering various household appliances, tools, and electronics. With its pure sine wave output, it provides clean and stable power, similar to grid electricity, making it safe for sensitive electronics. This manual provides essential information for the safe and efficient operation of your inverter.

FDIK 5000W Pure Sine Wave Inverter, front view.
2. Safety Information
- Read all instructions before operating the inverter.
- Keep the inverter away from water, moisture, and flammable materials.
- Ensure adequate ventilation around the inverter to prevent overheating.
- Do not open the inverter casing; there are no user-serviceable parts inside.
- Connect the inverter only to batteries with the correct voltage (12V or 24V). Different input voltages are not universal.
- Always connect the battery cables with correct polarity (red to positive, black to negative). Reverse polarity protection is built-in, but incorrect connection can still cause damage.
- Ensure all connections are tight and secure to prevent arcing and overheating.
- Do not exceed the continuous power rating of the inverter.
3. Package Contents
- FDIK Pure Sine Wave Inverter Unit
- Battery Connection Cables
- User Manual
4. Product Overview
The FDIK A10 inverter features a robust design with advanced protection mechanisms and a clear digital display for real-time monitoring.
4.1 Key Features
- Pure Sine Wave Output: Provides stable and clean power, safe for sensitive electronics.
- Smart Digital Display: Shows input voltage, output voltage, frequency, battery level, and power output.
- High Conversion Efficiency: Over 93% conversion rate.
- Powerful Heat Dissipation: Equipped with dual fans for efficient cooling.
- Multiple Protection Features: Overload, Over temperature, Low voltage shutdown, Reverse protection, Output short circuit protection, Over current protection.
- Wide Battery Compatibility: Supports LI, SLD, GEL, FLD, and AGM battery types.
4.2 Components and Display

The smart digital display shows real-time working status including input voltage, output voltage, frequency, battery level, and power output.

Internal view highlighting the inverter's comprehensive protection features.
5. Setup
Proper setup is crucial for the safe and efficient operation of your inverter.
5.1 Choosing the Correct Inverter Model
The inverter is available in 12V and 24V input voltage models. Different input voltages are not universal. Please ensure you have purchased the correct model for your battery system.

Ensure you select the correct 12V or 24V inverter model for your battery.
5.2 Battery Connection
Connect the inverter directly to your battery using the provided cables. Observe correct polarity:
- Connect the red cable to the positive (+) terminal of the inverter and the battery.
- Connect the black cable to the negative (-) terminal of the inverter and the battery.
Ensure all connections are tight and secure. Loose connections can cause overheating and damage.
Video demonstrating the connection of the inverter to a battery and powering an appliance.
5.3 Battery Compatibility and Capacity
The FDIK inverter is compatible with various battery types, including LI (Lithium), SLD (Sealed Lead-Acid), GEL, FLD (Flooded), and AGM (Absorbent Glass Mat).

The inverter supports various battery types for flexible use.
To determine the minimum battery capacity required for a 2200W inverter to run at full load, use the following formula:
Battery capacity = 2200W / U (battery voltage) / 0.72
For example:
- For a 12V battery, you typically need a 254AH battery to run a 2200W inverter at full load.
- For a 24V battery, you typically need a 127AH battery to run a 2200W inverter at full load.
If your battery output power does not reach 2200W, then the maximum output power of the inverter you purchased will be affected by the maximum output power of the battery.

Table illustrating battery capacity and corresponding maximum output power for 12V and 24V systems.
| Battery Capacity (12V) | Max Output Power (12V) | Battery Capacity (24V) | Max Output Power (24V) |
|---|---|---|---|
| 70AH | 604W | 70AH | 1209.6W |
| 100AH | 864W | 100AH | 1728W |
| 150AH | 1296W | 150AH | 2592W |
6. Operating Instructions
6.1 Powering On/Off
- After connecting the inverter to the battery, press the ON/OFF switch on the inverter to turn it on.
- The digital display will illuminate, showing the current input voltage, output voltage, frequency, and battery level.
- To turn off the inverter, press the ON/OFF switch again.
6.2 Connecting Appliances
- Ensure the inverter is powered on.
- Plug your AC appliance into the AC OUT socket on the inverter.
- Monitor the digital display to ensure the appliance is drawing power within the inverter's continuous rating (2200W).
6.3 Monitoring the Display
The multi-function LCD provides real-time feedback:
- DC Voltage: Shows the input voltage from your battery.
- AC Voltage: Displays the output AC voltage (e.g., 220V).
- Power Output (W): Indicates the current power being drawn by connected appliances.
- Frequency (Hz): Shows the output frequency (e.g., 50Hz).
- Battery Level: A graphical indicator of your battery's charge status.
7. User Tips
- Understand Power Ratings: The inverter has a continuous power rating of 2200W and a peak power rating of 5000W. Ensure your appliances' continuous power draw does not exceed 2200W to prevent overloading and potential damage. Peak power is for short surges, like motor startup.
- Match Battery Capacity: Always use a battery with sufficient capacity to support your desired load. Refer to the battery capacity calculation in Section 5.3. An undersized battery can lead to frequent low voltage shutdowns or reduced performance.
- Check Connections Regularly: Periodically inspect battery and appliance connections for tightness and corrosion. Loose connections can cause power loss and heat buildup.
- Monitor for Overheating: While the inverter has powerful heat dissipation, ensure it's placed in a well-ventilated area, especially when running high-power appliances.
8. Maintenance
- Cleaning: Keep the inverter clean and free from dust and debris. Use a dry cloth to wipe the exterior. Do not use liquids or abrasive cleaners.
- Ventilation: Ensure the cooling fans and vents are not obstructed. Clear any blockages to maintain proper airflow.
- Cable Inspection: Periodically check the battery cables for any signs of wear, fraying, or damage. Replace damaged cables immediately.
- Storage: If storing the inverter for an extended period, disconnect it from the battery and store it in a cool, dry place.
9. Troubleshooting
- No Power Output:
- Check if the inverter is turned on.
- Verify battery connections are secure and correct polarity.
- Check battery voltage; if too low, the inverter may shut down (low voltage shutdown protection).
- Ensure the appliance is plugged in correctly and functioning.
- Inverter Shuts Down:
- Overload Protection: The total power draw of connected appliances exceeds the inverter's continuous rating (2200W). Reduce the load.
- Over Temperature Protection: The inverter is overheating. Ensure proper ventilation and reduce load.
- Low Voltage Shutdown: Battery voltage is too low. Recharge or replace the battery.
- Short Circuit Protection: A short circuit in the output or connected appliance. Disconnect appliances and check for faults.
- Fuses Blowing:
- This typically indicates an overload or a short circuit. Ensure the total load is within the inverter's capacity.
- If fuses continue to blow, there may be an internal fault or a persistent overload issue.
- Inverter Burned Out Shortly After Use:
- This can be caused by severe overloading, incorrect input voltage (e.g., 24V inverter connected to 12V battery or vice-versa), or a manufacturing defect. Review your setup and load carefully.
10. Specifications
| Feature | Specification |
|---|---|
| Brand Name | FDIK |
| Model Number | FDIK-A10 |
| Type | DC/AC Inverter (Pure Sine Wave) |
| Input Voltage | 12V or 24V (model dependent) |
| Output Voltage | 220-240V |
| Continuous Power | 2200W |
| Peak Power | 5000W |
| Output Frequency | 50Hz |
| Output Type | SINGLE |
| Conversion Efficiency | 93%+ |
| Size | 300*170*85MM |
| Certification | CE, RoHS |
| Origin | Mainland China |

Inverter dimensions and power ratings.
11. Warranty and Support
The FDIK Pure Sine Wave Inverter comes with a one-year warranty. Please note that vulnerable parts may not be included under warranty. For any technical assistance or support, please contact customer service.

Certification, warranty details, and customer support contact.
Customer Service Online: +86 15935111083 (WhatsApp)