4DRC 4D-V2

Contents

4DRC V2 Mini Drone Operating Instructions

Model: 4D-V2 | Brand: 4DRC

Suitable for ages over 14

1. Introduction

This manual provides comprehensive instructions for the safe and effective operation of your 4DRC V2 Mini Drone. Please read all instructions carefully before use and retain this manual for future reference.

Product Overview

The 4DRC V2 Mini Drone is a foldable quadcopter equipped with an HD camera, offering features like air pressure altitude hold, WiFi FPV (First Person View), and various flight modes. Its compact design makes it easy to carry and operate.

4DRC V2 Mini Drone with remote control and smartphone showing FPV feed

Figure 1: 4DRC V2 Mini Drone with remote control and smartphone

2. Safety Warnings

Failure to follow these safety instructions may result in injury, damage to the product, or other property damage.

  • The packaging and instructions contain important information and should be kept.
  • You are responsible for ensuring that no harm will be caused to the personal and property of others when operating this aircraft.
  • Commissioning and installing of aircraft must be strictly in accordance with the operating instructions. Maintain a distance of 2 to 3 meters between the aircraft and users or other people to prevent bumping into heads, faces, and bodies.
  • Our company and distributors are not responsible for any loss, damage, or injury caused by improper use or operation.
  • Children under 14 years old are prohibited from operating this product without adult supervision.
  • Follow all instructions for correct installation and use. Some parts may require adult assembly.
  • This product contains small parts; keep it out of reach of children to prevent accidental eating or suffocation.
  • Do not operate on roads or in areas with accumulated water to avoid accidents.
  • Dispose of packing materials properly to avoid harm to children.
  • Do not disassemble or modify the aircraft, as this may cause malfunction.
  • The charging cable must be inserted into a designated power supply (5V = 2A) that matches the product label.
  • Only use the charging cable configured by the factory. The charging cable is not a toy.
  • When charging the rechargeable battery, it must be under adult supervision and far away from flammable materials. Do not leave the monitoring range during charging.
  • Do not short-circuit or squeeze the battery to avoid explosion.
  • Do not mix different types of lithium batteries.
  • The aircraft uses a rechargeable lithium battery, which needs to be removed for charging.
  • Do not short-circuit, decompose, or throw the battery into fire. Do not place the battery in high temperatures or near electric heating devices.
  • The aircraft should be used as far away from other electrical equipment and magnetic objects as possible to avoid mutual interference.
  • Keep a safe distance from the high-speed rotating propeller to avoid scalp or cuts.
  • The motor is a hot part; do not touch it to avoid burns.
  • LEDs emit laser radiation; do not direct light beams at others.
  • Do not use the model near your ears; misuse may cause hearing damage.
  • Use only the provided USB charging cable to charge the battery to prevent damage.
  • To meet aeronautical radio station requirements, stop using the model remote control in city areas as required by relevant state departments.
  • Turn off the switch and unplug the battery when the aircraft battery is used up. Allow 30 minutes of rest before charging to prevent battery damage.
  • The remote control distance is affected if the power of the remote control or the aircraft is insufficient.
  • If the aircraft does not have sufficient power, it will not be able to fly high enough or will have difficulty taking off.
  • If the aircraft is broken or deformed, repair it in time. Do not fly if damage is severe, as it may lead to injury.
  • If not used for a long time, remove the remote control battery to avoid damage from battery leakage.
  • Never allow the aircraft to crash from high altitude or have a serious collision, as this will damage the aircraft or shorten its life.
  • Replace damaged accessories only with genuine parts from the Company to ensure flight effect and safety performance.

3. Setup

3.1 Package Contents

The complete set includes:

  • Aircraft × 1
  • Remote control × 1
  • Battery × 1 (or more depending on SKU)
  • Fan blade × 4
  • USB charging cable × 1
  • Operating Instructions × 1
  • Mobile phone holder × 1 (optional, not included in standard version)
  • Screwdriver × 1
  • Frame × 4
Package contents including drone, remote, batteries, and accessories

Figure 2: Typical package contents

3.2 Remote Control Battery Installation

Remove the battery cover on the back of the remote control. Insert 3 AAA batteries (not included) according to the polarity instructions marked inside the compartment. Ensure correct positive and negative pole alignment. Do not mix old and new batteries or different types of batteries.

Remote control with battery compartment visible

Figure 3: Remote control with battery compartment

3.3 Aircraft Battery Installation

Install the modular battery into the battery compartment of the aircraft. If your SKU includes a second battery, it is typically stored in a dedicated slot on the remote control itself.

Hand inserting battery into remote control, showing location of second battery storage

Figure 4: Location of second battery storage (if applicable)

3.4 Charging Instructions

Insert the USB plug into a computer or a power supply (5V = 2A max). Then, insert the other end into the module battery. The red indicator light on the charging cable will not light up during charging, and will light up when charging is complete. Charging time is approximately 60 minutes.

Important:

  • Only use the provided charging cable.
  • Do not use non-standard chargers.
  • If the charging plug overheats, stop charging immediately.
  • Do not leave the battery unattended while charging.
  • Allow the battery to cool for about 30 minutes after flight before charging.
USB charging cable connected to drone battery

Figure 5: Charging the drone battery

3.5 APP Download and Installation

Scan the QR code below with your mobile phone to download the "4DRC FPV" application. Select the corresponding system (Android/iOS) to download in your browser.

QR code for 4DRC FPV app download

Figure 6: Scan to download the 4DRC FPV App

3.6 Mobile Phone Holder Mounting

To mount the mobile phone holder:

  1. Pull out the plastic rubber part at the remote control slot.
  2. Align the mobile phone holder with the remote control slot position.
  3. Elevate the assembled mobile phone holder, and then align your mobile phone with the holder and place it in position.
Diagram showing how to attach phone holder to remote control

Figure 7: Mobile phone holder assembly

4. Operating Instructions

4.1 Remote Control Overview

The remote control features various buttons and joysticks for precise flight control. Familiarize yourself with its layout:

Diagram of remote control with labeled buttons and joysticks

Figure 8: Remote Control Layout

Key Functions:

  • 1. Emergency Stop / One-Key Calibration: Short press for emergency stop, long press for one-key calibration.
  • 2. One-Key Take-off / One-Key Landing: Short press for take-off, long press for landing.
  • 3. One-Key Return / Headless Mode: Long press for return, short press for headless mode.
  • 4. One-Key Rotation / One-Key Circling: Activates rotation or circling.
  • 5. Third Gear Acceleration: Adjusts flight speed.
  • 6. Throttle / Left and Right Control Lever: Controls altitude and yaw.
  • 7. Reverse Fine-tuning: Adjusts backward drift.
  • 8. Advance Fine-tuning: Adjusts forward drift.
  • 9. Right Fine-tuning: Adjusts rightward drift.
  • 10. Left Fine-tuning: Adjusts leftward drift.
  • 11. Switch: Power on/off.
  • 12. Roll: Activates 3D flip.
  • 13. Advance/Reverse/Left/Right Control Lever: Controls pitch and roll.

4.2 Initial Flight Preparation

  1. Attach the protective propeller covers to the aircraft.
  2. Unfold the quadcopter and place it on a horizontal surface.
  3. Switch on the power switch on the quadcopter. The indicator lights will blink, indicating standby mode.
  4. Switch on the remote control power switch (Key 11).
  5. Push the left control lever (throttle) to the highest point, then reset it to the lowest point. When the quadcopter's lights stop blinking, frequency matching is successful.
  6. Press and hold Key 1 to calibrate. The quadcopter's indicator lights will stop blinking and stay on, indicating successful calibration.

4.3 Basic Flight Controls (Remote Control)

Ascend/Descend:

  • Push the left joystick (throttle) up to increase propeller speed and ascend.
  • Push the left joystick (throttle) down to decrease propeller speed and descend.

Turn Left/Right (Yaw):

  • Push the left joystick (steering rudder) to the left to turn the aircraft nose left.
  • Push the left joystick (steering rudder) to the right to turn the aircraft nose right.

Forward/Backward (Pitch):

  • Push the right joystick (rudder) up to move the aircraft forward.
  • Push the right joystick (rudder) down to move the aircraft backward.

Left/Right Sideways Flight (Roll):

  • Push the right joystick (rudder) to the right to move the aircraft fuselage right.
  • Push the right joystick (rudder) to the left to move the aircraft fuselage left.

4.4 Trim Adjustments

If the aircraft drifts without input, use the fine-tuning buttons (Keys 7, 8, 9, 10) to correct its flight path until it hovers stably.

4.5 One-Key Take-off and Landing

  • One-Key Take-off: Press the one-key take-off button (Key 2) once. The propellers will slowly rotate, and the aircraft will rise from the ground.
  • One-Key Landing: During flight, long press the one-key landing button (Key 2). The aircraft will land slowly. You can use the direction change or left control lever to guide it to a specific position before it stops rotating.

4.6 Altitude Hold

The drone features air pressure automatic hovering. When you release the left joystick (throttle), the quadcopter will maintain its current altitude.

Drone hovering with altitude hold feature indicated

Figure 9: Altitude Hold Function

4.7 Headless Mode

In headless mode, the aircraft's orientation is relative to the remote control, simplifying flight control regardless of the drone's actual front. Short press Key 3 to enter/exit headless mode. The navigation light will blink when in headless mode.

Drone flying in headless mode with directional indicators

Figure 10: Headless Mode

4.8 One-Key Return

If the aircraft has traveled too far, long press Key 3 on the remote control. The remote control will beep, and the aircraft will automatically fly back to its original take-off position. Any joystick manipulation will cancel the return function.

4.9 3D Flipping Flight

Once proficient with basic controls, you can perform 3D flips. Ensure the aircraft is at least 3 meters above the ground. Press the roll key (Key 12) on the remote control, then push the direction handle (right joystick) in the desired direction (forward, backward, left, or right) to perform a flip.

Drone performing a 3D flip

Figure 11: 3D Flip Maneuver

4.10 APP Application Control

After downloading and installing the "4DRC FPV" app:

  1. Turn on the aircraft, then go to your mobile phone's Wi-Fi settings and connect to the "4DRC********" network.
  2. Open the "4DRC FPV" app.
  3. Horizontal Calibration: Click the "correction" icon in the app. The LED light on the aircraft will flash, indicating calibration is complete. Ensure the aircraft is on a horizontal plane.
  4. One-Key Take-off/Landing: Use the dedicated icons in the app for one-key take-off and landing.
  5. Flight Controls: The app provides virtual joysticks for controlling ascent/descent, yaw, pitch, and roll, similar to the physical remote control.
  6. Speed Switching: Click the "30%" icon in the app to switch between flight speeds.
  7. Fine-tuning: Use the fine-tuning controls in the app to correct any drifting.

4.11 Advanced APP Features

The 4DRC FPV app offers additional features:

  • Gesture Recognition: When facing the camera's front lens, click the gesture photo button in the app. Pose specific gestures (e.g., palm for photo, fist for video) to trigger photo or video capture. Ensure good lighting and a distance of 2-3 meters from the lens.
  • MV Interface: Access the MV interface to apply filter effects and record short videos directly through the app. Recorded media is saved to your media library.
  • Gravity Sensor Control: Control flight by tilting your phone.
  • Voice Control: Open the app's voice control system and speak commands to the aircraft.
  • Track Flight: Draw a trajectory on your phone screen, and the drone will follow it.
Smartphone displaying real-time FPV feed from drone

Figure 12: Real-time HD video transmission via WiFi

Smartphone screen showing track flight path for drone

Figure 13: Track Flight Feature

Video 1: 4DRC V2 Mini Drone Product Demonstration

5. Maintenance

  • Propeller Replacement: The blades are marked with 'A' or 'B'. When replacing, ensure the new blade matches the corresponding letter on the drone. Incorrect installation will prevent flight.
  • Cleaning: Regularly clean the drone body and propellers to remove dust and debris. Use a soft, dry cloth.
  • Storage: When not in use for extended periods, remove batteries from both the drone and remote control. Store in a cool, dry place.

6. Troubleshooting

QuestionReasonApproach
Remote control has no power supply1. The power switch is not on
2. The battery is not inserted correctly
3. The battery runs out
1. Press the power switch
2. Check battery insertion and polarity
3. Replace with new batteries
Remote control is not available1. The remote control is not switched on
2. Too fierce wind
3. Light blinks, the aircraft does not rotate
1. Turn on the remote control switch
2. Avoid flying in windy conditions
3. Re-match frequency: turn off/on aircraft and remote, place on stable ground
The aircraft cannot be raised1. Rotor rotation speed is too slow
2. Incomplete charging of the aircraft
1. Push the power joystick up
2. Fully charge the aircraft
The aircraft landed quickly1. Pull the power control lever back too quickly1. Slowly pull back the power joystick to land the aircraft
Out of control1. The throttle stick is not pulled to the lowest position
2. Exceeds the effective control distance
3. Uncontrolled, flying aimlessly
1. Pull throttle lever to lowest position
2. Ensure within 100M effective distance
3. Avoid harsh conditions (wind > force 4, temp < 20°C)
Take-off or other incorrect maneuvers1. Start-up position is not at level ground, the current plane is calculated during gyroscope calibration1. Place the aircraft on a flat surface for calibration

7. Specifications

FeatureSpecification
Model Number4D-V2
Drone Weight19.5g
Takeoff Weight29g
Dimensions (Folded)5 x 5 x 3 CM
Dimensions (Open)9.5 x 9.5 x 3 CM
Fuselage Length88mm
Width99mm
Height30mm
Blade Length42mm
Video Capture Resolution1080p FHD, 4K UHD
Flight Time5~10 minutes (approx. 10-12 minutes per single battery)
Remote Distance50-80 meters
Flight Height<120m
Maximum Flight Speed≤19m/s
Anti-wind Ability<10km/h
Control Channels4 channels
Controller ModeMODE2 (Left-hand throttle)
Motor TypeBrush Motor
Power SourceElectric (Lithium battery)
Body Battery3.7V 700MAH
Charging Time90 minutes (approx. 60 minutes for module battery)
Remote Control Battery2 * AAA (Not included)
MaterialPlastic
State of AssemblyReady-to-Go
Indoor/Outdoor UseIndoor-Outdoor
Operator Skill LevelBeginner, Intermediate, Expert
Table of drone specifications including size, battery, and range

Figure 14: Detailed Specifications

8. User Tips

  • Controller Batteries: Remember to purchase 3 AAA batteries for the remote control, as they are not included in the package.
  • Stable Flight: Many users find this drone to be very stable and easy to control, even for beginners. Practice in an open, calm environment.
  • Indoor Use: The drone's small size makes it suitable for indoor flight, allowing for practice and enjoyment even in limited spaces.
  • Spare Parts: If you need additional batteries or other spare parts, contact the seller directly for availability and pricing.
  • APP Compatibility: The "4DRC FPV" app is compatible with both iOS and Android devices, enabling smartphone control and FPV features.

9. Warranty and Support

This product does not come with a specified warranty. For any technical support, troubleshooting assistance, or inquiries regarding spare parts, please contact the seller directly through the platform where you purchased the drone.

A user manual in PDF format is available for download: View User Manual (PDF)

© 2024 4DRC. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.