1. Product Overview
The ToolkitRC U3 and UN3 are compact and powerful USB-C battery chargers designed for RC models, FPV drones, and model cars. The U3 model is specifically for 2-3S LiPo batteries with a balance port direct charge, while the UN3 model is for 4-8S NiMh batteries and comes with a Tamiya charging head. Both chargers feature a universal USB-C input port, supporting PD, QC, AFC, and SCP protocols for convenient charging.

Image 1.1: ToolkitRC U3 and UN3 USB-C Battery Chargers
2. What's in the Box
For U3 LiPo Charger:
- 1 x U3 USB-C LiPo Charger
- 1 x USB-C Input Cable
- 1 x Quick Start Guide

Image 2.1: ToolkitRC U3 package contents
For UN3 NiMh Charger:
- 1 x UN3 USB-C NiMh Charger
- 1 x USB-C Input Cable
- 1 x Quick Start Guide

Image 2.2: ToolkitRC UN3 package contents
3. Specifications
ToolkitRC U3 LiPo Charger
| Feature | Specification |
|---|---|
| Input Voltage | TYPEC 9.0-20.0V @MAX 25W |
| TypeC Protocol | PD QC AFC SCP |
| Output Power | 2.0A@20W |
| Battery Type | LiPo 2~3S |
| Balance Current | 200mA @ 4.20V |
| Charging Accuracy | <0.02V @4.20V |
| Product Size | 85.0 x 48.0 x 21.0 mm |
| Product Weight | 47g |
| LED Indicator | Green: Standby/Full, Red: Charging |

Image 3.1: ToolkitRC U3 Dimensions
ToolkitRC UN3 NiMh Charger
| Feature | Specification |
|---|---|
| Input Voltage | TYPEC 9.0-20.0V @MAX 25W |
| TypeC Protocol | PD QC AFC SCP |
| Output Power | 2.0A@20W |
| Battery Type | NiMh 4~8S |
| Output Cable Length | 68mm |
| Operating Temperature | 0℃ - 40℃ |
| Product Size | 85.0 x 48.0 x 21.0 mm |
| Product Weight | 50g |
| LED Indicator | Green: Standby/Full, Red: Charging |

Image 3.2: ToolkitRC UN3 Dimensions and Cable Length
4. Setup Instructions
4.1 Power Connection
- Connect the provided USB-C input cable to the USB-C port on the charger.
- Connect the other end of the USB-C cable to a compatible power adapter (e.g., a wall charger) that supports PD, QC, AFC, or SCP protocols for optimal performance.

Image 4.1: Connecting the U3 Charger to a USB-C Power Adapter
4.2 Battery Connection
For U3 LiPo Charger:
- Ensure your LiPo battery is 2-3S.
- Connect the balance port of your LiPo battery directly to the balance port on the U3 charger.

Image 4.2: Direct Balance Port Connection for U3 LiPo Charger
For UN3 NiMh Charger:
- Ensure your NiMh battery is 4-8S.
- Connect the Tamiya connector of your NiMh battery to the Tamiya charging head on the UN3 charger's output cable.

Image 4.3: Tamiya Charging Head for UN3 NiMh Charger
5. Operating Instructions
- Power On: Once the charger is connected to a power source via USB-C, the LED indicator will light up, typically green, indicating standby mode.
- Initiate Charging: After connecting a compatible battery (LiPo for U3, NiMh for UN3) as described in the Setup section, the LED indicator will turn RED, signifying that charging is in progress.
- Charging Complete: When the battery is fully charged, the LED indicator will turn GREEN.
Video 5.1: Demonstration of ToolkitRC U3 and UN3 charger operation, including power connection and battery charging indication.
6. Maintenance
- Keep the charger clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Store the charger in a dry environment, away from direct sunlight and extreme temperatures.
- Avoid exposing the charger to moisture or liquids.
- Regularly inspect cables and connectors for any signs of wear or damage.
7. Troubleshooting
7.1 Charger Not Powering On
- Check USB-C Connection: Ensure the USB-C cable is securely connected to both the charger and the power adapter.
- Verify Power Adapter: Confirm that your power adapter is functioning correctly and provides sufficient power (9.0-20.0V, MAX 25W) and supports PD, QC, AFC, or SCP protocols.
7.2 Battery Not Charging
- Correct Battery Type: Ensure you are using the correct charger for your battery type (U3 for LiPo 2-3S, UN3 for NiMh 4-8S).
- Proper Battery Connection: Double-check that the battery is correctly and securely connected to the charger (balance port for U3, Tamiya connector for UN3).
- LED Indicator: If the LED remains green after connecting the battery, there might be an issue with the battery or its connection.
8. User Tips
- The LED indicator on the charger will flash green when the battery is nearing a full charge, providing an early visual cue for completion.
- For optimal charging speed and efficiency, use a USB-C power adapter that explicitly supports PD, QC, AFC, or SCP fast charging protocols.
- These chargers are designed to be highly portable. The U3 weighs only 47g and the UN3 weighs 50g, making them easy to carry for on-the-go charging.

Image 8.1: U3 Charger Weight (47g)

Image 8.2: UN3 Charger Weight (50g)
9. Warranty and Support
For warranty information, technical support, or any product-related inquiries, please contact the seller or refer to the official ToolkitRC website. Keep your purchase receipt as proof of purchase.