1. Product Overview
The Miwayer MB-10 is a versatile wireless XLR microphone converter system designed to transform your wired dynamic or condenser microphones into wireless units. It consists of a transmitter, a receiver, and a 6.35mm adapter, offering high-fidelity audio transmission for professional recording, dubbing, webcast, and music performances.
2. Packing List
Please check the package contents upon receipt:
- 1 x MB-10 Transmitter
- 1 x MB-10 Receiver
- 1 x 6.35mm Converter (for Receiver output)
- 1 x Type-C Charging Cable
- 1 x User Manual (English)
3. Setup Guide
3.1 Charging the Devices
Both the Transmitter and Receiver are equipped with built-in 800mAh lithium batteries. Before first use, ensure both units are fully charged.
- Connect the included Type-C charging cable to the charging port on both the Transmitter and Receiver.
- Connect the other end of the cable to a standard USB power adapter (not included).
- The battery indicator on the display screen will show charging status. A full charge provides over 5 hours of continuous use.
3.2 Connecting the Transmitter to a Microphone
The MB-10 Transmitter features a 3-pin XLR interface.
- Identify the 3-pin XLR output on your dynamic or condenser microphone.
- Carefully plug the Miwayer MB-10 Transmitter directly into the XLR output of your microphone. Ensure a secure connection.
3.3 Connecting the Receiver to Audio Equipment
The MB-10 Receiver outputs audio via a standard XLR connection. Use the included 6.35mm converter if your audio equipment requires it.
- Plug the MB-10 Receiver into the XLR input of your mixer, amplifier, sound card, or other audio equipment.
- If your equipment has a 6.35mm input, attach the provided 6.35mm converter to the Receiver's XLR output, then plug it into your equipment.
3.4 Initial Power On and Frequency Matching
The system features automatic frequency matching for ease of use.
- Ensure both the Transmitter and Receiver are fully charged and connected as described above.
- Press and hold the POWER button on both the Transmitter and Receiver to turn them on.
- After powering on, the transmitter will automatically connect with the idle receiver, selecting one of 16 adjustable frequency points. This allows multiple sets of devices to be used simultaneously without interference.
4. Operating Instructions
4.1 Transmitter Controls and Display
- POWER Button: Press and hold to turn on/off. Short press to display the current adjustment mode.
- CH+ / VOL- Buttons: Used for frequency adjustment and channel selection.
- Display Screen: Shows battery indicator, transmit signal, current frequency, and channel (CHA, CHB, CHz).
4.2 Receiver Controls and Display
- POWER Button: Press and hold to turn on/off.
- Indicators: RF (Radio Frequency) and AF (Audio Frequency) indicators show signal status. Battery indicator shows remaining power.
4.3 Microphone Voltage Adjustment Modes
The MB-10 Transmitter supports three voltage modes to accommodate different microphone types:
- 0V Mode: For dynamic microphones.
- 5V Mode: For conventional condenser microphones or audio recording microphones.
- 48V Mode: For phantom-powered condenser microphones.
To switch modes: Long press the POWER button on the Transmitter for 3 seconds. Short press the POWER button to display the current adjustment mode. The system has a memory function and will display the last used mode upon restart.
Important Note: 48V mode only supports conventional 48V condenser microphones. It does NOT support 48V condenser microphones powered by high-power external phantom power supplies. Refer to Figure 9 for clarification.
4.4 Wireless Transmission
The MB-10 provides stable wireless transmission with a pickup distance of 30 to 50 meters, featuring anti-interference and anti-whistle capabilities for clear sound.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the devices. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the MB-10 in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the units frequently. Recharge them regularly, even if not in use for extended periods (e.g., once every 3 months).
- Handling: Handle the units with care. Avoid dropping or subjecting them to strong impacts.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or weak signal |
|
|
| Unit does not power on |
|
|
| 48V condenser microphone not working |
|
|
7. Specifications
| Feature | Detail |
|---|---|
| Material | ABS |
| Frequency Range | 571~598MHz |
| Channels | 16 frequency points |
| Channel Spacing | 0.5~2.5MHz |
| Adjustment | DQPSK |
| Frequency Stability | ±3PPM |
| Frequency Response | 40Hz~20kHz |
| Wireless Range | 30~50M |
| Lithium Battery | 3.7V, 800mAh (each unit) |
| Transmitter Size | 106 x 36 x 25mm (4.17 x 1.42 x 0.98in) |
| Receiver Size | 93 x 36 x 24mm (3.66 x 1.42 x 0.94in) |
| Item Weight | 140g (4.93oz) |
| Package Weight | 280g (9.90oz) |
| Package Size | 14.6 x 14.1 x 5.2cm (5.75 x 5.55 x 2.05in) |
8. User Tips
- Battery Conservation: Always ensure the unit is powered off when not in use to conserve battery life. The clear LED display helps you monitor the on/off condition.
- Interference Management: While the MB-10 features a unique identification code for stable connection, if using multiple wireless systems from different brands, ensure they operate on different frequencies to avoid potential interference.
- Microphone Compatibility: Double-check the voltage requirements of your condenser microphone. The MB-10's 48V mode is for conventional 48V condenser microphones and is not designed for those requiring high-power external phantom power.
- Optimal Placement: For best wireless performance, try to maintain a clear line of sight between the transmitter and receiver, and avoid placing them near large metal objects or other strong RF sources.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.