Kunray KR5V V2

Contents

Kunray KR5V V2 72V 5000W Electric Brushless Motor Kits User Manual

Model: KR5V V2 | Brand: Kunray

1. Introduction

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Kunray KR5V V2 72V 5000W Electric Brushless Motor Kit. Please read these instructions carefully before use and retain them for future reference.

Video: Overview of the Kunray KR5V BLDC Motor, showing its features, wiring connections, and a demonstration of its operation with a throttle.

2. Safety & Warnings

  • Ensure the controller used is a brushless, Hall sensor version.
  • Verify that your controller has a self-learning function for proper device matching.
  • Do not touch the motor or controller when in operation, as temperatures can become high and cause burns.
  • This device is designed for off-road use. Ensure compliance with all local regulations regarding electric vehicle modifications and usage.
  • ⚠️️ Please mind potential fire risk and strictly follow the instruction manual for charging and storage.

3. Product Components

The Kunray KR5V V2 kit typically includes the following components:

  • KR5V V2 BLDC Motor
  • Bluetooth Controller (Fardriver)
  • Chain and Sprocket (options: #35-9T, #35-11T, 420-10T)
  • Throttle (Pedal Set OR LED Throttle Set - one option included)

Note: Battery and additional wiring for battery connection are not included.

Diagram showing the packing list for the Kunray KR5V V2 kit, including the motor, chain and tooth, Bluetooth controller, and a choice between pedal or LED throttle.
Figure 3.1: Typical Packing List for the KR5V V2 Kit

4. Specifications

4.1 Motor Specifications (KR5V V2 BLDC Motor)

ParameterValue
Brand NameKUNRAY
Rated Voltage72VDC
Rated Power5000W
Rated RPM5000rpm
Peak RPM8000rpm
Rated Current60A
Peak Current80-100A
Torque N.m8.5N.m
Peak w.m35N.m
Poles5pair / 10pcs
SensorHall sensor
TMP SensorKTY84-130
ClassF(155℃)
IP RatingIP54
CoolingAir cooling
Phase Wire8mm
Weight5.5KG
Sprocket Options#35 9T / #35 11T / 420-10T
Image showing detailed motor specifications and features like peak power, poles, sensor type, and cooling method.
Figure 4.1: Motor Specifications Overview
Technical drawing of the Kunray KR5V motor with dimensions and a table of main parameters.
Figure 4.2: Motor Dimensions and Main Parameters

4.2 Controller Specifications (Fardriver)

ParameterValue
Rated Power3000-5000W
Rated Voltage48-72V
Current100A
Protect Phase Current300A
Net Weight1.9KG
Waterproof GradeIP67
Image showing the Fardriver controller with its parameters like current, rated voltage, net weight, and IP class.
Figure 4.3: Fardriver Controller Parameters

4.3 Sprocket Options

The kit offers three sprocket options:

  • #35-9T
  • #35-11T
  • 420-10T
Image displaying the three available sprocket options: #35-9T, #35-11T, and 420-10T.
Figure 4.4: Available Sprocket Options
Diagram illustrating two chain types: #35 108link and 420 chain.
Figure 4.5: Chain Types

5. Setup and Installation

5.1 Motor and Controller Connection

Connect the motor's phase wires and Hall wires to your controller. Ensure all connections are secure and correctly matched according to the wiring functions below. The controller features built-in Bluetooth for configuration.

Image of the Fardriver controller highlighting its Bluetooth support and app compatibility.
Figure 5.1: Fardriver Controller with Bluetooth Support

Hall Wire Connections:

Hall Wire ColorFunction
Red5V
BlackGND
WhiteTemp sensor
GreenHall-V
BlueHall-W
YellowHall-U

Phase Wire Connections:

Phase Wire ColorFunction
GREENPhase -V
BLUEPhase -W
YELLOWPhase -U
Detailed wiring diagram for the motor and controller, showing connections for anti-theft, E-lock, P/Cruise, high/low speed, throttle, reverse, brake, SPA, SPD, and Hall sensors.
Figure 5.2: Product Wiring Diagram

After connecting the Hall and phase wires, connect your battery (not included) to the controller and turn on your battery.

5.2 Wiring for Counterclockwise Rotation (Left Side Motor)

If the motor is installed on the left side and requires counterclockwise rotation, use the following wiring configuration:

  • PHASE WIRE:
    • Yellow to Yellow
    • Blue to Green
    • Green to Blue
  • HALL WIRE:
    • Red to Red
    • Black to Black
    • Green to Green
    • Yellow to Blue
    • Blue to Yellow

5.3 Throttle Connection

Image of the LED throttle with key ignition and voltage display, showing its dimensions.
Figure 5.3: LED Throttle with Key and Voltage Display

6. Operation

6.1 Self-Learning Function

If your controller has self-learning functions, use it to match the device and ensure proper operation. Refer to your controller's manual for specific instructions on initiating the self-learning process.

6.2 Fardriver App for Controller Configuration

The Fardriver controller supports app-based configuration via Bluetooth. Download the Fardriver App to connect to the system and modify parameters.

For detailed instructions on using the Fardriver App, refer to the dedicated manual:

6.3 Enabling Reverse Function

If you wish to use the reverse function, it must be enabled within the FARDRIVER APP. Please set the parameters according to the following image:

Screenshot of the Fardriver APP settings, highlighting the 'Backward Pin: 0-NC' and 'BackEnable: 0 -> 1' options for enabling the reverse function.
Figure 6.1: Fardriver APP Settings for Reverse Function

7. Maintenance

7.1 Motor Cooling

The motor features an air cooling design to effectively prevent rapid temperature rise and protect motor life. During operation, avoid touching the motor with your body to prevent burns.

Close-up of the motor's heatsink fins, emphasizing air cooling for temperature regulation.
Figure 7.1: Motor Air Cooling Design

7.2 Sprocket and Motor Structure

The sprocket has been upgraded for increased robustness. The manufacturing process has been improved for strength, and motor quality inspection is strengthened. The motor features upgraded covers and a stronger structure with reinforced load-bearing areas and redesigned mounting holes for greater stability. A glossy surface replaces the previous matte finish, offering a more scratch-resistant and sleek appearance.

Comparison images showing the upgraded front and rear covers of the motor, highlighting reinforced load-bearing areas and a new glossy finish.
Figure 7.2: Motor Upgrades - Covers and Structure
Before and after images illustrating the updated motor shaft and increased width, with measurements.
Figure 7.3: Updated Shaft and Increased Width

8. Troubleshooting

If the motor does not work properly, follow these steps:

  1. Controller Compatibility: Ensure your controller is compatible with the motor (brushless and has self-learning or programming functions).
  2. Wiring Check: Verify that all wiring is connected correctly and that the phase wires match appropriately.
  3. Parameter Check: Review the phase angle, voltage, poles, temperature sensor, and RPM settings for correctness.
  4. Contact Support: If issues persist, contact our after-sales team for assistance.

9. User Tips

  • Battery Selection: For optimal performance, ensure your battery can consistently deliver at least 60A, with a peak capacity of up to 100A. This will allow the motor to reach its peak performance.
  • Power Output: The KR5V V2 motor is a powerful unit, capable of delivering significant acceleration and speed for electric motorcycles, scooters, and bicycles.
  • Controller Programming: Utilize the Fardriver App for fine-tuning controller parameters to match your specific vehicle and riding preferences.

10. Frequently Asked Questions (FAQ)

Q: What battery specifications are needed to run this kit?
A: You will need a battery that can provide the rated voltage of 72V and deliver a continuous current of at least 60A, with a peak current capability of 80-100A to ensure the motor reaches its full potential. For adult-sized quad bikes, a robust battery with these current capabilities is essential.
Q: Is the Kunray KR5V waterproof?
A: The Fardriver controller has an IP67 waterproof rating, indicating it is highly resistant to dust and water immersion. The motor itself has an IP54 rating, meaning it is protected from dust and splashing water from any direction. While durable, it is not recommended for full submersion.
Q: Does the kit come with a Bluetooth tuning module/dongle?
A: The Fardriver controller has Bluetooth built-in, allowing direct connection to the Fardriver App on your smartphone for tuning and parameter modification. A separate dongle is not typically required for this functionality.

11. Warranty & Support

The motor comes with a one-year warranty period. Accessories have a three-month free replacement policy for quality problems. Manufacturer codes are added to the motor case for better after-sales service tracking.

For any questions or support, please contact:

If you have any questions, please feel free to contact customer service. Customer service will help you solve the problem. Please do not raise any disputes. Thank you for your cooperation.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.