1. Product Introduction
This product features a high-power LED lamp bead chip, offering high brightness, low energy consumption, and long life. It is designed for a variety of lighting scenarios.
2. Warning and Safety Information
- Adult Supervision: Must be used under direct adult supervision.
- No Self-Disassembly: Unauthorized personnel are not allowed to attempt self-repair.
- Environmental Conditions: Do not use this product in humid or high-temperature environments.
- Eye Protection: Avoid direct eye exposure to the LED beam.
- Power Disconnection: Be sure to cut off the power supply before installation to prevent electric shock.
3. Installation and Usage Instructions
- Preparation: First, ensure that the power supply voltage meets the product specifications.
- Installation Work: Make sure the connected power supply is disconnected before proceeding.
- Fixed Position: Install the LED lamp beads firmly in the appropriate position.
- Use with Power: The LED board can be used normally when connected to the power supply.
4. Precautions for Use (Operating)
- Avoid use in humid or high-vibration environments.
- Do not operate in high-temperature environments for extended periods.
- Avoid frequent switching to extend the service life of the product.
- Unauthorized disassembly is prohibited, and the product must not be disassembled.
5. Product Features
- High light intensity and wide irradiation range.
- Energy saving, environmental protection, and long life.
- Easy to install and compatible with a variety of lighting fixtures.
6. Specifications
| Attribute | Value |
|---|---|
| Brand Name | ICYYGO |
| Model Number | IC-12V 24V |
| Shape | Round |
| Certification | CCC |
| Origin | Mainland China |
| Voltage | DC12V, DC24V |
| Light Color Options | White light, warm light, neutral light, red light, green light, pink-violet light, blue light, golden light, ice blue light |
| SMD Type | 2835 |
| Power Options | 3W, 5W, 7W, 9W, 12W |
| Dimensions (Diameter) | 3W: 31MM, 5W: 44MM, 7W: 49MM, 9W: 60MM, 12W: 85MM |
Note: The voltage attribute in the product properties refers to the power rating (e.g., 3W-31MM) and not directly to electrical voltage. The actual operating voltages are DC12V and DC24V.
7. Troubleshooting (FAQs)
| Fault Phenomenon | Possible Causes | Solutions |
|---|---|---|
| Light does not light up/flashes | The power is not connected or the contact is poor. | Check the power supply and connecting cable. |
| Overheating | Poor heat dissipation. | Improve the ventilation conditions of the installation location. |
| Uneven illumination | Improper angle of lamp beads. | Adjust the angle or replace accessories. |
8. User Tips
- When replacing existing lights, ensure the new LED board's diameter (e.g., 31mm, 44mm, 49mm, 60mm, 85mm) fits the fixture.
- Verify the voltage (12V or 24V) and wattage (3W, 5W, 7W, 9W, 12W) match your power supply requirements.
- Consider the light color (e.g., White, Warm, Neutral, Red, Green, Blue, Golden, Ice Blue, Pink-Violet) for your specific application.
- For optimal performance and longevity, ensure adequate ventilation to prevent overheating.
9. Warranty and Support
- Warranty Period: Within one year, defects caused by non-human factors can be replaced or refunded.
- Customer Support: Please contact through the ICYYGO brand customer service for assistance.
10. Product Overview Video
11. Additional Resources
A detailed user manual in PDF format is available for download. This document provides comprehensive information on the product's features, installation, and troubleshooting.
You can access the PDF manual here: ICYYGO LED Light Panel User Manual (PDF)